Noble House Home Furnishings TV CABINET User manual

Noble House Home Furnishings LLC
Page 1
Assembly Instructions
Lable
Picture
Description
Qty
Caution : You must read this before you proceed
CABINET
Parts List
A
Wooden Cabinet
1
B
Metal Leg
4

Lable
Picture
Description
Qty
Hardware
③
Allen Key
1
①
②
Washer
13
Bolt
6.0X20.0 mm
13
④
Screwdriver
(not provided)
1
Before
Beginning
Assembly:
Noble House Home Furnishings LLC
Page 2
Assembly Preparation

Assembly Steps
Overview
With help of your adult partner, carefully stand the wooden cabinet:
1.1 Put out the door and dissemble the Knob with the help of screw
driver (④).
1.2 Install the Knob on the door with the help of screwdriver (④) as
picture above.
This Cabinet has multiple parts and may require up to some 30 minutes
to assemble. The above picture is to help you in putting various parts
into perspective. Please read through the instructions below to
familiarise yourself with the parts and steps before assembly.
Step 1
Noble House Home Furnishings LLC
Page 3

Noble House Home Furnishings LLC
Page 4
Step 2
With assistance from your adult partner, place the Wooden Cabinet (A)
face down as picture, on a clean, non-marring surface. As shown in
“Step 2" picture attach Metal Leg (B) to Wooden Cabinet (A) using
Washers (①), Bolt (②) with Allen Key (③).
Tighten the Bolt fully in a sequential manner.
Repeat the same process to assembly remaining leg (B)
Step 3
Flip the Cabinet as Shown in "Step 3"

Noble House Home Furnishings LLC
Page 5
Care & Maintenance
In case if the floor is uneven, adjust levellers on the underside of the
legs up or down to compensate.
Once the cabinet is assembled, the levellers can be adjusted turning
the knob as shown in the "Step 4".
This Cabinet is now ready to use.
Caution : This Cabinet can only be used on flat, level surface.
Step 4