NEUTRIK NL8FC speakON User manual

Place the bushing (1) and the chuck (2) over
the cable.
Bushing (a) with reducing sleeve (b):
8.0 - 15.0 mm [0.315" - 0.591”]
Bushing (a):
15.0 - 20.0 mm [0.591" - 0.787”]
Prepare the cable as shown.
Cable O.D.: 8.0 - 20.0 mm [0.315" - 0.787”]
2
Wire size: 4 mm (AWG 12)
Insert the wires into the terminals and fasten
the clamping device with a screw driver
(POZIDRIV # 1).
®
Max. torque 0.5 Nm (0.37 lb-ft).
Slide the chuck (1) onto the insert.
Important:
Align the chuck by positioning the nose into (a)
the recess.
A
B
C
D
A
B
C
ASSEMBLY INSTRUCTION
®
NL8FC speakON - Lockable Loudspeaker Connector
R
BDA 456 Page 1
D
8 mm [0.315"]
ð
1.
2.
a
b
25 mm [0.984"]
Torque Value 0.5 Nm
POZIDRIV® #1
3+
2-
4+
2+
1-
1+
4-
3-
1+
4-
1-
2+
4+
3-
3+
2-
WIRING
1.
a

ASSEMBLY INSTRUCTION speakON NL8FC
I
www.neutrik.com
NEUTRIK AG LI T: +423 / 237 24 24 F: +423 / 232 53 93
NEUTRIK USA Inc. USA T: +1 704 / 972 3050 F: +1 704 / 438 9202
( )
NEUTRIK UK Ltd. UK T: +44 1983 / 811 441 F: +44 1983 / 811 439
NEUTRIK Vertriebs GmbH DE / NL / AT/DK T: +49 8131 / 280 890 F: +49 8131 / 280 830
NEUTRIK France FR T: +33 1 / 4131 6750 F: +33 1 / 4131 0511
NEUTRIK Tokyo Ltd. JP T: +81 3 / 3663 4733 F: +81 3 / 3663 4796
NEUTRIK Hong Kong Ltd. HK T: +852 / 2687 6055 F: +852 / 2687 6052
NEUTRIK India Pvt. Ltd. IND T: +91 / 982 05 43 424 F: +91 / 22 26163 540
R
Draft. Nr.: BDA 456 Update: 15.07.2015 Data subject to change without prior notice. 2015 NEUTRIK . ALL RIGHTS RESERVED. NEUTRIK are registered trademark.
I I ® ®
©
EE Slide the insert and the chuck (1) into the
housing (2).
Important:
Pay attention to the guiding keyway!(b)
Fasten the bushing with a fork wrench 1 1/16”
(SW 27), max. Torque 3.5 Nm (2.58 lb-ft).
F
b
2.
1.
F
FINISHED speakON
NL8FC
Wrench size
1 1/16" (SW27)
Torque Value 3.5 Nm
Find more details of speakCON on www.neutrik.com.
Attention:
speakON is NOT to be used as an AC mains or power
supply connector!