Next HANSON 340602 User manual

Assembly instructions
Need Help?
With: Assembly instructions
Missing or damaged parts
CALL:0333 777 8999
Produced in China for Next Retail Ltd
IMPORTANT - KEEP FOR FUTURE REFERENCE.
MBD 8847
Actual product size
H1010 x W2010x D983 mm
340602
HANSON SINGLE BED

511731
511731
Warnings
Don'ts
BEFORE YOU START
If you are missing any fixtures and fittings for your product
please contact our customer service team on 0333 777 8999
and they will be happy to arrange for a replacement to be sent
to you free of charge.
Home service technicians
If you have a fault with your product please contact our
customer service team on 0333 777 8999. If you have had the
product for 28 days or less you may be offered a replacement,
refund or for a fully trained home service technician to visit your
home to assess the fault and repair the product where possible.
Desford Road,
Leicester,
LE19 4AT,
To view our full furniture range please visit www.next.co.uk
1
We suggest you retain these instructions for future reference.
Keep fittings out of children's reach and keep children well away
from construction area.
Please do not jump or stand on your bed.
Avoid exposing the furniture to excessive heat or direct
sunlight as this can cause deterioration of the colour.
Please periodically check all fittings and re-tighten as necessary.
This product should only be used on firm, level ground.
Number of
p
e
op
le re
qu
ired to assemble
Missing parts
Produced in China for Next Retail Ltd
WARNING:
WARNING:
WARNING:
WARNING:
WARNING:
WARNING:
30 minutes
MBD8847
This bed conforms to BS 8509:2008 + A1:2011
Do not place this child's bed near heat sources,
windows and other furniture.
Do not use this child's bed if any part is broken,
torn or missing.
Assembly by adult only.
All assembly fittings should always be tightened
properly and checked periodically.
Not suitable for children under 4 years.
Once assembled this bed is not designed to be
disassembled and reassembled. Children are likely to play,
bounce, jump and climb on beds, therefore the child's bed should
not be placed too close to other furniture or windows, blind cords,
curtain pulls or other strings or cords and should be placed either
tight to any wall or have a gap of 300mm between the wall and the
side if the bed. The size of the mattress to be used with the child's
bed is 900mm x 1900mm.
Do not drag your assembled bed. Always lift the bed and check
that the centre support rail is securely fixed in place.
Do not use silicone based furniture polish. Silicone in furniture
polishes can break down the lacquer finish.
Apply adhesive substrates of example, sticky tape to the product.
If you have had the product for more than 28 days we will send
an independent home service technician to review and repair
the product where possible and recommend further action.
You can write to us at
Home Customer Services
Next Retail Ltd,
Do's
We suggest you spend a short time reading through this leaflet
before you start.
When you are ready to start, make sure that you have the
right tools, plenty of space.
Unwrap all packaging materials and place the components
on a clean surface to protect them from damage.
We recommend that the packaging is used to protect the
surfaces during assembly.
Carefully check that you have all the parts before beginning
assembly.
Ensure the product is fully assembled as illustrated and all
fixings are fully tightened before use. Check fixings regularly
to ensure they remain tight.
Always ensure that protectors are used on the legs according to
your flooring type.
When adjusting the support legs ensure that the foot is set 10mm
from the floor surface without the mattress in place. When in use
the legs will createthe required support.
To clean your item, please use a soft cloth slightly dampened
with water and wipe clean. Then buff with a dry clean cloth.
HANSON SINGLE BED
Assembly instructions
340602

Visual
Assembly instructions
2
1
2
3
4
5
1
1
2
2
1
Components supplied - Use this guide if you require a replacement part.
（3）
（4）
（4）
（3）
（1）
（5）
（2）
340602
Produced in China for Next Retail Ltd
MBD 8847
1010*983*38
710*983*38
1927*110*45
918*62*9*15 pcs
915*50*25
Ref Dimensions Qty
HANSON SINGLE BED

Assembly instructions
3
10 20 30 40 50 60 70 80 90 100 110
mm
R e f
A
B
C
D
E
Dim e nsio ns
M 6 x 2 0 m m
4 m m
Ø
Ø
6 x 2 5 mm
S p a re
1
1
1
1
Q ty
1 2
1
1 2
8
6
Produced in China for Next Retail Ltd
MBD 8847
6*18
6*18
340602
HANSON SINGLE BED

A x 4 B x
B
A
C
1
m6x20mm 4mm
B x 1
A x 8
D x 8
C x 8
4mm
M6x20mm
Ø
Ø
Assembly instructions
1
2
4
（1）
（2）
（3）
（3）
（4）
（
4
）
C x 4 Ø
Produced in China for Next Retail Ltd
MBD 8847
6*18
6*18
6*18
340602
HANSON SINGLE BED
D
CAB

Assembly instructions
5
E x 66x25mm
3
E
Produced in China for Next Retail Ltd
MBD 8847
(P5)
340602
HANSON SINGLE BED

Assembly instructions
Produced in China for Next Retail Ltd
MBD 8847
Inner size
L1920 x D920 mm
Actual product size
H1010 x W2010x D983 mm
340602
HANSON SINGLE BED
1010 mm
710 mm
2010 mm
250mm
983 mm