Next 888889 User manual

Tools Needed
Helpline
If you have any problems with this product or
require any replacement fittings please contact
Customer Services Tel: [phone]
• All assembly fittings should be tightened properly before use and should be periodically checked and re-tightened if
required.
•When fitted, there must be a maximum gap of 30mm between the mattress and the sides and ends and the ends of the
child's bed.
ASSEMBLY INSTRUCTIONS.
IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.
Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is found to
be faulty. Should you need to return the unassembled product, please repack in the original packaging.
IMPORTANT
• We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step instructions.
• Bed for use by one child aged over 4 years.
• Carefully check that you have all parts before beginning assembly.
• Keep fittings out of children's reach and keep children well away from the construction area.
• We recommend that the packaging is used to protect the surfaces during assembly.
• A minimum of two persons is required to assemble this product.
•Children are likely to play, bounce, jump and climb on beds, therefore the child's bed should not be placed too close to
other furniture or windows, blind cords, curtain pulls or other strings or cords, and should be placed either tight to any
wall or have a gap of 300mm between the wall and the side of the bed.
• WARNING: Be aware of the risk of open fire and other sources of strong heat, such as electric bar fires, etc. in near
vicinity of the bed.
WARNING: Do not place this child's bed near heat sources, windows and other furniture.
WARNING: Do not use this child's bed if any part is broken, torn or missing and use only spare parts approved by the
manufacturer.
• For general cleaning, periodically dust with a soft lint-free cloth or a soft micro fibre cloth please note soft cloths
(including yellow dusters) contain abrasive fibres which can lightly scratch the surface , if in duobt please try your cloth
in an inconspicuous area of the furniture first to assess its suitability.
WARNING: Not suitable for children under 4 years.
PRODUCT INFORMATION
• Made from MDF with a painted finish.
• A mattress measuring 900mm x 1900mm is intended for use with this item.
• Do not rub or scrub the surface when cleaning.
• Made in China.
CARE INSTRUCTIONS
• Any spills should be removed immediately with a soft clean damp cloth and dried immediately.
• Avoid keeping furniture in direct sunlight or close to any heat sources as this can cause cracking, discolouration or
warping.
• Never drag pieces of furniture across the floor as this will cause damage to the joints.
888889 WHITE CABIN BED - BED
Page 1 of 5

1. Insert 2 x wooden dowels (A) into ladder step
panel 7.
2. Attach ladder step 7 to ladder side panel 4
(both L & R) with 4 x bolts (D) and tighten with a
screwdriver.
1. Insert 4 x wooden dowels (A) into head board 1.
2. Insert 2 x barrel nuts (E) into side panel 2 and
side panel 3.
3. Attach head board 1 to side panel 2 and side
panel 3 with 2 x bolts (B), 2 x bolts ( C ) and 4 x
washers (F) using allen key (H) and tighten.
FITTINGS
PARTS
• All assembly fixings should always be tightened properly and periodically check all fixings and tighten if necessary.
STEP ONE
STEP TWO
A
D
Page 2 of 5

1. Insert 4 x wooden dowels (A) to foot board 1.
2. Insert 2 x barrel nuts (E) to side panel 2 and
side panel 3.
3. Attach foot board 1 to side panel 2 and side
panel 3 with 2 x bolts (B), 2 x bolts (C) and 4 x
washers (F) using allen key (H) and tighten.
1. Attach ladder side panel 4 (both L & R ) to side
panel 2 with 2 x bolts (D) and tighten with a
screwdriver.
1. Attach 2 x slats 5 (these must be positioned at
each end of the bed base) and 14 x slats 6 to
assembled unit with 64 x screws (G) and tighten
with a screwdriver.
STEP THREE
STEP FOUR
STEP FIVE
Page 3 of 5

Position as shown
STEP SIX
STEP SEVEN
Page 4 of 5

Next Retail Ltd, Desford Road, Leicester, LE19 4AT
Page 5 of 5