Next SLOANE 404160 User manual

We’re confident you’ll love your gorgeous new Next
furniture. However, it’s worth making absolutely certain
before you put it all together.
So, let’s quickly run through these three steps:
TIPS FOR RETURNS
Not completely happy with the product? No problem.
We just need everything back in the original packaging, so follow the steps below
and this will ensure a super-smooth returns process and no delay to your refund.
1. COLOUR
Make sure you’re happy with the colour
No need to unpack everything, just check the first component.
2. PROTECTIVE PACKAGING
If you’re happy, then it’s time to get opening! Start by laying everything out
on the protective packaging – this will prevent anything getting scratched.
3. PARTS PAGE
Finally, double check you have all the pieces by referencing
the parts page of the instructions.
•Check everything is there (the ‘parts page’
is a handy checklist).
•Pop all the loose fittings and fixtures into
the packaging provided or tie them up in a
plastic bag.
•Wrap all the big components back
up in the original protective packaging.
•Close up the box and seal it securely
(don’t be afraid to use plenty of tape).
DO DON’T
•Leave anything assembled -
all components should be dismantled
and separately packed.
•Put loose fixtures and fittings straight
into the box.
•Throw it back in the box carelessly –
as it may get damaged.
Then just give us a call on 0333 777 8999 and we’ll sort out a pick up time for you.
BEFORE YOU GET
STARTED...

404160/177636/503330/300220/317637/380217/386683-2019-V2 1
SLOANE BEDSIDE
404160/177636/503330/300220/317637/380217/386683
Assembly instructions
Need Help?
CALL: 0333 777 8999
With: Assembly instructions
Missing or damaged parts
H64 x W40 x D40.5cm

404160/177636/503330/300220/317637/380217/386683
404160/177636/503330/300220/317637/380217/386683-2019-V2
SLOANE BEDSIDE
2
Assemblyinstructions
For self-assembled products, please periodically check all
fittings and re-tighten as necessary.
For self-assembled products, we recommend that the
packaging is used to protect the surfaces during assembly.
unpacked
The glass used in this product is toughened and complies
with BS EN 12150, BS EN 4875 and BS EN 14749.

404160/177636/503330/300220/317637/380217/386683
404160/177636/503330/300220/317637/380217/386683-2019-V2
SLOANE BEDSIDE
3
1
If your floor is not level, the feet on the unit should be adjusted to prevent it from rocking.
Place the unit in its final position and unscrew any feet that are not in full contact with the floor.
The unit should then be checked for level in left-right and front-back directions with a spirit level and further
adjustments made as required.
NOTE: If the unit is not levelled, the drawers may not function correctly.

404160/177636/503330/300220/317637/380217/386683
404160/177636/503330/300220/317637/380217/386683-2019-V2
SLOANE BEDSIDE
4
2
2
13
To remove drawers: