The Light Emitting Diodes (LEDs) can last over 50,000 hours and seldom need
replacing. If the LED should malfunction, please contact NightSearcher Limited or
an authorised distributor.
NOTE: Fully charge before using your NightSearcher Power-Star ★for the first time.
It is important to connect the charger as described below
•Using the supplied USB charging cable select the mini USB connector and
insert it into the input socket (1)
•Plug the USB plug into any USB output socket
•When charging voltage is detected the battery status indicators will
illuminate to show charge status
•The NightSearcher Power-Star ★will take between 7 and 9 hours to fully
recharge from flat.
•When fully charged all status LEDs will illuminate steady
•Using the supplied USB cable, connect to the USB output socket (4) on the
base of the unit
TO CHARGE YOUR MOBILE DEVICE
TO CHARGE THE NIGHTSEARCHER POWERSTAR ★
LED ASSEMBLY REPLACEMENT
•Connect the other end of the lead to your mobile device ensuring to select
the correct connector
•Your device will indicate charging; the battery status indicators on the
NightSearcher Power-Star ★will light up one by one to show battery
capacity
•Press power switch (2), the LED indicator(s) turn(s) on to show the battery
capacity
•The LED indicator(s) turn(s) off after 10 seconds
•Press and turn on power switch (2), then press the torch on/off switch (3) to
turn on the LED light.
•Multimode switch cycles between: standard brightness →high brightness →
emergency blinking light →SOS distress signal light →power off
•To assure product SAFETY and RELIABILITY, all repairs, maintenance and
adjustment should be performed by NightSearcher Ltd or an authorised
Distributor.
•Make sure the torch is completely dry before use
•When the unit is excessively discharged, or the connected device is not
stable, its protection circuit will automatically de-activate the unit
•To re-activate the unit, unplug the connected device and short charge the
unit
•Do not allow children to play with the torch
•Do not shine directly into eyes
•Do not expose the battery to fire/high temperatures or extreme wet/cold
conditions
•Do not try to repair the unit or adaptor yourself.Please contact
NightSearcher Ltd or an authorised Distributor
•Do not use excessive force on the product as this may cause permanent
damage to the unit
•Always keep the unit fully charged when not in use
•It is important to recharge the unit as soon as possible after each usage
•The Li-ion rechargeable battery in this unit must be recycled or disposed of
properly
SAFETY PRECAUTIONS
MAINTENANCE
TO USE THE TORCH
BATTERY LEVEL INDICATOR
R68-A024040000-40-00