NEUTRIK etherCON TOP NE8MX-TOP User manual

Cut cable end approx. 45°.
Slide the bushing over the cable.
To ease the boot assembly apply some
cable pulling lubricant to the cable ends.
Assembl the RJ45 plug on the cable.e
Cut off release tab of RJ45 plug.the
Put chuck onto the cable.the
Align the opening with the contact side.
Position the RJ45 in the chuck.
Attention:
RJ45 must be straight.
Special versions must engage in the
inner recess of the chuck.
A
B
A
ASSEMBLY INSTRUCTION
®
etherCON TOP NE8MX-TOP
|
Ruggedized RJ 45 Data Connector, IP65 and UL50E
C1
R
B
CC
D
Page 1BDA 547
~45°
E
STANDARD
VERSION
SPECIAL
VERSION
D
1
2
C1
E
1
2
1
E
IP 65 RATED AND UL50E APPROVED.

Position the bushing onto the chuck.
Slide the unit (insert and boot) into the
housing and tighten the bushing.
Attention:
Screw the bushing to the end of the thread.
CAUTION:
There is no overlap allowed.
www.neutrik.com
NEUTRIK AG LI T: +423 / 237 24 24 F: +423 / 232 53 93
NEUTRIK USA Inc. USA T: +1 704 / 972 3050 F: +1 704 / 438 9202
( )
NEUTRIK UK Ltd. UK T: +44 1983 / 811 441 F: +44 1983 / 811 439
NEUTRIK Vertriebs GmbH DE / NL / AT/DK T: +49 8131 / 280 890 F: +49 8131 / 280 830
NEUTRIK France FR T: +33 1 / 4131 6750 F: +33 1 / 4131 0511
NEUTRIK Tokyo Ltd. JP T: +81 3 / 3663 4733 F: +81 3 / 3663 4796
NEUTRIK Hong Kong Ltd. HK T: +852 / 2687 6055 F: +852 / 2687 6052
NEUTRIK India Pvt. Ltd. IND T: +91 / 982 05 43 424 F: +91 / 22 26163 540
R
Draft. Nr.: BDA 547 Update: 06.09.2018 Data subject to change without prior notice. 2018 NEUTRIK . ALL RIGHTS RESERVED. NEUTRIK are registered trademark.
I I ® ®
©
Page 2
etherCON NE8MX-TOP
I
G
0.0 mm
EE
F
®
Find more etherCON
details on
www.neutrik.com.
STANDARD
VERSION
SPECIAL
VERSION
G
®
FINISHED etherCON
F