Next 845600 User manual

WHITE HIDEAWAY
`845600
Assemblyinstructions
This child’s bed conforms to BS EN 747:2012
WARNINGS Number of people required to assemble
We suggest you retain these instructions for future reference. Two persons are required to assembled
Keep fittings out of children’s reach and keep children well away from
construction area. Time of assemble
This product should only be used on firm level ground.
Please periodically check all fittings and re-tighten as necessary.
Please do not jump or stand on your bed Avoid exposing the furniture to
excessive heat or direct sunlight as this can cause damage to the materials and
deterioration of the colour
Missing parts
IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.
BEFORE YOU START
Missing
parts
Do’s How service technicians
We suggest you spend a short time reading through this leaflet before you start.
When you are ready to start, make sure that you have the right tools and plenty
of space.
Due to the size of the product we recommend that it is assembled in the room
intended for use.
Unwrap all packaging materials and place the components on a clean surface
to protect it from damage,
We recommend that the packaging is used to protect the surfaces during
assembly.
Carefully check that you have all the parts before beginning assembly.
You can write to us at
Ensure the product is fully assembled as illustrated and all fixings fully tightened
before use. Check fixings regularly to ensure they remain tight. Home customer services
NextRetailLtd,
Desford Road,
Leicester,
LE19 4AT
To View our full furniture range please visit www.next.co.uk
When adjusting the support legs ensure that the foot is set 5-10mm from the
floor surface without the mattress in place. When in use the legs will create the
required support for the product.
Never allow any kind of liquid to remain on your furniture. Absorption can cause
materials to warp or finishes to de-laminate .
Wipe occasionally with a soft cloth dampened with water. Then buff with a dry
clean soft cloth
If you are missing any fixtures and fitting for your products, please contact
our customer service team 0333 777 8999 and they will be happy to arrange
for replacement to be sent to you free of charge.
If you have a fault with your product please contact our customer service team
on 0333 777 8999. If you have had the product for 28 days or less you may be
offered a replacement, refund or for a fully trained home service technician to
visit your home to assess the fault and repair the products where possible. If
you have a product for more than 28 days we will send and independent home
service technician to review and repair the product where possible and
recommend further action.
When moving your assembled bed. It is best to lift the bed and never to drag it.
Please check that the centre support rail is securely fixed in place.
ProducedinVietnamforNextRetailLtd. 2
845600‐2014‐V1