Noble House Home Furnishings Reclining Chair User manual

Caution : You must read this before you proceed
Reclining Chair
Label Picture Description QTY
AChair Backrest 1
BLeft Wing
(Labelled B) 1
CRight Wing
(Labelled C) 1
DChair Base with
Footrest 1
Noble house Home Furnishings LLC Page 1 of 6

Before Beginning
Assembly:
Parts Introduction
This Reclining Chair has multiple parts and may require up to some 30 minutes to assemble. To give you an overview of the
Reclining Chair parts, the above picture is to help you put the various parts into perspective. Please read through the
instructions below to familiarise yourself with the parts and steps before assembly.
Step 1
Take out 2 wings from the none woven bag, which is put on the back of the recliner seat.
Noble house Home Furnishings LLC Page 2 of 6

Step 2
With assistance from your adult partner, hold up the Chair Backrest(A), while standing behind the Chair.
Insert the small metal arms on the sides of the Chair Backrest(A) into the prefabricated slide lock gadget
on the Chair Base with Footrest(D) as shown above.
Firmly but gently, push the Chair Backrest(A) downwards until the Backrest is fully slotted and locked into
position.
Step 3
Align the mounting brackets of the Right Wing(C) with those on the right side of Chair Backrest(A).
Then slide Right Wing(C) down by hand to make sure it locks into the position as shown in the picture.
Step 4
Noble house Home Furnishings LLC Page 3 of 6

Align the mounting brackets of the Left Wing(B) with those on the left side of Chair Backrest(A).
Then slide Left Wing(B) down by hand to make sure it locks into the position as shown in the picture.
Step 5
Smooth down the fabric flap on the Chair Backrest(A).
Run your hands down both sides of the flap, from top to bottom, allowing the velcro tape to adhere to the flap under the seat
of the chair.
Step 6
Make sure all parts are connected and securely locked into position.
Your Glider Recliner Chair is ready for use.
Step 7
To dissassemble the Chair Backrest(A).
Open the back flag on the right side with a flat screwdriver and pull the metal slightly.
Pull up the right side of Chair Backrest(A).
Then repeat the same process with the left side of the Chair Backrest(A).
User Instructions.
Recliner Chair
Please read the Instruction Manual below carefully before use.
Noble house Home Furnishings LLC Page 4 of 6

Children must be supervised when using this Recliner Chair.
Warning
Do not let children stand in front of or behind the Reclining Chair when opening or closing the footrest.
Do not put you hands inside the Footrest when opening or closing the footrest.
Do not sit any side of Chair.
Do not open trigger when you want to close the Footrest, just push it by your feet.
To get into a reclined posture - To Recline backrest
Sit into the seat.
Open the trigger on the outside of right armrest.
Use your body weight and push backwards into the seat into a fully reclined position.
To get out of chair - move Seatback into Upright Position
Tilt your body weight slightly forward and upwards.
The seat back will come up to an upright position.
Use your feet to push the footrest down.
The chair will automatically lock when it is in the fully upright position.
Where necessary, use your arms help lift/push yourself out of the seat.
Noble house Home Furnishings LLC Page 5 of 6

Noble house Home Furnishings LLC Page 6 of 6