NEUTRIK FIBERFOX EBC25 User manual

HANDLING INSTRUCTION
FIBERFOX Fiber Chassis Connector EBC25
|
2 & 4-channel
R
Page 1BDA 696
CAUTION:
Laser radiation CLASS 1. Do not look directly into beam of light!
A Chassis / InspectionConnector Cleaning
Tools: Distilled water
Dust remover (Air in a can)
STICKLERS Clean STIXX MCC-EB12 - Expanded Beam Lens
Disconnect both cable ends for safety
reasons.
Do not stare into beams or view directly with
optical instruments.
Remove the protection cap.
Check the lenses for contamination.
If there is no visible contamination.
®No cleaning necessary.
A– small contamination:
Use the dust remover to apply air to the lenses.
A
B
C
D
B
NO2M4JW-FG
NO4M4JW-FG
D
C
AIR
A
X
NO4M4JW-FGNO M4JW-FG2
ð

HANDLING INSTRUCTION - 2 & 4-channel Chassis Connector EBC25 FIBERFOX
I
Page 2
E
F
B – heavy contamination:
Mtoisten the ip of the STICKLERS Clean STIXX
with some drops of .destilled water
Atpply the moistened ip to the lens.
Remove dust residuals by rotating the tip of the
swab.
Rotate the swab six to eight times in one direction.
Dry the entire surface with a lint-free wipe or a
similar material.
After cleaning the lenses apply the protection cap.
DESTILLED
WATER
NO4M4JW-FGNO M4JW-FG2
6-8x
Clean STIXX
E
F
GG
H
H
NO4M4JW-FGNO M4JW-FG2
www.neutrik.com
Data subject to change without prior notice. 20 NEUTRIK ALL RIGHTS RESERVED23 . NEUTRIK are registered trademark of Neutrik AG. .©®®
Neutrik AG LI-9494 Schaan
I
A brand of the Neutrik Group
Draft. Nr.: BDA 696 V1
Update: 2023-07-19
Find more details on
www.neutrik.com