Noble House Home Furnishings NIGHTSTAND User manual

WARNING!!
Furniture Tipping Risk.
Serious risk of severe or fatal crush injuries can occur from
furniture tipping over if not secured.
Children like to climb on furniture and Unsecured furniture can
pose a serious danger.
Please follow all instructions and install the tip-over restraints
provided.
In addition to installing the restraints, to help prevent tip-over:
1. Place heaviest items in the lowest drawers,
2. Unless specifically designed to accommodate, do not set TV’s or
other heavy objects on top of this product,
3. Never allow children to climb or hang on drawers, doors, or
shelves,
4. Do no leave drawers open,
5. Never open more than one drawer at a time, and
6. Do not step on the base.
Noble House Home Furnishings LLC Page 1 OF 9

NIGHTSTAND
Please look under the Cabinet for hardware pack.
CAUTION : This Nighstand is NOT a TOY. Keep your child / children at bay in the process of
assembly.
For turning / flipping the nightstand and to prevent damage to the nightstand, 02 persons may
be needed to execute this action.
Caution : You must read this Assembly Instructions before you proceed.
Assembly Instructions
Noble House Home Furnishings LLC Page 2 OF 9

No. Qty
A1
B4
①
3
②
3
③
4
④
2
⑤
2
⑥
5
⑦
2
⑧
1
⑨
1
⑩
1
Bolt (M6 x 100 mm)
Hammer (not provided)
Screwdriver (not provided)
Nighstand Restraint Strap
Plastic Anchor (5F)
Power Drill (not provided)
Allen Wrench (K4)
Self Tapping Screws (M4x 20mm)
Self Tapping Screws (M5x 40mm)
L-shape Metal Brackets
Cabinet
Leg
Hardware
Nightstand Restraint Device Hardware
Parts List
Picture
Description
Noble House Home Furnishings LLC Page 3 OF 9

Assembly Steps
This Nightstand has multiple parts and may require up to 45 minutes to assemble. To give you an overview of
the Nightstand parts, we've provided the above picture to put the various parts in perspective. Please read
through the instructions below to familiarise yourself with the parts and steps before assembly.
Read instructions, cover to cover.
Have 2 adults on hand for assembly.
Do not assemble on flooring or carpet.
Assemble on a clean non-marring surface (packing foam).
Save all packaging until finished.
OVERVIEW
Assembly Preparation
Before Beginning Assembly:
FRONT FACING
Cabinet
Leg
Noble House Home Furnishings LLC Page 4 OF 9

Step 1
With assistance from your adult partner, carefully lay the Cabinet (A) down with the door faceup on a clean,
non-marring surface as shown above.
Attach the Legs (B) to the Cabinet (A) using Bolts (⑥) and the Allen Wrench (⑦) as shown above.
Unpack and place all parts on a clean, non-marring surface.
Step 2
Noble House Home Furnishings LLC Page 5 OF 9

Step 4
Step 3
Step 3.1: Using a Philips Screwdriver (Not Provided), take the Handle which can be found behind the door.
Step 3.2: To affix the Handle, align the positioning of the Bolts and the Handle to the mounting positions on
the Door.
Insert the Bolts through the mounting positions and affix the Handle by using a Philips Screwdriver (Not
Provided), as shown in the above picture.
Close the Door of the Nightstand
Ensure that all bolts and the Handle of the Nightstand are fully driven in and locked in.
The Nightstand now is ready to be used.
Caution: This Nightstand can only be used on a flat, level surface.
Noble House Home Furnishings LLC Page 6 OF 9

A: Turn the Nighstand around as shown above.
Then affix one Metal Bracket (③) to the back of the Nightstand using the 2.0cm Self Tapping Screw (①) and
Screwdriver(⑧)(not provided).
The distance of the screw mounting position to the two edges is about 1".
Repeat this step to affix another Metal Bracket (③) to the Nightstand, as shown above.
Nightstand Restraint Device Installation Instruction
Serious or fatal crushing injuries can occur from tipping furniture.
To help prevent tip-over: ALWAYS secure this furniture to the wall
using Nightstand Restraint Device.
See product instructions for more ways to help prevent furniture tip-overs.
Uasge For Nightstand Restraint Device：
To secure the Nightstand against the wall, affix 2pcs Metal Brackets (③) to the wall and 2pcs Metal Brackets
(③) to the Nightstand. Then, use the Nightstand Restraint Strap (④) to connect the Metal Brackets (③) on
the wall to the Metal Brackets (③) on the Nightstand. Find details as below:
Noble House Home Furnishings LLC Page 7 OF 9

C: Affix the L-shaped Metal Bracket (③) to the wall.
(Caution:The space between the Nightstand Restraint Strap (④) and the Metal Backets (③) on the
Nightstand and the wall should be a maximum of 3.5".)
Then affix one L-shaped Metal Bracket (③) to the hole in the wall using the 4cm Self Tapping Screws (②)
and Screwdriver (⑧)(not provided). .
Repeat this step to affix the other Metal Bracket (③) to the wall as shown above.
B：Determine the location where the screws should be inserted into the wall.
First, mark the point at the same height on the wall as the L-shaped Metal Bracket (③) on the Nightstand.
Here are two helpful ways to find these points:
1.Move the Nightstand back against the wall, and mark the wall, ensuring the points on the wall are at the
same height as the metal brackets on the Nightstand.
2.Using a ruler, measure the height from the floor to the Metal Bracket (③) on the Nightstand, and then
measure the same height from the floor up the wall, and mark the wall at that same height.
Using a Power Drill(⑨)(not provided), drill a hole in the wall, then insert a Plastic Anchor (⑤) into the hole
using a Hammer(⑩) (not provided).
Repeat this step to affix the other Plastic Anchor (⑤) into the wall, as shown above.
Noble House Home Furnishings LLC Page 8 OF 9

D: Move the Nightstand against the wall. Then pull the Nightstand Restraint Strap (④) through the two Metal
Brackets (③), one by one, and lock the Nightstand Restraint Strap (④) tight, as shown above.
The Nightstand Restraint Device is now installed and is ready for use.
Care & Maintenace
3.5"
3
4
3
Noble House Home Furnishings LLC Page 9 OF 9