Ningbo SA330 User manual

•
Output power:5V/1A
Glass Wireless Charger
Instruction Manual
SA330
1. Wireless Charging Pad
2. Power Indicator
3. Charging Input Port
4. Wire less Charging Ind i
cator
What's included:
1 xWireless Charging Pad
1xUSB toMicro-USBcharging
cable
1 x lnstruction Manual
Tech Specifications
• Input power:DC 5V/2A
•
Product size:56.6 X H 9.5
• 60cm standrd black color Micro-USB cable
Instructions:
1. Use a certifed USB adapter, connect the
a. provided Micro-USB cable to the USB
adapter.
b. Use Micro-USB tip to connect to the input
port on the charging pad.
2.Cha,glng mobile devices:
a. Check you, phone o, tablet suppo,tlng
with wireless charging, it will be listed in the
manufacturer's specifications.
b. Simply place the enabled device atop the
wl,eless cha,glng pad. You, device should
show the cha,glng Indication.
C. When completely charged, remove the device
from the charging pad.
*Note: In order to charge devices, use only the
Note: In order to charge devices, use only the own
device by the manufacturer.
SAFETY PRECAUTIONS:
1. WARNING When using this product, bas,c
precautions should always be followed,
including the following:
2. Read all the Instructions before using the
product.
3. To reduce the riskof Injury, close supervis,on
isnecessarywhenthe productisusednear
children.
4. Donot expose the device to moisture
5. Do not use the device in excess ofits output
rating.Overload outputs above rating may
「esult In a risk of fire or injury
6. Do not use the device if damaged or modified
7. Damagedormodifiedbatteriesmayexh心t
unp「edlctable behaviorresultingin fire,
explosion or risk of Injury.
a. Do not d;sassemble the devke. Take ;t to a
quanfied serv;ce person when serv;ce or repa,r
;s requ;red. Incorrect reassembly may result ;n
a risk of fire or injury
9. Do not e,pose the device to fire or excessive
temperature.E,posure to fire or temperatures
above 212吓may cause e,plosion.
1o.Haveservicingperformedbyaqualifiedrepair
person using only identical replacementparts.
11.
This will ensure that the safety of theproduct
is maintained
12. DonotoverchargePhone.Unitmaygethotwith
excessiveuse.RemovePhonewhenitisfully
charged. Nevercharge for more than 7 hours at a
time
Wireless Charging Enabled Devices:
iPhone 8/8Plus/X, Samsung Galaxy
S8/S8+/S7/S7 Edge/S6/S6 Edge, Nokia
Lumia 1020/920/928, HTC 8X, HTC Droid
DNA, HTC Rzound, HTC Incredibly
4G LTE, Moto Droid Turbo, Motorola Moto
360 Smart Watch, Moto Droid Maxx, Droid
Mini, Google Nexus 6/4/5/7 (2013)。LG D1L,
LG LTE2,
LG G2 (Verizon), Blackberry Z30 (Verizon)
Warning:
(1) Changes or modifications not e,pressly
approvedby the party responsible for
(2) compliance couldvoid the user'sauthorityto
operate the equipment
3

NOTE: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to
part 15 of the FCC Rules. These limits are
designed to provide reasonable protection
against harmful interference in a
residential installation. This equipment
generates uses and can radiate radio
frequency energy and, if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation.
If this equipment does cause harmful
interference to radio or television reception,
which can be determined by turning the
equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.-
Increase the separation between the equipment
and receiver.-Connect the equipment into an
outlet
on a circuit different from that to which the receiver
is connected.
-Consult the dealer or an experienced radio/TV
technician for helpChanges or modifications not
expressly approved by the party responsible for
compliance could void the user's authority to
operate the equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and
(2) this device must accept any interference
received, including interference that may cause
undesired operation.
RF Exposure Warning Statements:
This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled
environment. This equipment shall be installed and
operated with minimum distance 20cm between the
radiator & body.
FCC ID:2AJZYSA330
Made in China