Next 434279 User manual

We’re confident you’ll love your gorgeous new Next
furniture. However, it’s worth making absolutely certain
before you put it all together.
So, let’s quickly run through these three steps:
TIPS FOR RETURNS
Not completely happy with the product? No problem.
We just need everything back in the original packaging, so follow the steps below
and this will ensure a super-smooth returns process and no delay to your refund.
1. COLOUR
Make sure you’re happy with the colour
No need to unpack everything, just check the first component.
2. PROTECTIVE PACKAGING
If you’re happy, then it’s time to get opening! Start by laying everything out
on the protective packaging – this will prevent anything getting scratched.
3. PARTS PAGE
Finally, double check you have all the pieces by referencing
the parts page of the instructions.
•Check everything is there (the ‘parts page’
is a handy checklist).
•Pop all the loose fittings and fixtures into
the packaging provided or tie them up in a
plastic bag.
•Wrap all the big components back
up in the original protective packaging.
•Close up the box and seal it securely
(don’t be afraid to use plenty of tape).
DO DON’T
•Leave anything assembled -
all components should be dismantled
and separately packed.
•Put loose fixtures and fittings straight
into the box.
•Throw it back in the box carelessly –
as it may get damaged.
Then just give us a call on 0333 777 8999 and we’ll sort out a pick up time for you.
BEFORE YOU GET
STARTED...

Need Help?
With: Assembly instructions
Missing or damaged parts
CALL: 0333 777 8999
Item no - Colour
434279 - WHITE
452613 - GREY
836782 - TEAL
162707 - PINK
IMPORTANT ─RETAIN FOR FUTURE REFERENCE
Assembly instructions
STUDIO BEDSIDE
434279 / 452613 / 836782 / 162707-2017-V1
Produced in Viet Nam for Next Retail Ltd.
H59 x W40 x D30cm
Actual product size

not supplied
PH2
1
434279 / 452613 / 836782 / 162707-2017-V1
Produced in Viet Nam for Next Retail Ltd.
STUDIO BEDSIDE
To View our full furniture range please visit www.next.co.uk
You can write to us at
Home Customer Services
Next Retail Ltd,
Desford Road,
Leicester,
LE19 4AT
Home service technicians
If you have a fault with your product please contact our customer service team on 0333 777 8999. If you have had the product for
28 days or less you may be offered a replacement, refund or for a fully trained home service technician to visit your home to
assess the fault and repair the product where possible. If you have had the product for more than 28 days we will send an
independant home service technician to review and repair the product where possible and recommend further action.
Missing parts
If you are missing any fixtures and fittings for your product, please contact our customer service team on 0333 777 8999, and they
will be happy to arrange for a replacement to be sent to you free of charge.
Number of people required to assemble
BEFORE YOU START
Assembly instructions
Time to assemble
15 minutes
Tools required
PRODUCT SUPPLIED WITH WALL FIXING STRAPS

2
4 x 44cm
40 x 30cm
4
2
11
CtnRef Dimensions Visual Qty
Components supplied. Please use this guide if you require replacement parts.
434279 / 452613 / 836782 / 162707-2017-V1
Produced in Viet Nam for Next Retail Ltd.
STUDIO BEDSIDE
Assembly instructions
GETTING TO KNOW YOUR PRODUCT
1
2
2
2
2

110100908070605040302010
mm
*Extra Fittings
Fixtures and fittings
supplied (actual size)
DimensionsRef Qty
1
AA
Visual QtyDimensionsRef
Fixtures and fittings supplied(not to scale)
M6
* Extra Fittings included
in case of loss or damage
*Extra Fittings
3
434279 / 452613 / 836782 / 162707-2017-V1
Produced in Viet Nam for Next Retail Ltd.
STUDIO BEDSIDE
Assembly instructions

4
434279 / 452613 / 836782 / 162707-2017-V1
Produced in Viet Nam for Next Retail Ltd.
STUDIO BEDSIDE
Assembly instructions

2
5
x4
434279 / 452613 / 836782 / 162707-2017-V1
Produced in Viet Nam for Next Retail Ltd.
STUDIO BEDSIDE
Assembly instructions
2
2
2
1
2

not supplied
PH2
3
6
We recommend the use of the wall strap provided for safety reasons. Wall
fixings are not included please source suitable fixings for your wall type. If in
doubt, please consult a qualified tradesperson. WARNING: Always ensure the
wall to be drilled is free from hidden electrical wires, water and gas pipes.
Wall
X
AA x 1 M6
434279 / 452613 / 836782 / 162707-2017-V1
Produced in Viet Nam for Next Retail Ltd.
STUDIO BEDSIDE
Assembly instructions

451mm
256mm
357mm
289mm
Actual product size
H59 x W40 x D30cm
7
434279 / 452613 / 836782 / 162707-2017-V1
Produced in Viet Nam for Next Retail Ltd.
STUDIO BEDSIDE
140mm
400mm
300mm
344mm
72mm

8
434279 / 452613 / 836782 / 162707-2017-V1
Produced in Viet Nam for Next Retail Ltd.
STUDIO BEDSIDE
Don’ts
Do not drag or pull your furniture.
Do not use silicone based furniture polish. Silicone in furniture polishes can break down the finish.
Never allow any kind of liquid to remain on your furniture.
Absorption can cause wood to warp or finishes to de-laminate.
Do not place hot items (e.g. hot drinks) directly on to the wood surface. Please make sure you use a placement or coaster.
Assembly instructions
Warnings
We suggest you retain these instructions for future reference.
Keep fittings out of children’s reach and keep children well away from the construction area.
This product should only be used on firm, level ground.
Please periodically check all fittings and re-tighten as necessary.
Please do not sit or stand on your furniture.
Avoid exposing the furniture to excessive heat or direct sunlight as this can cause deterioration of the colour.
Unwrap all packaging materials and place the components on top of the carton box or on a clean floor to protect it from damage.
Do’s
We suggest you spend a short time reading through this leaflet before you start.
When you are ready to start, make sure that you have the right tools and plenty of space.
Unwrap all packaging materials and place the components on a clean surface to protect it from damage.
We recommend that the packaging is used to protect the surfaces during assembly.
Carefully check that you have all the parts before beginning assembly
Due to the size of the product we recommend that it is assembled in the room intended for use.
Ensure the product is fully assembled as illustrated and all fixings are fully tightened before use.
Check fixings regularly to ensure they remain tight
Wipe occasionally with a soft cloth slightly dampened with water. Then buff with a dry clean soft cloth.
Wood will mellow and change colour over time, we recommend that ornaments and items placed on the surface are moved
regularly for the first few months to prevent uneven mellowing.