Noble House Home Furnishings Dining Chair User manual

Label Picture Description QTY
A Backrest Panel 1
B Seat Panel 1
C
Left Arm Leg with Pre-
attached
Levellers
1
D
Right Arm Leg with
Pre-attached
Levellers
1
Assembly Instructions
Caution : You must read this before you proceed
Dining Chair
CAUTION : This chair is NOT a TOY.
Keep your child / children at bay in the process of assembly.
Parts List
Noble house Home Furnishings LLC Page 1 OF 6

Label Picture Description QTY
①Bolt(M8*25mm) 5
②Bolt(M8*30mm) 5
③Washer(8mm) 9
④Spring Washer(8mm) 9
⑤Plastics Cap(8mm) 5
⑥Allen Wrench 1
⑦Spanner 1
Hardware
Assembly Preparation
Before
Beginning
Assembly:
X5
X5
X5
X9
X9
Noble house Home Furnishings LLC Page 2 OF 6

Step 1
Assembly Steps
Overview
This chair has multiple parts and may require up to 30 minutes to
assemble.
To give you an overview of the chair parts, the above picture is to
help you put the various parts into perspective.
Please read through the instructions below to familiarise yourself
with the parts and steps before assembly.
Unpack and place all parts on a clean soft surface.
FRONT FACING
Backrest Panel(A)
Seat Panel(B)
Left Arm Leg with
Pre-attached
Levellers (C)
Right Arm Leg with
Pre-attached
Levellers(D)
Noble house Home Furnishings LLC Page 3 OF 6

Step 2
Step 3
Then attach Chair Seat Panel(B) to Left Arm Leg with Pre-attached
Levellers(C) using Bolts(②), Spring Washers(④) and Washers(③)
with Allen Wrench(⑥).
Do not fully tighten at this stage.
Attach Backrest Panel(A) to the Left Arm Leg with Pre-attached
Levellers(C) using Bolts(①), Spring Washers(④) and Washers(③)
with Spanner(⑦).
Do not fully tighten at this stage.
Noble house Home Furnishings LLC Page 4 OF 6

Step 4
Step 5
Stand the chair upright.
Now, in a sequential manner, fully and securely tighten all bolts at
all joints.
Adjust the Pre-attached Levellers on the Chair Legs until the chair is
level with the ground.
Then Add Plastics Caps(⑤) on 4 bolt ends on the Backrest Panel of
the chair to protect skin or clothing from getting snagged.
Your Chair is ready for use.
Caution: This Chair can only be used on a flat, level surface.
Repeat the same step to attach Backrest Panel(A) and Seat
Panel(B) to Right Arm Leg with Pre-attached Levellers(D).
DO NOT fully tighten at this stage.
Noble house Home Furnishings LLC Page 5 OF 6

Noble house Home Furnishings LLC Page 6 OF 6