Noble House Home Furnishings Chair User manual

Caution : You must read this before you proceed
CHAIR
CAUTION : This Chair is NOT a TOY.
Keep your child / children at bay during the assembly process.
For moving the Chair and to prevent damage to the Chair two adults are needed to
execute this action.
Noble House Home Furnishings LLC Page 1/6

Label Picture Description QTY
A Seat panel 1
B Leg 4
Label Picture Description QTY
①Bolt (M8x15mm) 13
②Flat Washer
(M8.5/20x2mm) 13
②(M8.5/20x2mm) 13
③Allen key 2
Before Beginning Assembly:
Noble House Home Furnishings LLC Page 2/6

OVERVIEW
This Chair has multiple parts and may require up to 30 minutes to assemble. To
give you an overview of the Chair parts, the above picture is to help you put the
various parts into perspective. Please read through the instructions below to
Step 1
familiarise yourself with the parts and steps before assembly.
Unpack and place all parts on a clean, non-marring surface.
Noble House Home Furnishings LLC Page 3/6

Step 2
Step 3
② ①
Insert leg (B) into the seat panel (A), put the flat washers (②) and bolt (①) as above
picture.
Affix leg (B) and seat panel (A) by using Allen key (l).
Repeat the same process with the other 3 Legs (B)
Do not fully tighten the Bolts.
Noble House Home Furnishings LLC Page 4/6
A
A
B
3
1
2
Lay the Seat panel (A) facedown onto a clean, flat surface to avoid any scratches or
damage to the product.

Step 4
Noble House Home Furnishings LLC Page 5/6
Place the Chair right side up on a LEVEL SURFACE to see if it wobbles.
If it wobbles, lift the Chair 30cm to 50cm high from the ground.
Keep your feet and toes well away from the drop zone.
Drop the Chair freely and vertically with all four legs, hitting the ground at the same time.
This Drop Test will help to ensure that all the Bolts, Screws and gaps reach full alignment status.
Test again for evenness on a LEVEL SURFACE.
If no wobbles are found, proceed to tighten all the Bolts, Screws.
When tightening the Bolts, Screws, tighten sequentially.
Do not tighten any Bolt, Screws fully and then move towards the next one.
This could cause the frame to warp.
If there are still wobbles, loosen the Bolts, Screws and execute the same drop tests.
If the Chair is not stable it could lead to damage to the product.
Your Chair is ready for use.
This Chair can only be used on a flat, level surface.
If wobble
Test again
30cm -50 cm

Do not clean furniture with harsh cleansers or polish.
Do not put hot items directly on furniture surface
Children should not climb or jump on the furniture.
To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to direct sunlight is
recommended.
Do not write on furniture without a padded barrier to protect the surface.
Not for commercial use. For residential use only.
Stains may be removed with mild soap solution and damp cloth.
To obtain the longest lifespan of your outdoor products, avoid extended and lengthy
exposure to rain, snow, and direct sunshine. Whenever possible cover the product and
/or place under patio or awnings.
Noble House Home Furnishings LLC Page 6/6
Dust and pick-up spills using a clean, non-colored, lint-free cloth .

Caution : You must read this before you proceed
TABLE
CAUTION : This Table is NOT a TOY.
Keep your child / children at bay during the assembly process.
For moving the Table and to prevent damage to the Table, two adults are needed to
execute this action.
Noble House Home Furnishings LLC Page 1/6

Label Picture Description QTY
A Table top 1
B Leg 4
Label Picture Description QTY
①Bolt (M8x15mm) 13
②Flat Washer
(M8.5/20x2mm) 13
②(M8.5/20x2mm) 1
③Allen key 2
Before Beginning Assembly:
Noble House Home Furnishings LLC Page 2/6

OVERVIEW
This Table has multiple parts and may require up to 30 minutes to assemble. To
give you an overview of the Table parts, the above picture is to help you put the
various parts into perspective. Please read through the instructions below to
familiarise yourself with the parts and steps before assembly.
Step 1
familiarise yourself with the parts and steps before assembly.
Noble House Home Furnishings LLC Page 3/6
Unpack and place all parts on a clean, non-marring surface.
FRONT FACING
Leg (B)
Table top (A)

Step 2
With the assistance of an adult, lay the Table panel (A) facedown onto a clean, flat
Step 3
With the assistance of an adult, lay the
surface to avoid any scratches or damage to the product.
② ①
Insert leg (B) into the table top (A), put the flat washers ( ②) and bolt (①) as above
picture.
Affix leg (B) and table top (A) by using Allen key ( l).
Repeat the same process with the other 3 Legs (B)
Do not fully tighten the Bolts.
Noble House Home Furnishings LLC Page 4/6
A
A
B
3
1
2

Step 4
With assistance from your partners, turn the Table back to normal flat ground
EXERT pressure, floorwards, onto the Table
This pressure will help the Legs and Table Top reach alignment at all joints.
Check for wobbles.
In a sequential manner, gradually tighten all Bolts until evenly secured.
Inspect the Table and make sure all parts are adequately connected.
Your Table is ready for use.
This Table can only be used on a flat, level surface.
Noble House Home Furnishings LLC Page 5/6

Do not clean furniture with harsh cleansers or polish.
Do not put hot items directly on furniture surface
Children should not climb or jump on the furniture.
To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to direct sunlight is
recommended.
Do not write on furniture without a padded barrier to protect the surface.
Not for commercial use. For residential use only.
Stains may be removed with mild soap solution and damp cloth.
Dust and pick-up spills using a clean, non-colored, lint-free cloth .
To obtain the longest lifespan of your outdoor products, avoid extended and lengthy
exposure to rain, snow, and direct sunshine. Whenever possible cover the product and
/or place under patio or awnings.
Noble House Home Furnishings LLC Page 6/6