BUNKBED
Assemblyinstructions
BEFORE YOU START
IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.
This child’s bed conforms to BS EN 747:2012
WARNINGS Number of people required to assemble
ou
ne
yc
ec
a
e uppe
sa
e
yra
an
a
e
a
ac
men
s secure
and tighten any fittings using the appropriate tools. Two persons are required to assembled
.
loose because a child can squeeze parts of the body, or clothing (e.g.
strings, necklaces, ribbons for babies, dummies, etc.) could get caught.
There would be danger of strangulation. Time of assemble
.
To avoid risk of serious injury the distance between the top safety barrier
and the wall shall not exceed 75mm or shall be more than 230mm.
WARNING: Do not use this child's bed if any part is broken, torn or
missing. Tools required
WARNING: High beds and the upper bed of bunk beds are not suitable for
children under six years due to risk of injury from falls.
Do not leave items such as ropes, strings, cords, harnesses and belts
attached to or hung to the bunk/high bed due to the risk of strangulation
.
Children are likely to play, bounce, jump and climb on beds, therefore the
child's bed should not be
laced too close to othe
furniture o
windows
and should be placed either tight to any wall or have a gap of 300mm
between the wall and the side of the bed
Missing parts
If you are missing any fixtures and fitting for your products, please
contact our customer service team 0333 777 8999 and they will be
happy to arrange for replacement to be sent to you free of charge.
Do’s How service technicians
When you are ready to start, make sure that you have the right tools and
plenty o
spaceDuetothesizeo
the product we recommend that it is
assembled in the room intended for use. If you have a fault with your product please contact our customer service
Unwrap all packaging materials and place the components on a clean
surface to protect it from damage,
team on 0333 777 8999. If you have had the product for 28 days or less
you may be offered a replacement, refund or for a fully trained home
We recommend that the packaging is used to protect the surfaces during
assembly Carefully check that you have all the parts before beginning
products where possible. If you have a product for more than 28 days we
will send and independent home service technician to review and repair
assem
y.
To clean
ou
item, wipe with a soft cloth sli
htl
dampened with water.
the product where possible and recommend
urther action.
Then buff with a dry clean cloth.
This bed is designed to be used with a mattress with the following
dimensions H17 x W90 x D190cm.
You can write to us at
Please ensure that the mattress depth does not go past the permanent
mark on the post/Upper Safety Barrier.
Please periodically check all fittings and re-tighten as necessary Home customer services
NextRetailLtd,
Desford Road,
Leicester,
Don’t s
LE19 4AT
Do not drag or pull your furniture.
Do not use silicone based furniture polish Silicone in furniture polishes can
Do not stand or
um
on this
roduct
To View our full furniture range please visit www.next.co.uk
.
break down the finish.
ProducedinVietnamforNextRetailLtd.
‐
‐
