NEUTRIK StageBox User manual

Assembly Instructions
StageBox
Modular Connector Box System
1.
2. A
B
3.
4.
1 = shield
2 + 3 = signal wires
Assemble strain relief into the end piece with
the hole.
Slide the bushing onto the cable.
Insert the cable into the strain relief.
Prepare the cable according to the drawing.
Insert the wire per channel into the cable clamps
of each connector, check the channel numbering
and the pin numbering of the XLR:
Q
Q
A
B

1
2
L for Size
1 = 180 mm [7.0”]
2 = 300 mm [11.8”]
3 = 420 mm [16.5”]
max
3
4

Draft. Nr.: Update: 21.06.20073102M0621 Data subject to change without prior notice. 2007 NEUTRIK . ALL RIGHTS RESERVED.©®
6. Preassemble the frames and the end piece with
attached self tapping screws.
Insert the rear plate.
5. Connect the remaining cables with the connector
plates.
- Female plates for INPUTS
- for RETURNSMale plates
7. A
B
Slide in the assembled connector plates into
the extensions and screw on the end piece
with 4 screws.
Tighten the bushing of the strain relief.
INFORMATION
Type A Type B Type C
Length 1 Length 2 Length 3
Accessories: Matching luminescent self-adhesive stickers, labelling groups
of 4 connectors in individual row numbers for IN and OUT are
available as accessories.
”” ” ”
Assembled
Stage Box
SLIDE IN
132 120
252 120 372 120
A
B
P
P
R
N E U T I K R
R
CONNECTING THE WORLD
NEUTRIK AG
NEUTRIK Zürich AG
NEUTRIK USA Inc.
NEUTRIK UK Ltd.
()
LI
CH
USA
UK
T: F:
T: F:
T: F:
T: F:
+423 / 237 24 24 +423 / 232 53 93
+41 44 / 736 5010 +41 44 / 736 5011
+1 732 / 901 9488 +1 732 / 901 9608
+44 1983 / 811 441 +44 1983 / 811 439
NEUTRIK
NEUTRIK France
NEUTRIK Tokyo Ltd.
NEUTRIK
Vertriebs GmbH
Ltd.Hong Kong
DE / NL / AT
FR
JP
HK
T: F:
T: F:
T: F:
T: F:
+49 8131 / 280 890 +49 8131 / 280 830
+33 1 / 4131 6750 +33 1 / 4131 0511
+81 3 / 3663 4733 +81 3 / 3663 4796
+852 / 2687 6055 +852 / 2687 6052
www.neutrik.com

5
6
7
8