Crosley CO1002A User manual

C R O S L E Y
F U R N I T U R E
METAL STATIONARY LOVESEAT
CO1002A

C R O S L E Y
F U R N I T U R E
Congratulations! You have purchased a stylish piece of Crosley Furniture. We strive
to provide fine furniture products, built with quality materials. Please carefully follow
the assembly instructions to ensure your furniture is assembled correctly to provide
long lasting enjoyment.
Should you experience any missing or damaged parts, do not return to the store.
Please contact us directly at 800-815-4796.
Care: Use a soft clean cloth that will not scratch the surface when dusting. Use of
furniture polish is not necessary. Should you choose to use polishes, test in an
inconspicuous area first. Use of solvents of any kind may damage your furniture's
finish. To clean, simply use a soft clean cloth moistened with lukewarm water, then
buff with a dry soft clean cloth.
1 of 5

2 of 5
PART LIST
A B C D E
2PCS 2PCS 2PCS 1PC 1PC
F
1PC
HARDWARE LIST
1 2 3 4 5
1/4" X 32MM BOLT
1/4" NUT
HEX WRENCH ALLEN KEY
1/4" X 15 MM BOLT
E6.5 X 6 MM
PLASTIC WASHER
6 7 8 9 10
8 PCS 1 PC 4 PCS
16 PCS
1 PC 1 PC
11
2 PCS
NUT COVER
16 PCS
BOLT COVER
20 PCS
E6.5 X 1.0 MM
PLASTIC WASHER
20 PCS
1/4" X 40MM BOLT 1/4" X 42MM BOLT
6 PCS
12 13
E6.5 X 11 MM
PLASTIC WASHER
1 PC
1/4" X 25MM BOLT
1 PC
Chair Back Chair Seat
Arm
Upper Back Crossbar
Front Crossbar
Lower Back Crossbar

3 of 5
Step 1: Place the chair seat (B) on a solid flat surface. Position the chair back (A) as
shown in (Figure 1) so that the holes in the chair back align with the holes in
the chair seat. Insert 1/4"x15mm bolts (1) through the holes of the chair back
(A) and then through the holes in the chair seat. Add a 1/4" nut (7) to the end
of each bolt. Tighten using hex wrench (12) and Allen Key (13). Do not over
tighten. Cover nuts and bolts with covers (8 & 9).Repeat for remaining three
holes on each back(A).
Figure 1
A
B1
7
Step 2: Join the two backs (A) by attaching them to the Upper Back Crossbar (D) using
two 6.5 x 1.0 washers (6), two 6.5 x 6.0mm plastic washers (10), one
1/4"x 32mm bolt (3) and one 1/4"nut (7) as shown in (Figure 2). Tighten with hex
wrench (12) and Allen Key (13). Do not over tighten. Cover nuts and bolts with
covers (8 & 9).
Figure 2
8
67
9
7
6
6
3
2
6
D
A
B
A
B
9
10
11
10
8
Figure 3
Step 3: Join the two seats (B) by attaching them using two 6.5 x 1.0 washers (6), one
6.5 x 11.0mm plastic washers (11), one 1/4"x 25mm bolt (2) and one 1/4"nut
(7) as shown in (Figure 3). Tighten with hex wrench (12) and Allen Key (13).
Do not over tighten. Cover nuts and bolts with covers (8 & 9).
8
13
9
12
13 12
13 12

4 of 5
Step 4: Attach arm ( C) to seat (B) and back (A) using 1/4"x42mm bolts (5), two
6.5 x 1.0 washers (6), and 1/4" nuts (7) as shown in (Figure 4). Tighten with
hex wrench (12) and Allen Key (13). Do not over tighten. Repeat for
remaining Loveseat arm. Cover nuts and bolts with covers (8 & 9).
B
A
D
C
E
Step 5: Attach Upper Back Crossbar(D) and Lower Back Crossbar (E) to Arm rest (c)
using 1/4"x40mm bolts (4), two 6.5 x 1.0 washers (6) as (Figure 5). Tighten
with Allen Key (13). Do not over tighten. Repeat for remaining Loveseat . arm
Cover nuts and bolts with covers (8 & 9).
B
F
A
D
C
E
Step 6: Attach Front Crossbar(F) to Arm rest ( C ) using one 1/4"x42mm bolts (5), two
6.5 x 1.0 washers (6) and one 1/4" nut (7) as (Figure 6). Tighten with hex
wrench (12) and Allen Key (13). Do not over tighten. Repeat for remaining
Loveseat arm. Cover nuts and bolts with covers (8 & 9).
Figure 5 Figure 6
B
A
D
C
Figure 4
8
5
6
13
6
7
9
12
6
7
9
12
8
5
6
13
8
4
613
8
4
613
8
4
613
679
12
856
13