Next FINSBURY CABIN STATION 683543 User manual

683543 FINSBURY CABIN STATION
1 of 11
ASSEMBLY INSTRUCTIONS.
IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.
IMPORTANT
• We suggest you spend a short time reading through this leaflet and then follow the simple
step by step instructions.
• Carefully check that you have all parts before beginning assembly.
• Keep fittings out of children's reach and keep children well away from the construction area.
• We recommend that the packaging is used to protect the surfaces during assembly.
• A minimum of 2 persons is required to assemble this product.
• We recommend the use of the wall attachment bracket for safety reasons.
Helpline
If you have any problems with this
product or require any replacement
fittings please contact Customer
Services Tel: [phone]
Regrettably self assembly items cannot be returned once assembly is part or fully completed
unless the item is found to be faulty. Should you need to return the unassembled product,
please repack in the original packaging.
• For general cleaning, periodically dust with a soft cloth.
• Do not rub or scrub the surface when cleaning.
• Always use a non-silicone based furniture polish. Silicone in furniture polishes can break down
the lacquer finish.
• Any spills should be removed immediately with a soft clean damp cloth and dried immediately.
Avoid keeping furniturein direct sunlight or closeto any heat sources as this can cause cracking,
discolouration or warping.
• Never drag pieces of furniture across the floor as this will cause damage to the joints.
All assembly fixings should always be tightened properly and periodically check all fixings and
tighten if necessary.
• The finish will mellow and change colour over time.
CARE INSTRUCTIONS
PRODUCT INFORMATION
Tools Needed
Made in Poland.
P5UBFI 80 Cabinet
OPTION RIGHT
OPTION LEFT

2 PERSON ASSEMBLY
ASSEMBLED DIMENSIONS
APPROXIMATE ASSEMBLY TIME
REQUIRED ASSEMBLY TOOLS
REQUIRED ASSEMBLY SPACE
FLOOR AREA
2.5 M x 2,5 M
1 hrs
DESCRIPTION:
Assembly
Instruction
2 of 11
683543 FINSBURY CABIN STATION
LEFT SIDE LADDER LEFT SIDE LADDER
992 mm
1170 mm
1992 mm
RIGHT SIDE LADDER
P5UBFI 80 Cabinet

PARTS LIST
NO PART LIST QTY
.
DESCRIPTION:
Assembly
Instruction
(1) LEFT SIDE PANEL
(2) FRONT LEFT POST
(3) BACK POST
(4) FRONT RIGHT POST
(5) HORIZONTAL SLAT
(6) BOTTOM PANEL
(7) BACK PANEL
(8) TOP PANEL
(9) FRONT PLINTH
(10) LEFT PLINTH
(11) RIGHT PLINTH
(12) BACK PLINTH
(13) DOORS
3 of 11
1
1
2
1
1
1
1
1
1
1
1
1
2
683543 FINSBURY CABIN STATION
1
2
3
1
4
63
57
8
9
10
11
13
13
12
PACK 1 CONSISTS OF PARTS :
50, 50a, 51, 52, 53, 57, AI, FITTINGS.
PACK 2 CONSISTS OF PARTS :
54, 55, 56, 58, 59, 60, 61.
PACK 4 CONSISTS OF PARTS :
1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13,
AI, FITTINGS.
PACK 5 CONSISTS OF PARTS :
15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25,
26, 27, 28, 29, 30, 31L, 31R, 32,
AI, FITTINGS.
PACK 3 CONSISTS OF PARTS :
33, 34, 35, 36, 37, 38, 39, 40, 41, 42,
43, 44, 45L, 45R, 46, 47, 48, 49, AI, FITTINGS,
P5UBFI 80 Cabinet

HARDWARE LIST
DESCRIPTION:
10 20 30 40 50 60 70 80 90 100 mm
Assembly
Instruction
DO NOT MIX CONTENT OF HARDWARE BOXES
4 of 11
20x
8x28m
DOWEL
B
BAG 1
4x
CAM BOLT
F
BAG 1
A
++
4x
CAM LOCK
BAG 1
HINGE PLATE
E
BAG 2
4x E1
5x39mm
683543 FINSBURY CABIN STATION
C
16x
4x35mm
SCREW
BAG 6
CONFIRMAT
SCREW
G
BAG 1
4x
7x50mm
1x
GLUE
I
BAG 1
J
6x
BRACKET
BAG 3
J1
24x
3,5x13mm
SCREW
BAG 3
8x 2x
2x
6,3x13mm 4,0x30mm
SCREW SCREW
HANDLE
K1 L1
L
BAG 3 BAG 3
BAG 3
4x
HINGE
1:2
K
BAG 3
2x
2x 3,0x13mm
SCREW
CLOTHES BAR
SUPPORT
DD1
BAG 4
BAG 4
CLOTHES BAR
M5
1:2
1x
L=703mm
P5UBFI 80 Cabinet

Top Tips before you start!
1. Please check that all parts are present before you start the assembly of your furniture,
as once assembled, the furniture is exempt from our home approval policy.
2. For ease and speed of assembly, we recommend that before you commence each step
of the assembly, that you identify all the parts required for that step.
3. For larger items, please ensure that you have sufficient space and people (as indicated
on page 1) to assemble your product safely.
4. We recommend that, where possible, all items are assembled near to the area in which
they will be placed in use, to avoid moving the product unnecessarily once assembled.
5. For the protection of your furniture, particularly items of high gloss finish, we recommend
that the product is placed on aprotected surface during assembly to prevent any damage.
6. During assembly please take care not to over-tighten any fittings, as this may damage
the product .
Care and Maintenance of your Furniture
Please periodically check all fittings and re-tighten as necessary.
Please do not jump on your furniture.
To clean your item, please use adamp cloth and wipe clean.
Never allow any kind of liquid to remain on your furniture. Absorption can cause wood to
warp or finishes to de-laminate.
DESCRIPTION:
Assembly
Instruction
5 of 11
683543 FINSBURY CABIN STATION
P5UBFI 80 Cabinet

SCREW IN CAM SCREWS
ONLY DOWN TO FIRST RING.
FLUSH
WITH
PANEL
1
PRESS PANELS TOGETHER ALIGNING
DOWEL WITH HOLES, CAM SCREWS WITH LOCKS.
3
TO SECURE PANELS,
TURN CAM LOCKS 1/2 TURN CLOCKWISE.
4
CAM SHOWN IN
LOCKED POSITION.
++
++
PRESS IN CAM LOCKS. ARROW ON CAM
LOCK MUST FACE HOLE IN PANEL EDGE.
DO NOT INSERT DOWELS
IN CAM SCREW / LOCK HOLES.
2
++
++
DESCRIPTION:
Assembly
Instruction
6 of 11
683543 FINSBURY CABIN STATION
P5UBFI 80 Cabinet

DESCRIPTION:
Assembly
Instruction
7 of 11
1
2
++
++
A
FRONT
1
1
B
B
4x
4x
2x
2x
B
B
A
A
++
++
8x
8x
2x
2x
C
C
E
E
1x
1x
1x
1x
D
D
D1
D1
683543 FINSBURY CABIN STATION
++
++
A
A
A
3
4
3
front
E
2
3
C
FRONT
C
front
E4
2
A
A
B
B
++
++
D
D
D1
D1
P5UBFI 80 Cabinet

3
DESCRIPTION:
Assembly
Instruction
8 of 11
4
4x
G
G
G
B
4x
B4x
F
683543 FINSBURY CABIN STATION
8
5
F
++
++
5
6
2
4
FRONT
FRONT
G
G
P5UBFI 80 Cabinet

DESCRIPTION:
Assembly
Instruction
9 of 11
5
6
++
++
1/2 TURN
CLOCKWISE.
++
683543 FINSBURY CABIN STATION
++
++
8
7
9
10
11
12
J
6x
1x
J1
I
16x
J1
J
J
J1
J
J1
9
9
10
11
8x
B
B
I
P5UBFI 80 Cabinet

DESCRIPTION:
Assembly
Instruction
10of 11
683543 FINSBURY CABIN STATION
7
8
++
++
6
8
6J1
8x
J1 J
J
8x
x2
2x
4x 2x
KL
K1 L1
K1
K
K1
13
L
L1
P5UBFI 80 Cabinet

DESCRIPTION:
Assembly
Instruction
11of 11
683543 FINSBURY CABIN STATION
9
13
13
a)Side adjustment:
Loosen fixing screw “A”,adjust gap with screw “B” and
retighten screw “A”.
b)Depth adjustment:
Loosen fixing screw “A”, push hinge arm forwards or
backwards, re-tighten screw “A” ,fix screw “B” with a 1/4-turn
in clock-wise direction.
c) Height adjustment:
Loosen screw “C”, adjust height, re-tighten screw “C”.
AA
C
b) c)
BC
Hinges Adjustment Facilities
E
K1x
L=703mm
M5
M5
P5UBFI 80 Cabinet