Noble House Home Furnishings LANTERN User manual

CAUTION : This Lantern is NOT a TOY.
Keep your child / children at bay in the process of assembly.
For turning the Lantern and to prevent damage to the Lantern, 02
persons may be needed to execute this action.
LANTERN
CAUTION: You must read this before you proceed.
Noble House Home Furnishings LLC 1 of 8

No. Qty
A1
B2
C2
D1
E1
F1
G1
H2
No. Qty
①13
②1
Picture
Allen Key
Top Panel
Description
Picture
Side Support Bar
Screws
(M6x60mm)
Glass
Description
Second Leg Panel
Candle Tray
Side Panel
First Leg Panel
Base
Noble House Home Furnishings LLC 2 of 8

Step 1
Unpack and place all parts on a clean, non-marring surface.
This Lantern has multiple parts and may require up to 30 minutes to assemble.
To give you an overview of the Lantern parts, the above picture is to help you put the various parts into
perspective.
Please read through the instructions herebelow to familiarise the parts and steps before assembly.
Before Beginning Assembly:
FRONT FACING
Base (G)
Second Leg Panel(E)
OVERVIEW
Top Panel (A)
Side Support Bar(B)
Side Panel(C)
First Leg Panel(D)
Candle Tray(F)
Glass (H)
Noble House Home Furnishings LLC 3 of 8

With the help of your adult partner, align the First Leg Panel (D) to Base (G) and Candle Tray
(F),secure by using Screws (①) and Allen Key (②) as shown above
Then, affix Side Support Bar (B) to First Leg Panel (D), secure by using Screws (①) and Allen Key
(②) as shown above
DO NOT FULLY TIGHTHEN SCREWS.
With the help of your adult partner, Position the support bar of Candle Tray (F) and Base(G) to the
housing of Side Panels (C) as shown in picture above.
Step 2
Step 3
Noble House Home Furnishings LLC 4 of 8

Step 5
Step 4
With the help of your adult partner, turn the pre-assembled on step 3 up side down
Position the Glass (H) into the rail of the First Leg Panel (D) and Support Bar (B).
With the help of your adult partner, attach the Second Leg Panel (E ) to the pre-assembled on step 4,
secure by using Screws (①) and Allen Key (②) as shown above
DO NOT FULLY TIGHTHEN SCREWS.
Noble House Home Furnishings LLC 5 of 8

Lock the Top (A) to the Lantern as shown above.
Step 7
Attach the hook of Top Panel (A) to the pre-assembled on step 5 as shown above.
Step 6
Noble House Home Furnishings LLC 6 of 8

Step 9
Inspect it and make sure all parts are adequately connected.
Ensure all screws, bolts are fully locked into position and secured.
This Lantern can only be used on a flat, level surface.
The Lantern is ready to be used.
Inspect the Lantern and make sure all parts are adequately connected.
In a sequential manner, tighten all Screws at all joints.
With assistance from your adult partners, adjust the Levellers to desired height to avoid wobbles.
Step 8
Adjust Pre-installed Levellers
height for balance
Noble House Home Furnishings LLC 7 of 8