Noble House Home Furnishings Loveseat User manual

Assembly Instructions
Caution: You must read this before you proceed
Loveseat
CAUTION: ThisLoveseat is NOT a TOY.
Keep your child / children at bay during the assembly process.
Whenever lifting or moving the Loveseat and to prevent damage to the Loveseat,
two adults may be needed to execute these actions.
Noble House Home Furnishings LLC 1

Label Picture Description QTY
A Seat Panel 1
B Backrest Panel 1
C Leg Frame 2
D Seat Cushion 1
E Pillow 2
Label Picture Description QTY
①Bolt
(M8x30mm) 9
②Bolt
(M6x40mm) 7
③Allen Key 2
Hardware
Part List
Noble House Home Furnishings LLC 2

Assembly Preparation
Before Beginning Assembly:
Noble House Home Furnishings LLC 3

Overview
Assembly Steps
This Loveseat has multiple parts and may require up to 30 minutes to assemble. To give you an
overview of the Loveseat parts, the above picture is to help you put the various parts into
perspective. Please read through the instructions below to familiarise yourself with the parts and
steps before assembly.
Unpack and place all parts on a clean, non-marring surface.
Step 1
Leg Frame (C)
Backrest Panel (B)
FRONT FACING
Seat Cushion (D)
Seat Panel
(A)
Pillow (E)
Noble House Home Furnishings LLC 4

Place Seat Panel(A) facedown on a clean, non-marring surface.
Attach Leg Frame(C) to Seat Panel(A) using Bolts(①) with Allen Key(③).
Do not fully tighten the Bolts.
Step 2
Step 3
Attach the remanning Leg Frame(C) to Seat Panel(A) using Bolts(①) with Allen Key(③).
Do not fully tighten the Bolts.
A
C
C
A
Noble House Home Furnishings LLC 5

Place Backrest Panel(B) on a clean, non-marring surface.
With assistance from your adult partners, align Seat Panel(A) to Backrest Panel(B) as shown
above.
Attach Backrest Panel(B) to Seat Panel(A) using Bolts(②) with Allen Key(③)
Do not fully tighten the Bolts.
Step 4
Noble House Home Furnishings LLC 6

Step 6
Your Loveseat is ready for use.
This Loveseat can only be used on a flat, level surface.
Step 5
With assistance from your adult partners, Turn the Loveseat right side up.
Inspect the Loveseat and make sure all parts are adequately connected.
Carefully sit onto the Loveseat.
This pressure will help align all parts at all joints.
In a sequential manner, tighten all Bolts at all joints.
Place Seat Cushion(D) and Pillows(E) onto the Loveseat as shown above.
Then affix the velcro straps around the Loveseat as shown above.
D
E
Noble House Home Furnishings LLC 7

Noble House Home Furnishings LLC 8