Next HARTFORD 673123 User manual

1 hour
Tips
not supplied not supplied
PH2
CORSICA COFFEE TRUNK
896938
Assembly instructions
1
SPECIAL TIPS FOR FITTING CAM-LOCKS
AND CAM-PILLARS
CAM-LOCK
WHEN FITTING CAMS
ENSURE STARTING POSITION CORRECT
BEFORE YOU INSERT CONNECTING CAM-PILLAR
TURN CLOCKWISE UNTIL SECURE
Align with long point of cross
CORRECT WRONG
Pillar head needs to be in centre
CAM-PILLAR
Tighten until shoulder is flush
with panel.Do not overtighten
or undertighten (see example below) Shoulder
NO GAP
Panel
Panel
673123

HARTFORD PAINTED PHONE TABLE
673123
Assembly instruction
Warnings Number of people required to assemble
Time to assemble
This product should only be used on firm level ground.
Please periodically check all fittings and re-tighten as necessary.
Please do not sit or stand on your furniture.
Do's Tools required
Missing parts
Home service technicians
You can write to us at
Home customer services
Produced in China for NEXT Retail Ltd. 1
673123-2014-V1.
We suggest you spend a short time reading through the leaflet before you
start.
Two people are required to assemble this item.
Keep fittings out of children’s reach and keep children well away from
construction area.
BEFORE YOU START
Avoid exposing the furniture to excessive heat or direct sunlight as this can
cause deterioration of the colour.
Unwrap all packaging materials and place the components on top of the
carton box or on a clean floor to protect it from damage.
Unwrap all packaging materials and place the components on a clean
surface to protect it from damage, We recommend that the packaging is
used to protect the surfaces during assembly.
Do not place hot items (e.g. hot drinks) directly on to the wood surface.
Please make sure you use a placemat or coaster.
Ensure the product is fully assembled as illustrated and all fixings fully
tightened before use.
Dont's
Do not drag or pull your furniture.
Do not use silicone based furniture polish. Silicone in furniture polishes
can break down the lacquer finish.
To view our full furniture range please visit www.next.co.uk
Look out for the symbol througout this manual. Wherever you see it we will
have a handy tip to help you with the assembly of your product.
If you are missing any fixtures and fittings for your product, please contact our
customer service team on 0333 777 8999 and they will be happy to arrange for
a replacement to be sent to you free of charge
If you have a fault with your product, please contact our customer service team
on 0333 777 8999. If you have had the product for 28 days or less you may be
offered a replacement,refund or for a fully trained home service technician to
visit your home to assess the fault and repair the product where possible. If you
have had the product for more than 28 days we will send an independant home
service technician to review and repair the product where possible and
recommend further action.
Next Retail Ltd.
Desford Road,
Leicester,
LE 19 4AT
When you are ready to start. Make sure that you have the right tools, plenty
of space and a clean, dry area for assembly.
Carefully check that you have all the parts before beginning assembly.
Due to the size of the product we recommend that it is assembled in the
room intended for use.
1 hour
Tips
not supplied not supplied
PH2
CORSICA COFFEE TRUNK
896938
Assembly instructions
1
SPECIAL TIPS FOR FITTING CAM-LOCKS
AND CAM-PILLARS
CAM-LOCK
WHEN FITTING CAMS
ENSURE STARTING POSITION CORRECT
BEFORE YOU INSERT CONNECTING CAM-PILLAR
TURN CLOCKWISE UNTIL SECURE
Align with long point of cross
CORRECT WRONG
Pillar head needs to be in centre
CAM-PILLAR
Tighten until shoulder is flush
with panel.Do not overtighten
or undertighten (see example below) Shoulder
NO GAP
Panel
Panel

1 hour
Tips
not supplied not supplied
PH2
CORSICA COFFEE TRUNK
896938
Assembly instructions
1
SPECIAL TIPS FOR FITTING CAM-LOCKS
AND CAM-PILLARS
CAM-LOCK
WHEN FITTING CAMS
ENSURE STARTING POSITION CORRECT
BEFORE YOU INSERT CONNECTING CAM-PILLAR
TURN CLOCKWISE UNTIL SECURE
Align with long point of cross
CORRECT WRONG
Pillar head needs to be in centre
CAM-PILLAR
Tighten until shoulder is flush
with panel.Do not overtighten
or undertighten (see example below) Shoulder
NO GAP
Panel
Panel
673123
GETTING TO KNOW YOUR PRODUCT

1 hour
Tips
not supplied not supplied
PH2
CORSICA COFFEE TRUNK
896938
Assembly instructions
1
SPECIAL TIPS FOR FITTING CAM-LOCKS
AND CAM-PILLARS
CAM-LOCK
WHEN FITTING CAMS
ENSURE STARTING POSITION CORRECT
BEFORE YOU INSERT CONNECTING CAM-PILLAR
TURN CLOCKWISE UNTIL SECURE
Align with long point of cross
CORRECT WRONG
Pillar head needs to be in centre
CAM-PILLAR
Tighten until shoulder is flush
with panel.Do not overtighten
or undertighten (see example below) Shoulder
NO GAP
Panel
Panel
673123
GETTING TO KNOW YOUR PRODUCT
673123

1 hour
Tips
not supplied not supplied
PH2
CORSICA COFFEE TRUNK
896938
Assembly instructions
1
SPECIAL TIPS FOR FITTING CAM-LOCKS
AND CAM-PILLARS
CAM-LOCK
WHEN FITTING CAMS
ENSURE STARTING POSITION CORRECT
BEFORE YOU INSERT CONNECTING CAM-PILLAR
TURN CLOCKWISE UNTIL SECURE
Align with long point of cross
CORRECT WRONG
Pillar head needs to be in centre
CAM-PILLAR
Tighten until shoulder is flush
with panel.Do not overtighten
or undertighten (see example below) Shoulder
NO GAP
Panel
Panel

1 hour
Tips
not supplied not supplied
PH2
CORSICA COFFEE TRUNK
896938
Assembly instructions
1
SPECIAL TIPS FOR FITTING CAM-LOCKS
AND CAM-PILLARS
CAM-LOCK
WHEN FITTING CAMS
ENSURE STARTING POSITION CORRECT
BEFORE YOU INSERT CONNECTING CAM-PILLAR
TURN CLOCKWISE UNTIL SECURE
Align with long point of cross
CORRECT WRONG
Pillar head needs to be in centre
CAM-PILLAR
Tighten until shoulder is flush
with panel.Do not overtighten
or undertighten (see example below) Shoulder
NO GAP
Panel
Panel

1 hour
Tips
not supplied not supplied
PH2
CORSICA COFFEE TRUNK
896938
Assembly instructions
1
SPECIAL TIPS FOR FITTING CAM-LOCKS
AND CAM-PILLARS
CAM-LOCK
WHEN FITTING CAMS
ENSURE STARTING POSITION CORRECT
BEFORE YOU INSERT CONNECTING CAM-PILLAR
TURN CLOCKWISE UNTIL SECURE
Align with long point of cross
CORRECT WRONG
Pillar head needs to be in centre
CAM-PILLAR
Tighten until shoulder is flush
with panel.Do not overtighten
or undertighten (see example below) Shoulder
NO GAP
Panel
Panel
9
J ×2
A ×3

1 hour
Tips
not supplied not supplied
PH2
CORSICA COFFEE TRUNK
896938
Assembly instructions
1
SPECIAL TIPS FOR FITTING CAM-LOCKS
AND CAM-PILLARS
CAM-LOCK
WHEN FITTING CAMS
ENSURE STARTING POSITION CORRECT
BEFORE YOU INSERT CONNECTING CAM-PILLAR
TURN CLOCKWISE UNTIL SECURE
Align with long point of cross
CORRECT WRONG
Pillar head needs to be in centre
CAM-PILLAR
Tighten until shoulder is flush
with panel.Do not overtighten
or undertighten (see example below) Shoulder
NO GAP
Panel
Panel
4
62
5
10
9
J ×2
A ×3

1 hour
Tips
not supplied not supplied
PH2
CORSICA COFFEE TRUNK
896938
Assembly instructions
1
SPECIAL TIPS FOR FITTING CAM-LOCKS
AND CAM-PILLARS
CAM-LOCK
WHEN FITTING CAMS
ENSURE STARTING POSITION CORRECT
BEFORE YOU INSERT CONNECTING CAM-PILLAR
TURN CLOCKWISE UNTIL SECURE
Align with long point of cross
CORRECT WRONG
Pillar head needs to be in centre
CAM-PILLAR
Tighten until shoulder is flush
with panel.Do not overtighten
or undertighten (see example below) Shoulder
NO GAP
Panel
Panel
4
62
5
10

1 hour
Tips
not supplied not supplied
PH2
CORSICA COFFEE TRUNK
896938
Assembly instructions
1
SPECIAL TIPS FOR FITTING CAM-LOCKS
AND CAM-PILLARS
CAM-LOCK
WHEN FITTING CAMS
ENSURE STARTING POSITION CORRECT
BEFORE YOU INSERT CONNECTING CAM-PILLAR
TURN CLOCKWISE UNTIL SECURE
Align with long point of cross
CORRECT WRONG
Pillar head needs to be in centre
CAM-PILLAR
Tighten until shoulder is flush
with panel.Do not overtighten
or undertighten (see example below) Shoulder
NO GAP
Panel
Panel

1 hour
Tips
not supplied not supplied
PH2
CORSICA COFFEE TRUNK
896938
Assembly instructions
1
SPECIAL TIPS FOR FITTING CAM-LOCKS
AND CAM-PILLARS
CAM-LOCK
WHEN FITTING CAMS
ENSURE STARTING POSITION CORRECT
BEFORE YOU INSERT CONNECTING CAM-PILLAR
TURN CLOCKWISE UNTIL SECURE
Align with long point of cross
CORRECT WRONG
Pillar head needs to be in centre
CAM-PILLAR
Tighten until shoulder is flush
with panel.Do not overtighten
or undertighten (see example below) Shoulder
NO GAP
Panel
Panel
1.Move the item into position and attach the end of the
strap to the wall with the approciate screw, washer and
wall plug for your wall type .
2.WARNING: Always ensure the area to be drilled is
free from hidden electrical wires, water and gas
pipes.
3.NOTE: Wall fixings are not included , please source suitable
fixings for your wall type, if in doubt, please consult a qualified
tradesman.
673123

1 hour
Tips
not supplied not supplied
PH2
CORSICA COFFEE TRUNK
896938
Assembly instructions
1
SPECIAL TIPS FOR FITTING CAM-LOCKS
AND CAM-PILLARS
CAM-LOCK
WHEN FITTING CAMS
ENSURE STARTING POSITION CORRECT
BEFORE YOU INSERT CONNECTING CAM-PILLAR
TURN CLOCKWISE UNTIL SECURE
Align with long point of cross
CORRECT WRONG
Pillar head needs to be in centre
CAM-PILLAR
Tighten until shoulder is flush
with panel.Do not overtighten
or undertighten (see example below) Shoulder
NO GAP
Panel
Panel
1.Move the item into position and attach the end of the
strap to the wall with the approciate screw, washer and
wall plug for your wall type .
2.WARNING: Always ensure the area to be drilled is
free from hidden electrical wires, water and gas
pipes.
3.NOTE: Wall fixings are not included , please source suitable
fixings for your wall type, if in doubt, please consult a qualified
tradesman.
673123