Nikon AF-S DX NIKKOR 35mm f/1.8G User manual

Nikon
1~m~Bjj~ P.2
User's Manual P. 10
Benutzerhandbuch S. 16
Manuel d1utilisation P. 22
Manual del usuario P. 28
Anvandarhandbok S. 34
NIKKOR
AF-S OX NIKKOR 35mm f/1.8G
PykOBOACTBO nOllb30Barellfl CTP. 40
Gebruikshandleiding P. 46
Manuale d1uso P. 52
F
~
Jp
En
De
Fr
Es
Se
Ru
NI
It
Ck
Ch
Kr

II
10
Notes on Safety Operations
Lt.CAUTION
Do not disassemble
Touching the internal parts of the camera or lens could
result in injury. Repairs should be performed only by
qualified technicians. Should the camera or lens break
open as the result of a fall or other accident, take the
product to aNikon-authorized
service representative for
inspection after unplugging the product and/or removing
the battery.
Turn off immediately in the event of malfunction
Should you notice smoke or an unusual smell coming from
the
camera or lens, remove the battery immediately, taking
care to avoid burns. Continued operation could result in
injury.
After removing
or disconnecting the power source, take
the product to aNikon-authorized service representative
for inspection.
Do not use the camera or lens in the presence of
flammable
gas
Operating electronic equipment in the presence of
flammable
gas could result in an explosion or fire.
Do not look at the sun through the lens or viewfinder
Viewing the sun or other strong light sources through the
lens or viewfinder could cause permanent visual
impairment.
Keep out of reach of children
Particular care should be taken to prevent infants from
putting the batteries or other
small parts into their mouths.
Observe the following precautions when handling
the camera and lens
• Keep the camera and lens unit dry. Failure to do so could
result
in fire or electric shock.
• Do not handle or touch the camera or lens unit with wet
hands. Failure to do so could result in electric shock.
• When shooting with back-lighting, do not point the lens
at the sun or allow sunlight to pass directlydown the lens
as this may cause the camera to overheat and possibly
cause a fire.
• When the lens will not be used for an extended period of
time, attach both front
and rear lens caps and store the
lens away from direct sunlight. Failure to do so could
result
in a fire, as the lens may focus sunlight onto a
flammable object.

•Nomenclature
®
A
D
CD Lens hood (P. 13)
@Lens hood setting index (P. 13)
oLens hood attachment index (P. 13)
@Lens hood mounting index (P. 13)
®Focus ring (P. 13)
® Mounting index (P. 12)
(j) Lens mount rubber gasket (P. 14)
® CPU contacts (P. 14)
®Focus mode switch (P. 13)
(
): reference page
11

Thank you for purchasing the AF-S OX NIKKOR 35mm fll.8G lens. OX Nikkor lenses are specially designed for use
with Nikon digital-SLR (Nikon OX-format) cameras, such as the 0300 and 090. When mounted on Nikon OX-format
cameras, the lens picture angle
is equivalent to approximately l.5x the focal length in 35mm format. Before using
this lens, please read these instructions and refer
to your camera's User's Manual.
12
• Major features
•This lens employs aSilent Wave Motor to drive the
focusing mechanism, making autofocusing smooth,
silent and almost instantaneous. The focus
mode
switch ® is provided for simple selection of
autofocus (A) or manual focus (M) operation.
•More accurate exposure control is possible when this
is mounted on aNikon camera with 3D color matrix
metering capability, because subject distance
information
is transferred from the lens to the camera.
•Superior optical performance and rendering
characteristics are maximized
with the use of one
asphericallens element.
In addition, soft and pleasing
blur characteristics in portions
of pictures that are
out-of focus are achieved by the rounded diaphragm.
•Up
to two Wireless Remote Speedlight SB-R200s can
be
mounted on the edge of the lens.
•Using the lens
Mounting the lens on the camera
IT] Turn the camera off.
[I] Remove the rear lens cap. (Fig. D)
[}] Align the mounting index ® on the lens with the
mounting index on the camera, and rotate the lens
counterclockwise until it clicks into place. Be sure
that the lens is in the correct position when the
mounting
index ® is on the top of the lens.
[I] Remove the front lens cap. (Fig. C)
Removing the lens from the camera
IT] Turn the camera off.
[I] Press and hold the lens release button on the
camera while turning the lens clockwise.

• Using the lens hood
Attaching the hood
Align the lens hood attachment index (., either of
two indexes) @on the hood with the lens hood
mounting index (1) on the lens, and turn the hood
counterclockwise (as viewed when holding the camera
with the lens facing away from you) until it clicks into
place (Fig. B).
• Be sure that the lens hood mounting index is aligned
with the lens hood setting index (-0) @.
•If the lens hood is not correctly attached, vignetting
may occur.
•To facilitate attachmentor removal
of the hood, hold
it by the base (near the lens hood attachment index)
rather than its outeredge.
•To store
the lens hood, attach it in the reverse
position.
Detaching the hood
Hold the lens hood by the base (near the lens hood
attachment index) and turn clockwise, as viewed when
holding the camera with the lens facing awayfrom you,
to detach.
• Focusing (Fig. A)
Set yourcamera's focus mode selectoraccording to the
chart below:
Camera focus
Lens' focus mode switch
mode
MIA M
AF (NS/C) Autofocus with Manual focus
(Focus
manual override assist is available.)
MF
Manual focus (Focus assist is available.)
For more information on camera focus modes, refer to
your camera's User's Manual.
Autofocus with manual override (MIA
mode)
OJ Set the lens focus mode switch ® to MIA.
W Autofocus is enabled, but autofocus operation can
be overridden by rotating the separate focus ring
® while pressing the shutter-release button
halfway, or by pressing the AF-ON button on the
camera body of cameras so equipped.
[l] Press the shutter-release button halfway or the AF-
ON button once again to cancel manual focus and
resume autofocus.
II
73