Nokia 1508I Quick start guide

1508i(RM-430)
Disassembly/Assembly Nokia Customer Care
Issue 1
Copyright © 2008 Nokia, All rights reserved
Nokia Customer Care
1508i (RM-430)
Mobile Terminal
Disassembly/Assembly

1508i(RM-430)
Disassembly/Assembly NokiaCustomerCare
Issue 1
Copyright © 2008 Nokia, All rights reserved
Contents
Disassembly Instructions
Assembly Instructions
Screw Order for Disassembly
Screw Order for Assembly

1508i(RM-430)
Disassembly/Assembly NokiaCustomerCare
Issue 1
Copyright © 2008 Nokia, All rights reserved
Disassembly Instruction
1 2
Depress battery latch and remove battery cover. Using the SRT-6 start at the bottom of the phone and
work around the edges to loosen the A-Cover.
3 4
Remove the A-Cover. Separate the keymat.
56
Remove the earpiece speaker by lifting with dental tool. Remove 6 ea. #5 TORX screws.

1508i(RM-430)
Disassembly/Assembly NokiaCustomerCare
Issue 1
Copyright © 2008 Nokia, All rights reserved
7 8
Remove LCD frame. Separate the engine module and C-Cover.
9 10
Lift and remove the antenna aasy using the SS-93. Lift and remove the IHF speaker using the SS-93.
11 12
Unlock LCD connector with SS-93. Using SS-93 carefuly lift LCD

1508i(RM-430)
Disassembly/Assembly NokiaCustomerCare
Issue 1
Copyright © 2008 Nokia, All rights reserved
13 14
Then the LCD with Cable is easy to move. Separate LCD module from engine module.
15 16
Carefully lift edge of key dome with dental tool. Pell back and remove key dome from engine
module.
.

1508i(RM-430)
Disassembly/Assembly NokiaCustomerCare
Issue 1
Copyright © 2008 Nokia, All rights reserved
Assembly Instructions
Perform the assembly in reverse order according to the instructions above.
Screw Order for Disassembly
Screw Order for Assembly
Torques Information
As shown in picture above: 19.6 Ncm