Next MODULAR II OAK ROBE 903459 User manual

We’re conÎdent you’ll love your gorgeous new Next
furniture. However, it’s worth making absolutely certain
before you put it all together.
So, let’s quickly run through these three steps:
TIPS FOR RETURNS
Not completely happy with the product? No problem.
We just need everything back in the original packaging, so follow the steps below
and this will ensure a super-smooth returns process and no delay to your refund.
1. COLOUR
Make sure you’re happy with the colour
No need to unpack everything, just check the first component.
2. PROTECTIVE PACKAGING
If you’re happy, then it’s time to get opening! Start by laying everything out
on the protective packaging – this will prevent anything getting scratched.
3. PARTS PAGE
Finally, double check you have all the pieces by referencing
the parts page of the instructions.
tCheck everything is there (the ‘parts page’
is a handy checklist).
tPop all the loose fittings and fixtures into
the packaging provided or tie them up in a
plastic bag.
tWrap all the big components back
up in the original protective packaging.
tClose up the box and seal it securely
(don’t be afraid to use plenty of tape).
DO DON’T
tLeave anything assembled -
all components should be dismantled
and separately packed.
tPut loose fixtures and fittings straight
into the box.
tThrow it back in the box carelessly –
as it may get damaged.
Then just give us a call on 0333 777 8999 and we’ll sort out a pick up time for you.
BEFORE YOU GET
STARTED...

Need Help?
With: Assembly instructions
Missing or damaged parts
CALL: 0333 777 8999
IMPORTANT - RETAIN FOR FUTURE REFERENCE
Produced in Poland for Next Retail Ltd
903459-2015-V2
Actual product size
H186x W80x D58cm
MODULAR II OAK ROBE
903459
Assembly instructions

1
Produced in Poland for Next Retail Ltd
903459-2015-V2
MODULAR II OAK ROBE
903459
Assembly instructions
BEFORE YOU START
Don’ts
Do not drag or pull your furniture.
Do not use silicone based furniture polish. Silicone in furniture
polishes can break down the finish.
Never allow any kind of liquid to remain on your furniture.
Absorption can cause wood to warp or finishes to de-laminate.
Do not place hot items (e.g. hot drinks) directly on to the wood
surface. Please make sure you use a placement or coaster
Do’s
We suggest you spend a short time reading through this leaflet
before you start.
right tools and plenty of space.
Unwrap all packaging materials and place the components
on a clean surface to protect them from damage.
We recommend that the packaging is used to protect the
surfaces during assembly.
Carefully check that you have all the parts before beginning
assembly.
Due to the size of the product we recommend that it is
assembled in the room intended for use.
Ensure the product is fully assembled as illustrated and all
fixings are fully tightened before use.
Wipe occasionally with a soft cloth slightly dampened with
water. Then buff with a dry clean soft cloth.
Wood will mellow and change colour over time, we recommend
that ornaments and items placed on the surface are moved
regularly for the first few months to prevent uneven mellowing.
When you are ready to start, make sure that you have the
Warnings
We suggest you retain these instructions for future reference.
Keep fittings out of children’s reach and keep children well
away from the construction area.
This product should only be used on firm, level ground.
Please periodically check all fittings and re-tighten as
necessary.
Please do not sit or stand on your furniture.
Avoid exposing the furniture to excessive heat or direct
sunlight as this can cause deterioration of the colour.
PH2
Number of people required to assemble
Two persons are required to assemble this item.
Time to assemble
2 hours
Tools required
not supplied not supplied
Missing parts
If you are missing any fixtures and fittings for your product
please contact our customer service team on 0333 777 8999
and they will be happy to arrange for a replacement to be sent
to you free of charge.
Home service technicians
If you have a fault with your product please contact our
customer service team on 0333 777 8999. If you have had the
product for 28 days or less you may be offered a replacement,
refund or for a fully trained home service technician to visit your
home to assess the fault and repair the product where possible.
If you have had the product for more than 28 days we will send
an independant home service technician to review and repair
the product where possible and recommend further action.
You can write to us at
Home Customer Services
Next Retail Ltd,
Desford Road,
Leicester,
LE19 4AT
To View our full furniture range please visit www.next.co.uk
PRODUCT SUPPLIED WITH WALL FIXINGS

GETTING TO KNOW YOUR PRODUCT
Produced in Poland for Next Retail Ltd
903459-2015-V2
MODULAR II OAK ROBE
903459
Assembly instructions
Components supplied. Please use this guide if you require replacement parts.
Ref Dimensions Visual QtyCtn
M73-101 183 x 56cm 1 1
183 x 56cm 1 1
1 280 x 58cm
1 2
77 x 55cm
1 2
M73-102
M73-401
M73-402
Ref Dimensions Visual QtyCtn
2 1
77 x 56cmM73-403
2 2
176 x 40cmM73-601
1 1176 x 77cmM73-001
M73-401
M73-402
M73-101
M73-102
M73-403
M73-801
M73-001
M73-601
M73-601
77 x 6cmM73-801
2

Produced in Poland for Next Retail Ltd
903459-2015-V2
MODULAR II OAK ROBE
903459
Assembly instructions
Fixtures and fittings
supplied (actual size)
Ref Dimensions Qty
A
B
C
D
F
P2
6 x 43 mm 12
15 x 11 mm 12
5 x 20 mm 12
8 x 30 mm 16
6.3 x 13 mm 12
3 x 13 mm 2
W26.3 x 11 mm
mm.
0. 10 10020 30 40 50 60 70 80 90 110 120 130
Fixtures and fittings supplied (not to scale)
Ref Dimensions Visual Qty
N/A
Ref Dimensions Visual Qty
I2
N/A
1
Ref Dimensions Visual Qty
J
N/A
10
Ref Dimensions Visual Qty
NN/A 4
Ref Dimensions Visual Qty
N/A 6
G4 x 22 mm 4
Ref Dimensions Visual Qty
PN/A 2
Ref Dimensions Visual Qty
N/A 2
K2
OU
Ref Dimensions Visual Qty
N/A 6
X
Ref Dimensions Visual Qty
N/A 1
Z1
S3.5 x 13 mm 16
Ref Dimensions Visual Qty
N/A 6
R
Ref Dimensions Visual Qty
IN/A 1
3

4
Produced in Poland for Next Retail Ltd
903459-2015-V2
MODULAR II OAK ROBE
903459
Assembly instructions
1
A
Panel Panel
CAM-LOCK
Tighten until shoulder is flush
with panel. Do not overtighten
or undertighten (see example below)
Shoulder
NO GAP
M73-401
Ax4
PH2
AA
D
Dx8
8x30mm
M73-402
D
D
D
DM73-403
D
D
D

5
Produced in Poland for Next Retail Ltd
903459-2015-V2
MODULAR II OAK ROBE
903459
Assembly instructions
2
M73-801
PH1
Nx4 Rx2
Dx4
8x30mm
D
D
M73-801
D
D
M73-403
II
M73-801
M73-801
R
I
N
S
Ix1
Sx16
3x13mm
3
Ix1

6
Produced in Poland for Next Retail Ltd
903459-2015-V2
MODULAR II OAK ROBE
903459
Assembly instructions
4
X
A
D
D
A
RA
A
D
D
R
Ax8
PH2
Dx4
8x30mm
Xx6
PH2
Rx4
M73-101
M73-102
X
A

7
Produced in Poland for Next Retail Ltd
903459-2015-V2
MODULAR II OAK ROBE
903459
Assembly instructions
5
PH2
Kx1
Wx1
6.3x11mm
6
K
W
M73-001
B
B
M73-101
M73-403
Bx4
PH2
B
B
CORRECT WRONG
WHEN FITTING CAMS
ENSURE STARTING POSITION IS CORRECT
BEFORE YOU INSERT CONNECTING CAM-PILLAR
TURN CLOCKWISE UNTIL SECURE

8
Produced in Poland for Next Retail Ltd
903459-2015-V2
MODULAR II OAK ROBE
903459
Assembly instructions
7
8
K
W
Bx2
PH2
Bx2
PH2
PH2
Kx1
Wx1
6.3x11mm
M73-102
M73-402
B
B