Nilfisk-Advance Liberty SC60 User manual

Recording a new cleaning plan
1Place the key on the machine
and turn it on
2Insert the passcode on the
touchscreen (1337)
3Position the right side of the machine
close to the Home marker (61 cm)
Nilsk Liberty SC60
4Select teach and follow instructions
on the touchscreen
5SC60 Home marker scanning 6Select the slot where you want you
cleaning plan to be saved
9If nished, just follow the steps and save the plan
LOCATION TAG
7Before starting recording the plan press the One touch™
and adjust the cleaning setting
8You can pause the recording by simply releasing the drive pedal

Daily use – replaying a cleaning plan
Daily maintenance
Nilsk Liberty SC60
1Place the key on the machine and turn
it on
2Insert the passcode on the
touchscreen (1337)
3Position the right side of the machine
close to the Home marker (61 cm)
4Select Clean and follow
the instructions on the
touchscreen
5SC60 Home marker
scanning
6Select and decide the order
of cleaning plans that you
want to run, they will run
consequently
7Follow the instructions on
the touchscreen to secure
the unit and start the
cleaning plan
4Empty the dirty-water tank with a
hose, and gently rinse the tank
5Clean the squeegee if needed 6Charge the machine for 8 -10 hours
1Open the cap and Fill the machine
with cold water
2Fill the detergent tank 3Wipe all sensors with a clean
microber cloth
3786 12/2021