uBasic Phone Operation
Setting up your Nokia phone
Be sure the battery is charged. Your phone is
supplied with a dual volt charger (110/220 volt)
and an international adapter so it can be charged
anywhere in the world.
To power the phone on/off
Press and hold the power key as
shown until phone powers on or
powers off.
To unlock & lock the keypad
To unlock the keypad select Unlock, and
press the * key within 1.5 seconds.
To lock the keypad select Menu, and
press the * key within 3.5 seconds. To
answer a call when the keypad is locked, simply
press the call key.
Important Note: Cellhire recommends you lock the
keypad when you’re not using the phone. This prevents
erroneous calls and text messages from being sent.
To answer & end a call
To answer press the call key.
To end press the end call key.
To redial the last number called
Press the call key twice.
To make an emergency call
Dial 112 then press the call key.
To adjust volume
Press the volume keys located on the top-right
side of the phone.
uDialing Instructions
Calling a US number while in Japan
To call back to the US from Japan, you will need to dial
the following:
1. Enter 010
2. Enter the US country code, 1. (To call a different
country, see International Country Codes section)
3. Enter the phone number, including area code.
For example, to call Cellhire Support, dial:
Receiving a call from the US while in Japan
People in the US should dial the following to call you:
1. Enter 011
2. Enter the Japan country code, 81
3. Enter your Japan mobile number (without the rst 0)*
For example a call to your number from the US
would look like:
TIP: To make a local call within Japan enter the area
code (including the 0), followed by the phone number.
Writing and sending SMS messages
1. Select Menu > Messaging > Create Message >
Text Message.
2. Enter the recipient’s phone number in the To: eld.
To send the message to multiple recipients, add the
desired contacts one by one. Scroll right to add the
contacts manually in the To: eld. To retrieve the
contacts to which you recently sent messages,
select Add > Recently Used.
3. Scroll down and write your message in the
Message: eld.
4. To send the message, select Send, or press
the Call key.
uCellhire Country Codes
Country Codes to be used with Cellhire Solutions
Please note:
• All European countries have the same country
code of 44. This is because the Cellhire airtime
solution provided for these countries is a British
phone number designed to be used as a roaming
solution throughout Europe, so when calling the
device you must dial the 44 country code – even
when the device is not in Britain.
• Several countries listed below have country codes
of 1 – this is because these solutions include a
US number, so when calling the device you must
dial the 1 country code – even when the device is
outside of the US.
• All Vismo Tracking devices include a British phone
number so when calling the Vismo device you will
always dial the British country code of 44.
Destination Country Code
Australia only ....................................................... 61
Australia/New Zealand/Fiji ...................................... 1
Brazil ..................................................................... 1
Canada .................................................................1
China ..................................................................... 1
Costa Rica .............................................................1
Ecuador/Galapagos ............................................... 1
Europe ................................................................44
India ...................................................................... 1
Japan .................................................................. 81
New Zealand ......................................................... 1
Russia ................................................................... 1
South Africa ........................................................... 1
USA .......................................................................1
Vietnam/Cambodia ................................................ 1
uVoice Mail Instructions
Retrieving your VoiceMail messages
Your Nokia phone will automatically divert incoming
calls to a VoiceMail Messaging Service when the
phone is switched off, engaged or out of coverage.
Retrieval of messages left in your voicemail will be
charged at the standard call rate. Please refer to
your Rental Agreement.
Please follow the instructions below to retrieve your messages:
While in Japan
Dial 1416 then press the call key.
phone number
area code
US country code
010 1 214 355 5200
phone number
area code
(without the rst 0)*
Japan country code
011 81 XXXX XXX XXX
