New Holland VM3080 Operating instructions

NEW HOLLAND
VM3080
VL5060
VL5070
VL5080
REPAIR MANUAL

Find manuals at https://best-manuals.com

1
87613077B -- 07 -- 2008
R1_04 08
Machine name change
Correspondence
Previous name New name
VL 550 Up to series 008 VL 5080 Starting from series 009
VL 540 Up to series 008 VL 5060 Starting from series 009
VL 530 Up to series 008
VM 340 Up to series 008 VM 3080 Starting from series 009
Find manuals at https://best-manuals.com

2
87613077B -- 07 -- 2008
Find manuals at https://best-manuals.com

3
87613077B -- 07 -- 2008
REPAIR MANUAL
CONTENTS
Section Description
Specifications
00 Maintenance
05 Preparing the machine
10 Thermal engine
29 Hydrostatic transmission
33 Brakes
35 Hydraulic system
39 Frame
41 Steering
44 Front axles and wheels
50 Cab
55 Electrical system
58 Harvesting equipment
60 Product feeding
74 Cleaning
80 Hoppers
88 Accessories (multipurpose)
NOTE: corresponding to machines starting from series 002.
Find manuals at https://best-manuals.com

4
87613077B -- 07 -- 2008
Find manuals at https://best-manuals.com

SPECIFICATIONS 1
87613077B -- 07 -- 2008
SPECIFICATIONS
Chapter 1
CONTENTS
Section Description Page
Machine identification data 3.....................................................
Self--propelled machine technical data 5...........................................
Harvesting equipment technical data 11............................................
Find manuals at https://best-manuals.com

2SPECIFICATIONS
87613077B -- 07 -- 2008
Find manuals at https://best-manuals.com

SPECIFICATIONS 3
87613077B -- 07 -- 2008
MACHINE IDENTIFICATION DATA
Model Type Serial no. Machine number
VL5080 653 009 001
VL5070 653 009 001
VL5060 653 009 001
VM3080 633 009 001
NOTE: the harvesting equipment number is the same as the self--propelled machine one.
A = manufacturer’s label
B = stamped frame number
OPERATOR’S MANUAL
Reference: 87612986 (GB)
SPARE PART CATALOGUE
Reference:
Find manuals at https://best-manuals.com

4SPECIFICATIONS
87613077B -- 07 -- 2008
H1
H2
Lo1
EDAR
DAV1
H3
HB1
HB2
HB3
DAV3
DAV2
Lo2
La 1
H4
V1
La AR
Gb
La 3
La AV
V2
La 2
1800 litres
2160 litres
2360 litres
La B2
La B1
HB4
HB5
Gb
Find manuals at https://best-manuals.com

SPECIFICATIONS 5
87613077B -- 07 -- 2008
COMMERCIAL DESCRIPTION VL5080 / 5070 /
5060
VM3080
Code DIMENSIONS (mm)
H1 Height: without cab
(at the revolving beacon)
3160
(3745)
3040
(3615)
H2 (harvesting equipment on
the ground)
with cab
at the revolving beacon 3605 3475
H3 Harvesting equipment height at the railings 3285 3185
H4 Clearance under the harvesting equipment from 1950 to 2450 from 1800 to 2300
HB1 Clearance under tilted up hoppers 1730 1600
HB2 Tilting axle height 2110 1980
HB3 Max. height with lifted hoppers 4620 4490
HB4 Clearance under the
frame
hoppers, 1800 litres 1700 1550
HB5 Clearance under the
frame
hoppers, 2160 litres
hoppers, 2360 litres
-- -- -- --
1150
1150
-- -- -- --
EPitch 2760
La1 Max. width at the hoppers, 2360 litres 3000 2800
hoppers 2360 litres + cab 3000 2800
La2 Max. width from cover to
cover
Only self--propelled
machine
2540 2340
c
o
e
La3 Max. width from cab top
to right cover
Only self--propelled
machine
2750 2540
t
o
g
t
c
o
e
LaB1 Hopper width 1800 litres 2480 2290
LaB2
p
p
2160 litres
2360 litres
-- -- -- --
3000
2800
-- -- -- --
La Outer width at the rear Tyres 11.2 R24 (1) -- -- -- -- 1680 + 291 = 1971
AR wheels: Tyres 11.2--24 T35 -------- 1680 + 305 = 1985
e
e
s
(
V
1
+
G
b
=
L
a
A
R
)
Tyres 340/85 R24 -------- 1780 + 366 = 2146
(
V
1
+
G
b
=
L
a
A
R
)
Tyres 420/70 R24 2090 + 431 = 2521 -- -- -- --
Tyres 460/70 R24 2120 + 462 = 2582 -- -- -- --
Tyres 480/65 R24 (2) 2120 + 484 = 2604 -- -- -- --
La
A
V
Outer width at the front
h
l
l
l
d
Tyres 280/70 R20 -- -- -- -- 1720 + 275 = 1995
A
V
wheel level on ground:
(
V
2
+
G
b
=
L
a
A
V
)
Tyres 320/70 R20 1920 + 315 = 2235 1720 + 315 = 2035
(
V
2
+
G
b
=
L
a
A
V
)
(V2 at ground level)
Lo1 Max. length
w
i
t
h
o
u
t
(
w
i
t
h
)
d
e
s
-
without cab 4900 (5090)
Lo2 w
i
t
h
ou
t
(
w
i
t
h
)
d
es-
temmers with cab 4990 (5180)
DAV1 Front offset without cab 880
DAV2 with cab 970
DAV3 Offset of front supports for multipurpose 40
DAR Rear offset without (with) destemmers 1260 (1450)
NOTE: in road position, the noria is at 200 mm from the ground
(1) not produced anymore
(2) an additional equipment with destemmers on a VL5080 equipped with upper and lower extractors and
tyres 480 / 65 R 24 is not allowed.

6SPECIFICATIONS
87613077B -- 07 -- 2008
COMMERCIAL DESCRIPTION VL VM
5080 5070 5060 3080
WEIGHTS
PTAC -- Total allowed weight under load (kg) 8000 7800
Partition Front axle (kg)
Rear axle (kg)
3400
from 4960 to 5200
4700
from 3100 to
3400
from 4600 to
4800
Empty weight (kg) with harvesting equipment
-- with hoppers (litres),
standard wheels and cab, but without des-
temmers and without lower extractors.
-- with destemmers, add .... (kg)
6940
2400
580
6600
1800
580
6440
2200
580
Weight of one wheel (kg)
Thermal engine weight (kg)
FEEDING / EXHAUST
Fuel tank Capacity (litres) 160
Engine (cylinders) --
-- ISO power (kW/CV)
4
94/128
4
74/100
4
94/128
-- Displacement
(cm3/rev.)
4485
Air filter Make DONALDSON
Type FPG090225 FPG090225 FPG090225
Engine cooling Water capacity (litres)
Fan D
Air/air intercooler D*D
NOTE: *only with TIER 3 engine

SPECIFICATIONS 7
87613077B -- 07 -- 2008
COMMERCIAL DESCRIPTION VL VM
5080 5070 5060 3080
DRIVE
Variable displacement inch-
ing hydraulic pump
Make
Displacement elimination
Control
Total displacement (cm3/rev.)
REXROTH A4VG90
D
control
90
Priming pump Displacement (cm3/rev.)
Capacity (l/minute), output 0.9
25
56.25
Front wheel motor Make
Type
Displacement (cm3/rev.)
POCLAIN
MSE 05
688
Rear wheel motor Make
Type
Displacement (cm3/rev.)
POCLAIN
MSE 11
843/843
Double steering valve D
Front drive wheels in road position D
”Twin lock” antiskid D
Torque decrease on front wheels optional
Max. speed in road position (km/h) 25
Max. speed in field position (km/h) 11
Hydraulic oil
Capacity (litres)
Oil type
Reservoir
New Holland
65
Hydrosystem 68
Hydrosystem 68 BIO S
Hydraulic filtering (intake/return) D

8SPECIFICATIONS
87613077B -- 07 -- 2008
COMMERCIAL DESCRIPTION VL VM
5080 5070 5060 3080
DRIVE (follows)
Conveyor and extractor
pump
Make
Displacement (cm3/rev.)
Empty operating speed (rpm)
Capacity (l/minute), output 0.9
SAUER
44
engine speed
99
Double pump
-- for shaking
Make
Displacement (cm3/rev.)
Empty operating speed (rpm)
Capacity (l/minute), output 0.9
SAUER
22
(1.02 x engine speed)
50.49
-- for steering/
lifting/hoppers
Displacement (cm3/rev.)
Empty operating speed (rpm)
Capacity (l/minute), output 0.9
11
(1.02 x engine speed)
25.24
STEERING Hydrostatic
Type Make
Displacement (cm3/rev.)
EATON
100
Service brake Supplied by the hydrostatic transmission
Parking brake
(acting on the two rear wheels) D
Park brake manual control, on the left
Electrically--operated independent brakes No

SPECIFICATIONS 9
87613077B -- 07 -- 2008
COMMERCIAL DESCRIPTION VL VM
5080 5070 5060 3080
TILTING CORRECTION
Max. tilting (%) 25
Max. tilting in road position (%) 8
Max. tilting in work position (%)
(with destemmers or special implements and front wheels
with ballasts)
32
FRAME
Harvesting header quick uncoupling No
Link fitting possibility D
Front and rear tracks = see relevant SB D
PLATFORM CAB
Heated and A/C cab, optional Optional
Activated charcoal filter Available as spare part
ELTEC control panel No
MC control panel D
Pneumatic seat, optional D
Multifunction lever: number of push buttons 11
Electrical inching control, adjusted through sensors D
Electrical presetting for:
-- electrically--operated rear view mirrors (with cab)
-- CDHA
-- rear viewing
D
No
No

10 SPECIFICATIONS
87613077B -- 07 -- 2008
COMMERCIAL DESCRIPTION VL VM
5080 5070 5060 3080
LIGHTING AND WARNING LIGHTS
High/low beams 2
Front parking lights 2
Rear parking lights 2
Direction indicator
lights
Front
Rear
Side
2
2
2
Stop lights 2
License plate light 1
Reflector Rear 2
Revolving beacons 2
Supply voltage (V) 12
Alternator (A) 120
Battery
Starting presetting
(Ah)
(A)
135
760
92
495
135
760

SPECIFICATIONS 11
87613077B -- 07 -- 2008
COMMERCIAL DESCRIPTION VL VM
5080 5070 5060 3080
HARVESTING EQUIPMENT
HARVESTING HEADER
Harvesting header hour counter No
Type -- swinging, self--aligning D
SDC shaking system D
Number of shakers 14 12 12 10
Straight/elbow flexible connecting rod 13/1 11/1 11/1 9/1
Shaking start Motor SAUER EATON
Displacement
(cm3/rev.)
22 46
Reducer control unit:
-- r a t i o
-- grease (kg)
AMBRA GR75MD
D
1/4
1.2
No
Chain D
Toe--in adjustable from the operator’s seat DNo
Amplitude settings 3
Removable shakers, optional DNo
Min. clearance under the frame (mm) 1950/2450 1800/2300
Grape harvesting useful height (mm) 1050 900
Harvesting tunnel width (mm) 500
RECEIVING / TRANSPORTATION
Noria system Large buckets
Small buckets
Fastening by rivets
Drive gears
55
2x2
17/58
52
1x3
16/59
Width of flexible stake--guides (mm) 195/265 165/235
Tightness length (mm) 1750
Harvesting min. height (mm) 150

12 SPECIFICATIONS
87613077B -- 07 -- 2008
COMMERCIAL DESCRIPTION VL VM
5080 5070 5060 3080
HARVESTING EQUIPMENT (follows)
Operation Motor
Displacement
(cm3/rev.)
EATON
395
Harvesting conveyors Width (mm)
Speed (rpm) max.
Reverse
450
D
Single operation Motor
Displacement
(cm3/rev.)
EATON
31.6
CLEANING
2 upper extractors with removable
stalk choppers
Diameter (mm)
Motor
Displacement
(cm3/rev.)
Speed adjustment:
electrically--operated
430
SAUER
11
D
2 lower extractors (optional) Diameter (mm)
Motor
Displacement
(cm3/rev.)
Speed adjustment:
electrically--operated
430
SAUER
6
D
No
2 independent stalk choppers, en-
abled by noria in proportional
Motor
Displacement
(cm3/rev.)
EATON
8.2
HOPPERS
Capacity (litres) 2 x 900 2 x 900
-- -- -- -- 2 x 1080
2 x 1180 -- -- -- --
Distribution auger Motor
Displacement
(cm3/rev.)
Adjustable speed
EATON
31.6

SECTION 00 -- MAINTENANCE -- CHAPTER 1 1
87613077B -- 07 -- 2008
SECTION 00 -- MAINTENANCE
Chapter 1
CONTENTS
Section Description Page......................................................
Lubricant and liquid capacities 2..................................................
Thermal engine maintenance 3...................................................
Remaining grease points 5.......................................................
Machine washing 7..............................................................
Hydrostatic and hydraulic system maintenance 11...................................
Routine maintenance and winter storage 13........................................

2SECTION 00 -- MAINTENANCE -- CHAPTER 1
87613077B -- 07 -- 2008
LUBRICANT AND LIQUID
CAPACITIES
Item to be supplied
Quantity
dm3
(litres)
Recommended product
Corresponding
international
classification
Self--propelled machine
grease fittings
Grease
AMBRA GR 9
Lithium--calcium based
grease, consistency NLGI 2
Harvesting machine grease fit-
tings
Grease
Food t
y
p
e
24 cartridges
re. 62777339
Noria ECU 1
F
o
o
d
t
y
p
e
r
e
.
6
2
7
7
7
3
3
9
Shaking rear connecting rod
articulations
Grease Teflon silicone grease
Sitef degree 3
410--g cartridge, re.
920019780
Shaking ECU 1.2 kg GR 75 MD
NH 720 A
Re. 661874
molybdenum bisulfide grease,
consistency NLGI 2
Engine sump and filter/s
4--cylinder engine 9.5
Oil
AMBRA MASTER GOLD
HSP
15W -- 40
SAE 15W40
NH 330H
API CI -- 4CH -- 4
ACEA E3/E5
Reservoir 65 Oil
AMBRA
HYDROSYSTEM 68
ISO 68
DIN 51524 -- part 2
Cooling system 20 AMBRA
AGRIFLU (50%) +
clean water (50%)
NOTE: the integrated joints of the rear shaking flexible connecting rods do not require greasing.