Ninja BL660Q series User manual

www.ninjakitchen.com
1 877 646-5288
BL660Q Series
OWNER’S GUIDE
Professional Blender
®

11-877-646-5288
IMPORTANT SAFETY INSTRUCTIONS
For Household Use Only
WHEN USING ELECTRICAL APPLIANCES,
BASIC SAFETY PRECAUTIONS SHOULD
ALWAYS BE FOLLOWED, INCLUDING THE
FOLLOWING:
READ ALL INSTRUCTIONS BEFORE USING
YOUR NINJA®PROFESSIONAL BLENDER.
POLARIZED PLUG
WARNING: To reduce the risk of
electric shock, this appliance has a
polarized plug (one blade is wider than the
other). This plug will fit into a polarized
outlet only one way. If the plug does not fit
fully into the outlet, reverse the plug. If it
still does not fit, contact a qualified
electrician to install the proper outlet. DO
NOT modify the plug in any way.
WARNING: Extension cords are
not recommended for use with this product.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK OR INJURY:
1CAUTION: Blade assemblies are
sharp, not locked in place and
removable, handle with care. When
handling the blade assemblies, always
hold them by the shaft.
2CAUTION: Blade Assemblies are not
locked in place and are removable. If
using the pour spout, ensure the lid is
fully locked onto the pitcher. If pouring
with the lid removed, ALWAYS remove
the blade assembly first.
3 CAUTION: Do not blend hot liquids.
4 CAUTION: We do not recommend
grinding in any of our Nutri Ninja®Cups.
5To protect against electrical shock, do not
submerge the appliance or allow the power
cord to come into contact with water or any
other liquid.
6 DO NOT allow children to operate the
appliance or use as a toy. Close supervision
is necessary when any appliance is used
near children.
7Never leave an appliance unattended when
inuse.
8Appliance accessories are not intended to
be used in the microwave as it may result in
damage to the accessories.
9Turn the appliance Off and remove the power
cord from the electrical outlet when not in
use, before assembling or disassembling
parts and before cleaning. To unplug, grasp
the plug and pull from the electrical outlet.
Never pull from the power cord.

2
www.ninjakitchen.com
21 DO NOT remove the container from the
motor base while the appliance is in
operation.
22 To reduce the risk of injury, NEVER operate
the appliance without the lid in place; DO
NOT try to defeat the interlock mechanism;
make sure that the attachment is properly
installed before operating the appliance.
23 DO NOT expose containers to extreme
temperature changes.
24 DO NOT overfill.
25 DO NOT operate the appliance empty.
26 If the appliance overheats, a thermal switch
will become activated and shut off the motor.
To reset, unplug the appliance and let it cool
down for approximately 15 minutes before
using again.
27 In the event that the unit overloads, the unit
will shut down. Unplug the unit and wait 15
minutes to reset.
28 THIS PRODUCT IS INTENDED FOR
HOUSEHOLD USE ONLY. Do not use this
appliance for anything other than its intended
use. Do not use outdoors.
29 The maximum rating is based on the Stacked
Blade Assembly (pitcher) that drives the
greatest power and other recommended
attachments may draw significantly less
power or current.
SAVE THESE
INSTRUCTIONS
10 DO NOT abuse the power cord. Never carry
the appliance by the power cord or yank it
to disconnect from electrical outlet; instead
grasp the plug and pull to disconnect.
11 DO NOT operate any appliance with a
damaged cord or plug, or after the appliance
malfunctions, has been dropped or damaged
in any manner. This appliance has no
serviceable parts. Return the appliance to
SharkNinja Operating LLC for examination,
repair or adjustment.
12 DO NOT let the power cord hang over
the edge of table or counter or touch hot
surfaces such as the stove.
13 Always use appliance on a dry, level surface.
14 Keep hands, hair, clothing, as well as
utensils out of container while processing to
reduce the risk of severe injury to persons
or damage to the appliance. A scraper may
be used but only when the appliance is not
running.
15 Avoid contact with moving parts.
16 DO NOT attempt to sharpen blades.
17 DO NOT use the appliance if blade assembly
is bent or damaged.
18 To reduce risk of injury, never place the blade
assembly on base without pitcher or bowl
properly attached.
19 DO NOT operate this appliance on or near
any hot surfaces (such as gas or electric
burner or in a heated oven).
20 The use of attachments or accessories
including canning jars, not recommended by
the manufacturer may result in fire, electric
shock or personal injury.

31-877-646-5288
THIS BOOK COVERS MODEL NUMBER:
BL660QPL 30
BL660QCN 30
TECHNICAL SPECIFICATIONS
Voltage: 120V., 60Hz.
Power: 1100 Watts
Pitcher Capacity: 72 oz. (9 cups, 2.15 L)
MAX Liquid Capacity: 64 oz. (8 cups, 1.9 L)
Nutri Ninja®Cup Capacity: 16 oz. (2 cups, 470 ml)

4
www.ninjakitchen.com
Contents
Getting to Know Your Ninja®Professional Blender ................................................................ 5
Assembling the Ninja®Professional Blender ......................................................................... 7
Assembly and Use of the Nutri Ninja®Cup ........................................................................... 8
Assembly and Use of the Pitcher.......................................................................................... 9
Care & Maintenance ........................................................................................................ 11
Speed Chart .................................................................................................................... 12
Troubleshooting Guide....................................................................................................... 12
Replacement Parts............................................................................................................ 12
Warranty & Registration..................................................................................................... 14
Thank you for
purchasing
the Ninja®
Professional
Blender.

51-877-646-5288
e Pitcher Lid with Locking Handle
fStacked Blade Assembly
gMotor Base
h Power Cord (not shown)
aNutri Ninja®Cup (x2)
bTo-Go Lids (x2)
cNutri Ninja®Blade Assembly
dPitcher
a
b
d
e
g
f
c
Getting To Know Your Ninja®Professional Blender

6
www.ninjakitchen.com
The Ninja®Professional Blender is a high powered innovative tool with a compact design and outstanding performance.
It is perfect for ice crushing, chopping, blending, and Nutrient and Vitamin Extraction*.
FEATURES:
• Ninja®Blade Technology
• 72oz.Pitcher(MAXLiquidCapacity:64oz.)-BPAFree
• NutriNinja®Cups-BPAFree
• CordStorage
• Lock-OnLid,FeaturingPourSpout
• Easy-to-CleanElectronicControlPanel
* Extract a nutritious drink containing vitamins and nutrients from fruits and vegetables

71-877-646-5288
Assembling the Ninja®Professional Blender
CAUTION: Stacked Blade Assembly is sharp, not
locked in place and removable, handle with care.
When handling the Stacked Blade Assembly,
always hold it by the shaft.
BEFORE FIRST USE
1Remove all packaging material and labels from the appliance.
2Wash the lids, pitcher, Nutri Ninja®cups and blade
assemblies in warm, soapy water with a soft cloth.
CAUTION: Handle the blade assemblies with care
when washing, as the blades are very sharp.
3Rinse and dry thoroughly.
4The pitcher, Nutri Ninja®cups, lids and blade
assemblies are all dishwasher safe. It is recommended
that the lids and blade assemblies be placed on the top
rack. Ensure that the blade assemblies are removed
from the containers before placing in the dishwasher.
5Wipe the motor base clean with a damp cloth.
PLEASE KEEP THESE IMPORTANT
SAFEGUARDS IN MIND WHEN USING THE
APPLIANCE:
WARNING: Never leave the appliance
unattended while in use.
CAUTION: Blade assemblies are sharp, not
locked in place and removable, handle with
care. When handling the blade assemblies,
always hold them by the shaft.
CAUTION: Do not blend hot liquids.
CAUTION: Never remove the container while
the appliance is still running.
CAUTION: We do not recommend grinding in
any of our Nutri Ninja®Cups.
IMPORTANT: Never add ingredients into the
container before placing the blade assembly in
first.
IMPORTANT: Blade assemblies are not
interchangeable.
IMPORTANT: DO NOT attempt to operate the
appliance without the lid on.
IMPORTANT: Never run the appliance empty.
IMPORTANT: Appliance accessories are not
intended to be used in the microwave as it
may result in damage to the accessories.
CAUTION: Stacked
Blade Assembly is
not locked in place
and is removable. If
using the pour spout,
ensure the lid is
fully locked onto the
blender pitcher.
CAUTION:
Stacked Blade
Assembly is not
locked in place and
is removable. If
pouring with the lid
removed, ALWAYS
remove the Stacked
Blade Assembly
first.

8
www.ninjakitchen.com
Use of the Nutri Ninja®Cup
6When you have reached your desired consistency, stop the
appliance by removing your hand from the Single Serve
button. To remove the Nutri Ninja®cup turn it counter-
clockwise (Fig. 4) and pull straight up to remove. (Fig. 5)
NOTE: Do not overfill! To avoid spilling, do not add
ingredients past the “Max” fill line.
NOTE: Do not blend ice cubes without adding a liquid
or the product may overheat.
7Turn the cup upright and remove the Nutri Ninja®Blade
Assembly by twisting the blade assembly to the left.
8Place the To-Go lid onto the Nutri Ninja®cup, twist to
seal and enjoy!
9Make sure that the motor base is unplugged when not
in use.
Forbestresults,useshort“PULSES”... Practice makes perfect!!
Fig. 1
1Place the motor base on a clean, dry, level surface such
as a counter or table top.
2Add ingredients to the Nutri Ninja®cup.
3Place the Nutri Ninja®Blade Assembly onto the cup and
screw it tightly until you have a good seal. (Fig. 1)
4Turn the Nutri Ninja®cup upside down and place it
onto the motor base, aligning the tabs on the cup with
the motor base. Turn the Nutri Ninja®cup clockwise to
lock into place. You will hear a click when the lock is
engaged. (Fig. 2)
5Press down on the Single Serve button in short
intervals to activate. (Fig. 3)
Fig. 2 Fig. 3 Fig. 4 Fig. 5
WARNING: Never leave the appliance unattended while in use.
WARNING: Remove utensils prior to processing.
CAUTION: Handle the Nutri Ninja®Blade Assembly with care, as the blades are very sharp.
CAUTION: Do not blend hot liquids.
IMPORTANT: Make sure that the motor base is plugged in for use
ASSEMBLY USE REMOVAL

91-877-646-5288
1Place the motor base on a clean, dry, level surface such
as a counter or table top.
2Align and lower the Pitcher onto the motor
base. (Fig. 1) Handle should be aligned slightly to the
right of the “LOCK” symbol on the motor base.
3Rotate the blender pitcher clockwise until it clicks in
place. As the pitcher rotates, it will lower and the safety
tabs on the bottom of the pitcher will slide under the
safety tabs on the top of the motor base. (Fig. 2)
4The pitcher can be placed on the motor base two ways;
the handle can be on the front right corner or the front
left corner. (Fig. 3a, Fig. 3b)
5Holding the Stacked Blade Assembly by the top of the
shaft, place it onto the drive gear inside the container.
Ensure that the Stacked Blade Assembly is seated
properly and is standing upright. (Fig. 4)
NOTE: The blade will fit loosely on the drive gear.
6Add the ingredients to the pitcher, making sure that
they do not exceed the highest measured marking line
on the side of the pitcher.
NOTE: If you need to add additional ingredients while
the appliance is processing, open the pour spout and
pour ingredients in through the opening..
NOTE: When blending any kind of liquids, such as
mixtures of any drinks or smoothies, do not exceed the
“Max liquid” mark (64 oz.) on the pitcher
7Plug the power cord into the electrical outlet and press
the power button ( ).
IMPORTANT: As a safety feature, the power
button ( ) will flash and the motor will not work
if the container and lid are not installed correctly.
When the container and lid are installed properly,
the power button ( ) will be solid, indicating that
the appliance is ready for use.
8Holding the lid by the handle in the upright
position, place it on top of the pitcher aligning the
arrow ( ) located on the lid with the arrow ( ) located
on the bowl’s handle. (Fig. 5)
Assembly and Use for the Pitcher
ASSEMBLY
It’s best to add the liquid ingredients first and then the dry ingredients.
Fig. 4
Fig. 3a
Fig. 5Fig. 3b
OR
Fig. 2Fig. 1
WARNING: Never leave the appliance unattended while in use.
WARNING: Remove utensils prior to processing.
CAUTION: Handle the Stacked Blade Assembly with care, as the blades are very sharp.
CAUTION: Do not blend hot liquids.
IMPORTANT: Make sure that the motor base is plugged in for use.

10
www.ninjakitchen.com
USE REMOVAL
12 Depending on the consistency of the contents in the
container, open the pour spout and use the spout
toemptyliquidcontents.Forthickerconsistencies,
remove the lid and Stacked Blade Assembly carefully
(by its shaft), then empty contents from the container.
CAUTION: Stacked Blade Assembly is not locked
in place and is removable. If using the pour spout,
ensure the lid is fully locked onto the blender pitcher.
13 Forthickerconsistencies,removethelidandStacked
Blade Assembly carefully (by its shaft), then empty
contents from the container. To remove the lid, press
the release button on the lid and pull the lid handle up
to a 90°angle and lift the lid off the blender pitcher.
CAUTION: Stacked Blade Assembly is not locked
in place and is removable. If pouring with the
lid removed, ALWAYS remove the Stacked Blade
Assembly first.
14 Make sure that the unit is unplugged when not in use.
9Select the speed that best suits your needs. (Fig. 6)
NOTE: Pulse ingredients for even chopping by pressing
down in short intervals.
10 When you have reached your desired consistency, stop
the appliance by pressing the power button ( ) and
wait for the Stacked Blade Assembly to stop turning.
(Fig. 7)
11 To remove the lid, pull the lid handle up to a 90° angle.
Turn the blender pitcher counter-clockwsie to lift off the
base. (Fig. 7, Fig. 8)
CAUTION: Never insert your hands in the pitcher
as the Stacked Blade Assembly is sharp. Always
use a spatula to dislodge food that has stuck to
the sides of thepitcher.
Fig. 6 Fig. 7 Fig. 8

11 1-877-646-5288
HOW TO STORE
1Store the Ninja®Professional Blender upright with the
pitcher on the motor base, Stacked Blade Assembly
inside the pitcher and lid on the pitcher. Do not place
anything on top. Store the Nutri Ninja®cups and the
rest of the attachments along side the appliance or in
a cabinet where they will not be damaged and won’t
cause a hazard. Insert the power cord into the cord
storage area located in the back of he motor base.
Cord Storage
RESETTING THE MOTOR THERMOSTAT
The Ninja®Professional Blender features a unique safety
system which prevents damage to the unit’s motor and drive
system should you inadvertently overload your appliance.
If the appliance is being overloaded, the motor will
stop. Allow the appliance to cool for approximately
15 minutes. To reset the appliance, follow the resetting
procedure below:
1 Unplug the appliance from the electrical outlet.
2Remove and empty the container and ensure that no
food is jamming the blade assembly.
3Allow the appliance to cool for approximately 15
minutes.
4Re-install the container onto the base and re-plug the
appliance into the electrical outlet.
5Proceed to use the appliance as before making sure not
to exceed the recommended maximum capacities.
HOW TO CLEAN
CAUTION: Make sure that the motor base is
unplugged from the power source before inserting
or removing any blade assembly and before
cleaning.
CAUTION: DO NOT immerse the motor base into
water or any other liquid.
CAUTION: Handle the blade assemblies with care,
as the blades are very sharp.
1Separate/remove all parts from each other.
2Clean the motor base with a damp cloth and wipe dry.
3Place the pitcher and Nutri Ninja®cup in the dishwasher.
Place the lids and blade assemblies on the top rack.
OR
4Carefully hand wash the lids, pitcher, Nutri Ninja
®
cups and
blade assemblies in warm, soapy water with a soft cloth.
Please call customer service if any servicing needs to
be performed on the appliance at 1-877-646-5288.
Care & Maintenance

12
www.ninjakitchen.com
BUTTON FUNCTION USE
POWER On/Off Always turn appliance 'Off' when not in use.
1Processing &
Mixing
Use to mix thin batters, gravies and marinades, scramble eggs, and uncooked
fruits and chop vegetables for dips and salsa.
2Blending Use to grate hard cheeses, beat dips, thorough chopping, blend sauces*
and spreads. Blend mixed drinks, powdered drinks or milk shakes.
3
Pureeing,
Liquefying & Ice
Crushing
Use to mix smoothies, frappes, liquefy thick mixtures and blend whole
fruits and vegetables. Crush ice cubes for snow cones, chilled beverages or
frozen slushes
PULSE
Controlled
Processing &
Bursts of Power
Use to control chopping and processing.
Speed Chart
PROBLEMS POSSIBLE REASONS & SOLUTIONS
Control Panel Lights Are
Blinking, Motor Doesn’t
Start or Blade Assembly
Doesn’t Rotate.
Make sure the pitcher is securely placed on motor base.
Make sure the lid is securely on pitcher in the correct position (align arrows).
The blender is turned 'Off'. Press the power button ( ) to turn 'On'.
Check that the plug is securely inserted into the electrical outlet.
Check the fuse or circuit breaker.
The unit has overheated. Unplug and wait approximately 15 minutes before using again.
Food is Unevenly Chopped.
Either you are chopping too much food at one time, you are chopping food with different
textures or the pieces are not of even size. Process smaller amounts per batch.
Food is Chopped Too Fine or
is Too Watery. The food has been over processed. Use pulse button for controlled processing.
Food Collects on the Lid or
on the Sides of the Pitcher. The mixture is too thick. Add more liquid.
You Cannot Achieve Snow
From Solid Ice.
Do not use ice that has been sitting out or has started to melt. Use ice straight from
the freezer.
Troubleshooting Guide
To order additional parts and accessories, please visit our website: www.ninjakitchen.com
or feel free to contact customer service: 1-877-646-5288.
Replacement Parts
IMPORTANT: Do not run the appliance over 4 minutes at a time to prevent overheating of the appliance
*When blending sauces, make sure they’re cooled to room temperature first - Ninja containers are not intended for hot blending .

13 1-877-646-5288
Notes

14
www.ninjakitchen.com
PRODUCT REGISTRATION
Please visit www.ninjakitchen.com or call 1-877-646-5288 to register your new Ninja®product within ten (10) days of
purchase. You will be asked to provide the store name, date of purchase and model number along with your name and address.
The registration will enable us to contact you in the unlikely event of a product safety notification. By registering you
acknowledge to have read and understood the instructions for use, and warnings set forth in the accompanying instructions.
ONE (1) YEAR LIMITED WARRANTY
SharkNinja Operating LLC warrants this product to be free from material defects and workmanship for a period of one (1)
year from the date of purchase when utilized for normal household use, subject to the following conditions, exclusions and
exceptions.
The liability of SharkNinja Operating LLC is limited solely to the cost of the repair or replacement of the unit at our option.
This Limited Warranty does not cover normal wear of parts and does not apply to any unit that has been tampered with or
used for commercial purposes. This Limited Warranty does not cover damage caused by misuse, abuse, negligent handling or
damage due to faulty packaging or mishandling in transit. This Limited Warranty does not cover damage or defects caused by
or resulting from damages from shipping or repairs, service or alteration to the product or any of its parts, which have been
performed by a repair person not authorized by SharkNinja Operating LLC.
If your appliance fails to operate properly while in use under normal household conditions within the Limited Warranty period,
youmayreturnthecompleteapplianceandaccessorieswithproofofpurchaseanddate,freightprepaid.ForCustomerService
support, call 1-877-646-5288 or visit our website www.ninjakitchen.com.
If the appliance is found by SharkNinja Operating LLC to be defective, in SharkNinja Operating LLC’s sole discretion, we
will repair or replace it free of charge. Proof of purchase date and a check made payable to SharkNinja Operating LLC in the
amount of $19.95 to cover the cost of return shipping and handling must be included.*
This Limited Warranty is extended to the original purchaser of the unit and excludes all other legal, implied and/or conventional
warranties. The responsibility of SharkNinja Operating LLC if any, is limited to the specific obligations expressly assumed
by it under the terms of this Limited Warranty. In no event is SharkNinja Operating LLC liable for incidental or consequential
damages to anyone of any nature whatsoever. Some states do not permit the exclusion or limitation of incidental or
consequential damages, so the above may not apply to you.
This Limited Warranty gives you specific legal rights, and you may also have other rights which vary from state to state or from
province to province.
*IMPORTANT: Carefully pack item to avoid damage in shipping. Be sure to include proof of purchase date and
to attach tag to item before packing with your name, complete address and phone number with a note giving
purchase information, model number and what you believe is the problem with the item. We recommend you insure
the package (as damage in shipping is not covered by your Limited Warranty). Mark the outside of your package
“ATTENTION CUSTOMER SERVICE”.

SharkNinja Operating LLC
US: Newton, MA 02459
CAN: Ville St-Laurent, QC H4S 1A7
1-877-646-5288
www.ninjakitchen.com
Ninja and Nutri Ninja are registered trademarks of SharkNinja Operating LLC.
Illustrations may differ from actual product. We are constantly striving to improve our
products, therefore the specifications contained herein are subject to change without notice.
ForSharkNinjaU.S.Patentinformationvisitwww.europro.com/USPatents
© 2015 SharkNinja Operating LLC
BL660Q_series_30_IB_EN_150813_3
PRINTED IN CHINA