NEUTRIK Speakon SPX Series User manual

Lockable Loudspeaker Connector
Speakon SPX Series
®
NL4FX / NL4FRX
Assembly of the Connector:
INFO to the screw driver:
Place bushing and chuck over cable.
Prepare cable as shown.
Insert wires into terminals and secure clamp
terminals with screw driver (Pozidrive ).
For easy wiring especially on big cables, first
screw on the inner conntacts 1+ and 2+ and
afterwards the outer contacts 1- and 2- !
Push chuck up to housing .
Tighten the bushing
Important is the stripping length of 25 mm and
12 mm.
Pozidrive #1 Philips
®
Important: Align the chuck by positioning
the nose into the recess.
DO NOT USE!
Assembly Instructions
12 mm [0.5"]
25 mm [1.0"]
-1-
A
B
C
D
E
A
B
C
F
F
2+
1+
1-
2-
2+ 2-
1- 1+
D
E

Assembly of the Conversion Kit:
Handling:
Open the bushing.
Slide the bushing and the chuck back.
Bend the cable as shown.
Position the two conversion shells to fit on
the connector thread.
Press together and fix by screw.
Slide the chuck onto the housing and fasten
the bushing.
Engagement:
Separation:
Important: Align the chuck by positioning
the nose into the recess.
A
B
C
D
E
A
B
C
D
E
F
F
1.
2.
3.
LIECHTENSTEIN
1.
2.
Data subject to change without prior notice. 2003 NEUTRIK . ALL RIGHTS RESERVED.©®
R
N E U T I K R
R
CONNECTING THE WORLD
NEUTRIK AG NEUTRIK Zürich AG NEUTRIK (UK) Ltd. NEUTRIK USA INC. NEUTRIK Tokyo Ltd. NEUTRIK France NEUTRIK Vertriebs GmbH
Liechtenstein Great BritainSwitzerland USA Japan France Germany / Netherlands
Tel.: [phone] Tel.: [phone] Tel.: [phone] Tel.: [phone] Tel.: [phone] Tel.: [phone] Tel.: [phone]
Fax: [phone] Fax: [phone] Fax: [phone] Fax: [phone] Fax: [phone] Fax: [phone] Fax: [phone]
www.neutrik.com
Draft. Nr.: BDA 114
Update:
/3102M1171
31.07. 2003
-2-
F