Next JULIETTE 367794 User manual

Tools Needed
Helpline
If you have any problems with this product or require
any replacement fittings plase contact Customer
Services Tel: [phone]
* Do not place very hot or cold items against or in close proximity to the glass surface unless adequately thick insulation
material is used to prevent such items from coming into contact with glass.
* Care must be taken when cleaning around the product with a vaccum cleaner to prevent damage to the glass panels.
Page 1 of 3
ASSEMBLY INSTRUCTIONS.
Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is found to be
faulty. Should you need to return the unassembled product, please repack in the original packaging.
IMPORTANT
• Clean using a glass cleaner and soft cloth. Do not use cleaning products containing abrasives as these will scratch the
• We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step instructions.
CARE INSTRUCTIONS
IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.
• Carefully check that you have all parts before beginning assembly.
• Keep fittings out of children's reach and keep children well away from the construction area.
PRODUCT INFORMATION
• We recommend that the packaging is used to protect the surfaces during assembly.
• A minimum of 2 persons is required to assemble this product.
• Any spills should be removed immediately with a soft clean damp cloth and dried immediately.
• Made in China.
• Not suitable for use in bathrooms.
• For general cleaning, periodically dust with a soft cloth.
glass.
• Do not rub or scrub the surface when cleaning.
• Ensure the product is protected with mats and coasters when items are placed on the surfaces, to prevent scratching or
damage.
• Do not put hot dishes directly on the surfaces of the item.
* Do not strike the glass with hard or pointed items.
* Do not sit or stand upon horizontal glass surfaces.
• Never drag pieces of furniture across the floor as this will cause damage to the joints.
• All assembly fixings should always be tightened properly and periodically check all fixings and tighten if necessary.
• Avoid keeping furniture in direct sunlight or close to any heat sources as this can cause cracking, discolouration or warping.
367794 JULIETTE BEDSIDE

1. Attach 1 x Handle (E) to the drawer front using 1 x
spacer (H), 1 x rubber washer (G) and 1 x screw (F).
Tighten with a screwdriver.
NOTE: Ensure not to over tighten the screw. DO NOT
use power tools.
3. Repeat for the remaining two drawers.
4. Insert each drawers into the body of the bedside.
FITTINGS
GLASS INFORMATION
* This item contains glass. Please handle with extreme care.
* BS 7449: 1991.
PARTS
* Batch No.: 042013/ Date of Manufacture: 04/2013
STEP ONE
* This product containers 2mm mirrored glass that does not conform to BS6206. If the glass is chipped or broken replace with
glass of the type described. Consult the manufacturer, retailer or agent with regard to obtaining a manufacturing specification
and shape for replacement glass quoting the model number and batch number or date of manufacture.

1. Turn over the bedside, place on a soft flat surface.
We recommend using the packaging materials.
2. Remove the bottom drawer.
3. Attach 4 x Legs (1) to bottom panel of the bedside
chest using 8 x bolts (B), 8 x spring washers (D) and 8
x washers (C). Tighten with Allen key (A).
4. Turn the bedside upright and reinsert the removed
drawer.
1. Use 1 x screw (J) and 1 x washer (K) to secure 1 x
nylon strap (I) to the top panel. Tighten with a
screwdriver.
2. Secure the other end of the strap to the wall with an
appropriate screw and wall plug for your wall type.
WARNING: Always ensure the area to be drilled is free
from hidden electrical wires, water and gas pipes.
NOTE: Wall fixings are not included - please source
suitable fixings for your wall type. If in doubt please
consult a qualified tradesperson.
STEP THREE
Next Retail Ltd, Desford Road, Leicester, LE19 4AT
STEP TWO
Page 3 of 3
Page 2 of 3