Ninja CT682SP User manual

OH THE PASTA-BILITIES
VISIT
NINJAKITCHEN.COM
FOR ACCESSORIES, RECIPES, AND MORE.
1.
Fill Single-Serve
Cup with desired
contents.
2.
Screw on Pro Extractor
Blades Assembly
clockwise until you
have a tight seal.
1.
Select
any of the
illuminated
programs
to begin
blending.
2.
Flip cup
upside down
and lower
it onto base.
2.
When blending is
complete, turn cup
counterclockwise
and lift to remove.
WARNING: Handle the Pro Extractor Blades Assembly with care, as the blades are sharp.
3.
Turn cup
clockwise to
lock in place.
3.
Turn blade
assembly
counterclockwise
to remove.
4.
Place Spout
Lid on top of
cup and turn
clockwise to
lock in place.
ASSE M B LY
BLEND & ENJOY
SINGLE-SERVE CUP
NINJA INTELLI-SENSE™ KITCHEN SYSTEM
QUICK ASSEMBLY
Please make sure to read the enclosed Ninja® Owner’s Guide prior to using your unit.
CT682 SP
Connect the base to power source. Press and hold Power symbol. After the unit is turned on, display
will read “- --” until the cup is correctly connected to the base.
QUESTIONS? We’re here to help. Call 1-877-646 -5288 or visit ninjakitchen.com
SINGLE-SERVE CUP SPOUT LID PRO EXTRACTOR
BLADES® ASSEMBLY
PARTS
MIX
FUSION FUSION FUSION
FROZEN
DRINK
MIX
FUSION FUSION FUSION
FROZEN
DRINK
Once a container is locked onto base, the program buttons compatible with that container will illuminate.
FROZENDRINKS
SMOOTHIES
PUREE
PULSE
HIGH
MED
LOW/
DOUGH
AUTO
AUTO
AUTO
HIGH PULSE
LOW DOUGH
SMOOTHIE
SINGLE
SERVE
PUREE FROZEN
BLENDING
FROZENDRINKS
SMOOTHIES
PUREE
PULSE
HIGH
MED
LOW/
DOUGH
AUTO
AUTO
AUTO
ASSE M B LY
BLEND & ENJOY
TOTAL CRUSHING® PITCHER
Connect the base to power source. Press and hold Power symbol. After the unit is turned on, display
will read “- --” until the pitcher is correctly connected to the base.
QUESTIONS? We’re here to help. Call 1-877-646 -5288 or visit ninjakitchen.com
1.
Place the Total
Crushing Pitcher
on base and turn
clockwise to lock
in place.
2.
Holding Stacked
Blade Assembly by
the top of the shaft,
insert it into pitcher.
1.
Select any of
the illuminated
programs to begin.
3.
To pour out thinner
mixtures, ensure lid is
locked in place, then
open pour spout.
3.
Align arrows on
pitcher lid and
handle, then lower
handle to lock in
place.
2.
When blending is
complete, turn pitcher
counterclockwise and lift
to remove.
4.
For thicker mixtures, press
RELEASE button and lift
handle to remove lid, then
carefully lif t out blade
assembly before pouring.
TOTAL CRUSHING
PITCHER PITCHER LID STACKE D B L A D E
ASSEMB LY
PARTS
WARNING: Stacked Blade Assembly is sharp and not locked in place. Make sure lid is locked onto the
pitcher before pouring. If pouring without lid, carefully remove Stacked Blade Assembly first. Failure
to do so will result in a risk of laceration. Refer to the Ninja Owner’s Guide for additional information.
Once a container is locked onto base, the program buttons compatible with that container will illuminate.
PROCESS & ENJOY
PRECISION PROCESSOR™ BOWL
Connect the base to power source. Press and hold Power symbol. After the unit is turned on, display
will read “- --” until the bowl is correctly connected to the base.
QUESTIONS? We’re here to help. Call 1-877-646 -5288 or visit ninjakitchen.com
1.
Select any of
the illuminated
programs to begin.
2.
Remove bowl from
base by turning it
counterclockwise,
then lifting it o.
4.
Remove blade
assembly before
emptying bowl.
PRECISION
PROCESSOR BOWL BOWL LID CHOPPING BLADE ASSEMB LY
DOUGH BLADE
ASSEMB LY
PARTS
WARNING: Chopping Blade Assembly is sharp and not locked in place. Before pouring, carefully
remove blade assembly. Failure to do so will result in a risk of laceration. Refer to the Ninja®
Owner’s Guide for additional information.
1.
Place Precision
Processor Bowl
on base and turn
clockwise to lock
in place.
2.
Holding the blade
assembly by the top
of the shaft, insert it
into bowl.
Once a container is locked onto base, the program buttons compatible with that container will illuminate.
ASSE M B LY
FROZENDRINKS
SMOOTHIES
PUREE
PULSE
HIGH
MED
LOW/
DOUGH
AUTO
AUTO
AUTO
3.
Remove lid by
pressing the RELEASE
button on side of front
tab and lifting up.
3.
Align arrows on
bowl lid and handle,
then lower handle
to lock in place.

Trim ingredients so they are
no taller than the Feed Chute (4").
For butternut squash and potatoes,
the max recommended height is 3".
Cut ingredient so it is no more than
3" wide. Trim evenly from all sides to
maintain a roughly cylindrical shape.
DO NOT cut in half lengthwise.
3" 3"
4”
4”
3”
FOR BEST RESULTS, PREPARE YOUR
INGREDIENTS BEFORE SPIRALIZING
Peel ingredients with tough
skin, like sweet potatoes and
butternut squash.
Cut both ends o ingredient to
create flat surfaces, helping to
secure ingredient to both the
Blade Disc pin and Food Pusher.
Trim tapered ingredients like
carrots to make them more
symmetrical. Ingredients must
be larger than 1.5" in diameter.
1.5"
SPIRALIZER FOOD PREP
AUTO-SPIRALIZER™
AUTO-SPIRALIZER™ CONT.
Please make sure to read the enclosed Ninja® Owner’s Guide prior to using your unit.
CT682 SP
COLLECTING
BOWL
SPIRALIZER
BOWL
FEED CHUTE LID FOOD PUSHER
PARTS
ASSE M B LY HOW TO SPIRALIZE
WARNING: Handle Blade Discs with care, as the blades are sharp. WARNING: When using the Auto-Spiralizer, always use the Food Pusher. Never feed ingredients
by hand or with other utensils. Failure to use the Food Pusher may cause personal injury.
WARNING: Handle Blade Discs with care, as the blades are sharp.
3.
Select Blade Disc and fit
it onto top of Collecting
Bowl. Rim of Blade Disc
should sit flush against
top of bowl.
4.
Place Feed Chute Lid
on top of Spiralizer
Bowl. Turn lid clockwise,
aligning gray tabs on lid
with front of bowl.
2.
Place Collecting Bowl
inside Spiralizer Bowl,
aligning it over gear shaft.
1.
Place Spiralizer Bowl on
base and turn clockwise
to lock in place.
1.
Insert ingredient
through opening
in top of Feed
Chute Lid.
3.
Place Food
Pusher on top of
ingredient and
press down firmly
to hold in place.
4.
Select GO to begin
spiralizing. Continue
to press firmly with
Food Pusher to guide
ingredient through
Feed Chute.
5.
Spiralizing is complete
when Food Pusher sits
flat atop Feed Chute
Lid. Press STOP to end
the process.
2.
Center ingredient
over Blade Disc
pin, then press
down, securing
ingredient on pin.
MIX
FUSION FUSION FUSION
FROZEN
DRINK
MIX
FUSION FUSION FUSION
FROZEN
DRINK
MIX
FUSION FUSION FUSION
FROZEN
DRINK
MIX
FUSION FUSION FUSION
FROZEN
DRINK
PASTA STYLES
QUESTIONS? We’re here to help. Call 1-877-646 -5288 or visit ninjakitchen.comQUESTIONS? We’re here to help. Call 1-877-646 -5288 or visit ninjakitchen.com
Once a container is locked onto base, the program buttons compatible with that container will illuminate.
BLADE DISC
MIX
FUSION FUSION FUSION
FROZEN
DRINK
SELECT DESIRED BLADE DISC PRIOR TO ASSEMBLY*
FETTUCCINE
GREEN DISC
SPAG HETTI
RED DISC
ANGEL HAIR
YELLOW DISC
RIBBON
BLUE DISC
PAPPARDELLE
ORANGE DISC
MIX
FUSION FUSION FUSION
FROZEN
DRINK
MIX
FUSION FUSION FUSION
FROZEN
DRINK
MIX
FUSION FUSION FUSION
FROZEN
DRINK
MIX
FUSION FUSION FUSION
FROZEN
DRINK
MIX
FUSION FUSION FUSION
FROZEN
DRINK
THIN THICK
*Some Blade Discs might not be included with your unit. To see which Blade Discs
come with your Ninja® Intelli-Sense™ Kitchen
System, check the parts list on the top
panel of your box. Additional Blade Discs can be purchased at ninjaaccessories.com
NINJA INTELLI-SENSE™ KITCHEN SYSTEM
QUICK ASSEMBLY
CLEANING
Dishwasher: The containers, lids, blade discs,
and blade assemblies are all dishwasher safe.
The lids, blade discs, and blade assemblies are
top-rack dishwasher safe. Ensure the blade
assemblies are removed from the containers
before placing in the dishwasher.
Hand-Washing: Wash containers, lids, and blade
assemblies in warm, soapy water. When washing
the blade assemblies, use a dishwashing utensil with
a handle to avoid direct hand contact with blades.
Handle blade assemblies with care to avoid contact
with sharp edges. Rinse and air-dry thoroughly.
NINJA® INTELLI-SENSE™ KITCHEN SYSTEM
QUESTIONS? We’re here to help. Call 1-877-646 -5288 or visit ninjakitchen.com
TOTAL CRUSHING®
PITCHER
SINGLE-SERVE
CUP
PRECISION
PROCESSOR™ BOWL
Smoothie
Fresh/Frozen Fruits
Mi l k / Yo g urt
Protein Shakes
Frozen Drink
Margaritas
Daiquiris
Milkshakes
Ice Cream
Sorbet
Sherbet
Frozen Yogurt
Snow Cone
Granitas
Snow Cones
Fruit Slushies
Smoothie
Fresh/Frozen Fruits
Mi l k / Yo g urt
Protein Shakes
Extract
Whole Fruits/Vegetables
Fibrous Ingredients
Seeds
Refresher
Fresh Fruits
Water/Coconut Water
Herbs
Dressing
Marinades
Dressings
Condiments
Puree
Hummus
Pesto
Sauces
Chop
Veggie Prep
Salsa
Mince
Dough
Pie Crust
Bread/Pizza Dough
Cookies
Dips
Salsa
Dips
Sauces
Connect the base to power source. Press and hold Power symbol. After the unit is turned on, display
will read “- --” until the Auto-Spiralizer is correctly connected to the base.
Touchscreen: Clean touchscreen with a soft material to avoid scratching.
To remove residue from the screen, you may use an all-purpose cleaner.
WARNING: Handle the blade assemblies and blade discs with care when washing,
as the blades are sharp. Contact with the blades’ edges can result in laceration.
WARNING: Always unplug your blender base before cleaning.
SMART VESSEL RECOGNITION
Smart Vessel Recognition intuitively displays advanced pre-setprograms
available for each container. Simply select from specially tailored programs
on an easy-to-use touchscreen for consistent results with zero guesswork.