Next PRIMROSE 370841 User manual

We’re con dent you’ll love your gorgeous new Next
furniture. However, it’s worth making absolutely certain
before you put it all together.
So, let’s quickly run through these three steps:
TIPS FOR RETURNS
Not completely happy with the product? No problem.
We just need everything back in the original packaging, so follow the steps below
and this will ensure a super-smooth returns process and no delay to your refund.
1. COLOUR
Make sure you’re happy with the colour
No need to unpack everything, just check the first component.
2. PROTECTIVE PACKAGING
If you’re happy, then it’s time to get opening! Start by laying everything out
on the protective packaging – this will prevent anything getting scratched.
3. PARTS PAGE
Finally, double check you have all the pieces by referencing
the parts page of the instructions.
tCheck everything is there (the ‘parts page’
is a handy checklist).
tPop all the loose fittings and fixtures into
the packaging provided or tie them up in a
plastic bag.
tWrap all the big components back
up in the original protective packaging.
tClose up the box and seal it securely
(don’t be afraid to use plenty of tape).
DO DON’T
tLeave anything assembled -
all components should be dismantled
and separately packed.
tPut loose fixtures and fittings straight
into the box.
tThrow it back in the box carelessly –
as it may get damaged.
Then just give us a call on 0333 777 8999 and we’ll sort out a pick up time for you.
BEFORE YOU GET
STARTED...

1
Produced in China for Next Retail Ltd.
370841-2016-V1
Actual product size
H106 x W97 x L197 cm
IMPORTANT - RETAIN FOR FUTURE REFERENCE
PRIMROSE WHT METAL BED SINGLE
370841
Assembly instructions
NEED HELP?
With: Assembly instructions
Missing or damaged parts
CALL: 0333 777 8999

2
Produced in China for Next Retail Ltd.
370841-2016-V1
PRIMROSE WHT METAL BED SINGLE
370841
Assembly instructions
BEFORE YOU START
Number of people required to assemble
Two persons are required to assemble this item.
Time to assemble
Tools required
Missing parts
If you are missing any fixtures and fittings for your
product please contact our customer service team on
0333 777 8999 and they will be happy to arrange for a
replacement to be sent to you free of charge.
Home service technicians
If you have a fault with your product please contact our
customer service team on 0333 777 8999. If you have
had the product for 28 days or less you may be offered a
replacement, refund or for a fully trained home service
technician to visit your home to assess the fault and
repair the product where possible. If you have had the
product for more than 28 days we will send an
independent home service technician to review and
repair the product where possible and recommend
further action.
You can write to us at
Home Customer Services
Next Retail Ltd,
Desford Road,
Leicester,
LE19 4AT
Warnings
We suggest you retain these instructions for future reference.
Keep fittings out of children’s reach and keep children well away
from construction area.
This product should only be used on firm level ground.
Please periodically check all fittings and re-tighten as necessary
Please do not jump or stand on your bed.
Avoid exposing the furniture to excessive heat or direct sunlight
as this can cause damage to the materials and deterioration of
the colour.
Do’s
We suggest you spend a short time reading through this leaflet
before you start.
When you are ready to start, make sure that you have the right
tools and plenty of space.
Due to the size of the product we recommend that it is
assembled in the room intended for use.
Unwrap all packaging materials and place the components on a
clean surface to protect it from damage, we recommend that the
packaging is used to protect the surfaces during assembly.
Carefully check that you have all the parts before beginning
assembly.
Ensure the product is fully assembled as illustrated and all
fixings fully tightened before use. Check fixings regularly to
ensure they remain tight.
When moving your assembled bed, it is best to lift the bed and
never to drag it. Please check that the centre support rail is
securely fixed in place.
When adjusting the support legs ensure that the foot is set
5-10mm from the floor surface without the mattress in place.
When in use the legs will create the required support for the
product.
Never allow any kind of liquid to remain on your furniture.
Absorption can cause materials to warp or finishes to
de-laminate.
Wipe occasionally with a soft cloth dampened with water. Then
buff with a dry clean soft cloth.
Don’ts
Do not drag or pull your furniture
Do not use silicone based furniture polish. Silicone in furniture
polishes can break down the finish
Do not stand or jump on this product
Please note:
Periodically check the condition of your bed slats
to ensure they are in good condition and have not
become loose.
Assembly to be carried out by a competent adult only.
Do not use this item if any components are missing or damaged.
During assembly children should be kept away from the product
due to possible risk of injury.
30 Minutes

3
GETTING TO KNOW YOUR PRODUCT
Components supplied. Please use this guide if you require a replacement parts.
Ref Dimensions Visual Qty Ctn
1 97x106 cm
97x 88 cm
1 1
2 1 1
3 9 x 193 cm 2 2
PRIMROSE WHT METAL BED SINGLE
370841
Assembly instructions
Produced in China for Next Retail Ltd.
370841-2016-V1
Ref Dimensions Visual Qty Ctn
4 2 x 91 cm 2 2
5 1 3
2
3
1
3
4
4
5
91 x 175 cm

4
PRIMROSE WHT METAL BED SINGLE
370841
Assembly instructions
Produced in China for Next Retail Ltd.
370841-2016-V1
Fixtures and fittings supplied (actual size)
Ref Dimensions Qty
A
8 x 30 mm 8
Spare
fitting
B
6 x 19 mm 81
1
C
E
D
17 x 1.5 mm 81
24 x 1.5 mm 81
12.5 x 2 mm 81
Fixtures and fittings supplied (not to scale)
Ref Dimensions Visual Qty
F 4 mm 1
G 5 mm 1
mm 10 20 30 40 50 60 70

5
PRIMROSE WHT METAL BED SINGLE
370841
Assembly instructions
Produced in China for Next Retail Ltd.
370841-2016-V1
1
2
G
B
E
D
C
G
B
E
D
C
3
3
1
1
3
3
2
8 x 30 mm
17 x 1.5 mm
24 x 1.5 mm
D x 4
C x 4
B x 4
Gx 1 5 mm
12.5x 2 mm
E x 4
8 x 30 mm
17 x 1.5 mm
24 x 1.5 mm
D x 4
C x 4
B x 4
Gx 1 5 mm
12.5x 2 mm
E x 4

6
PRIMROSE WHT METAL BED SINGLE
370841
Assembly instructions
Produced in China for Next Retail Ltd.
370841-2016-V1
3
4
A x 4 6 x 19 mm
4 mm
F
A
F
A
F x 1
4
4
5
4
4
A x 4 6 x 19 mm
4 mm
F x 1

Actual product size
H106 x W97 x L197cm
PRIMROSE WHT METAL BED SINGLE
370841
Produced in China for Next Retail Ltd.
370841-2016-V1
106cm
192cm
197cm
97cm
88cm
30cm