Nokia 6610 - Cell Phone 625 KB User manual

Information at your finger tips when you
need it where you need it. Make rational
decisions based on the very latest figures!
www.flashmedia.co.za
User Manual
SenwesMobile
Available on both networks.
Dokument ook beskikbaar in Afrikaans.
http://www.senwes.co.za/senwesmobile/
enhanced mobile solutions provider

SenwesMobile–Users’ Manual v1.4 Page 2of 15
How to use this manu
al.
The following indicators are used to facilitate the use of the manual.
Tips provide concise, useful bits of information.
È
Tip
CAUTION
Cautions warn you about potential problems that a procedure
might cause, unexpected results, and mistakes to avoid.
Pressing a button on the phone
-
[Answer] -Press theAnswer button or indicatedAnswer button.
[Send] -Press Send button or indicatedSend button.
[*] -Press *button.
Information within square brackets indicates the button that must be pressed.
This manual is based on the Nokia interface.
Although different interfaces exist, the basic concept and actions stay the same.
Entering the service code to access data
-
*120*736937#
(S=7, E=3, N=6, W=9, E=3, S=7)
or
*120*SENWES#
Notes provide additional information that may help you avoid problems, or offer
advice relating to the topic.
NOTE

SenwesMobile–Users’ Manual v1.4 Page 3of 15
Enter your number-*120*736937#
and press the call button as if you want to dial the
number.
You will immediately receive an indication that the
system is busy handling your request with “Requesting”.
After a few seconds the following, or similar, screen will
appear on your phone1-
1-Based on the Nokia 6610 interface.
What is my next step?
How do I navigate between menus?
The screen will contain the following-
The date and time as well as the commodity. To the left of
thecommodity last or bid will be displayed.
bid -is the current updated bidding price in rand per ton.
last -after closure the last bidding price.
The contract month, for exampleFEB3, and the contract
price. The value following the contract price indicates a rise
or fall in the price.
Use the scrolling button to view the rest of the menu.
------
Service reply
------
* main menu,
8. Set Trigger
9. View Triggers
0. exit
Answer Back
------
Service reply
--
----
MAY3: 1296-45
JUL3: 1334 -45
SEP3: 0 0
DEC3: 0 0
Answer Back
------
Service reply
------
02-04 16:07
lastwm
FEB3: 1200 –107
MAR3: 1275 -45
Answer Back
[Scroll]
CAUTION
Ensure that the code is entered
correctly. If not the system will not
respond or an error message will
appear.
Save this number as a speed dial in
your phone. Consult your phone’s
manual if you are uncertain about the
procedure.
È
Tip
If this is your first exposure to a full interactive cell phone system, the following
should be borne in mind-
Most of the time the system will be waiting for your reaction, in other words your
next choice of the available options will be required. The only way, by which the
system can alert you to the fact that it requires your input, is to appear as a
message on your screen. The operation is similar to that of a bank auto teller.
Therefore all instructions by the system to the user will appear on the users cell
phone screen. Do not hesitate to experiment! You won’t cause any harm!
NOTE
Remember the cell phone has no scroll
indicator. It is good practice to always[Scroll]
to make sure you have read all info.
È
Tip

SenwesMobile–Users’ Manual v1.4 Page 4of 15
------
Service reply
------
0. Exit
Answer Back
------
Service reply
------
3. MAY3
4. JUL3
5. SEP3
6. DEC3
Answer Back
The last menu of the commodity range as well as the
exchange rate has 3 options-
•8. Set Trigger
•9. View Triggers.
•0. exit
Any option can be selected by pressing [Answer] the option
number for example[8] and [Send].
At the bottom of each menu
[Answer]
and
[Back]
or just
[Back]
will be displayed. If
[Answer]
and [Back] is displayed you have the option to respond to the menu.
A new set of menus will b
e displayed as reaction to sending
[8]
. In this
case the trigger menus.
123
182
Message:
8
Send Back
------
Service reply
------
Please select the
contract:
1. FEB3
2. MAR3
Answer Back
Remember to
[scroll]
. This will reveal parts of the menu which initially
are hidden.
È
Tip
------
Service reply
------
* main menu,
8. Set Trigger
9. View Triggers
0. exit
Answer Back
[Scroll]

SenwesMobile–Users’ Manual v1.4 Page 5of 15
------
Service reply
------
* main menu,
8. Set Trigger
9. View Triggers
0. exit
Answer Back
If you know the menu number
to which you want to move,
you can press[Answer], the
menu number, and[Send]
from any menu.
How do I navigate quickly
between menus?
123
182
Message:
6
Send Back
------
Service reply
------
MAY3: 1296-45
JUL3: 1334 -45
SEP3: 0 0
DEC3: 0 0
Answer Back
------
Service reply
------
02-04 16:07
lastwm
FEB3: 1200 –107
MAR3: 1275 -45
Answer Back
Scroll
[Answer] [6]
and
[Send]
will
take you directly to the
exchangeratemenu.
Quick navigation can be accomplished
by pressing
[Answer] the option number and[Send].
È
Tip
------
Service reply
------
9. View Triggers
0. exit
Answer Back
------
Service reply
------
Pound: 12.8082
Euro: 8.7628
*mainmenu,
8. Set Trigger
Answer Back
------
Service reply
------
*SENWES*
02-27 09:53
exc
Dollar: 8.1175
Answer Back
[Scroll]
Exchange rate

SenwesMobile–Users’ Manual v1.4 Page 6of 15
What are Triggers and how do I
use them?
Navigation from the main menu
123
182
Message:
*
Send Back
[Answer] [*]
and
[Send]
will
take you to the main menu.
Main Menu
Memorise the Main Menu option numbers.
This will come in handy for quick navigation.
È
Tip
[Scroll]
Triggers
are a unique feature of the application.
You can set triggers to instruct the system to inform you the moment a certain commodity or an
exchange rate reaches a certain level. You need never again be concerned that a contract price will
reach a level in which you are interested without you knowing.
The system also provides for maximum and minimum triggers. If you set a trigger higher than the
present price it is registered as a maximum. A trigger set below the present price will be registered as
a minimum. Any number of triggers can be set. For that reason provision is made to view your triggers
by selecting “View Triggers”.
------
Service reply
------
13. Settings
14. Help
0. Exit
Answer Back
------
Service reply
------
9. CBOT SOY
10. KS WH
11. GrainStock
12. InUitPar
Answer Back
------
Service reply
------
5. SOY
6. EX
7. CBOT CORN
8. CBOT WH
Answer Back
------
Service reply
------
1. WM
2. YM
3. WH
4. SU
Answer Back

SenwesMobile–Users’ Manual v1.4 Page 7of 15
------
Service reply
------
amount: 1299.0
Answer Back
------
Service reply
------
trigger price level,
you will be informed
by SMS.
Answer Back
------
Service reply
------
0. Exit
Answer Back
------
Service reply
------
3. MAY3
4. JUL3
5. SEP3
6. DEC3
Answer Back
------
Service reply
------
Please enter a
Trigger price. Ifthe
commodityprice
crosses this
Answer Back
------
Service reply
------
Please select the
contract:
1. FEB3
2. MAR3
Answer Back
Enter a contract or exchange
rate option and press[Send].
The system will prompt you
with the next set of menus
asking you to enter the trigger
value. Press[Answer] to
navigate to the next menu.
123
182
Message:
1
Send Back
123
182
Message:
1299
Send Back
Enter the trigger value and
press [Send].
Press
[Answer]
------
Service reply
------
Trigger has been
set.
category:wm
contract: FEB3
Answer Back
In this example a white maize
(wm) trigger has been set to
the value of 1299. Triggers for
any other commodity and
exchange rate values can be
set in the same manner.
All other commodity and exchange
rate values can be set in the same
manner as the example.
NOTE
CAUTIO
N
Commodity price trigger must be
entered in Rand. Exchange rate
triggers must be entered as cents
(836=8.36).
Triggers
can be set from any of the commodity or exchange rate menus. To
set a trigger simply press [Answer] [08] and [Send]. The menu from where
the set trigger option was called will determine the Set Trigger menu. The
example shows that the Set Trigger option was selected from white maize
menu.
Scroll
Scroll
[Scroll]

SenwesMobile–Users’ Manual v1.4 Page 8of 15
How can I view a summary of
my triggers?
The system allows for the creation of more than one trigger. To view a summary of
triggers select the “View Triggers” option from any commodity or exchange rate menu
[Answer] [09] and [Send].
------
Service reply
------
MAR3max1000.0
MAR3 min 950.0
Answer Back
Trigger
summary
A list of the 12 latest triggers will be
displayed. The triggers shown
depend on the original menu where
the option was selected.
If
the “View Triggers” menu were
selected from the exchange rate
menu, a summary of exchange rate
triggerswould havebeen displayed.
NOTE
To quickly navigate to the menu of choice
do the following-[Answer]
[1,2,3,4,5,6,7,8,9 to 13] and [Send].
The option to exit the system is not
always displayed but can be used at any
time to quit the system.-[Answer] [0] and
[Send].
È
Tip
View triggers through the
Internet
Triggers can be manipulated via the Internet.
Visit http://www.senwestrigger.120.co.za. You must be registered user of
SenwesMobile to be able to gain access to trigger information via the Internet.

SenwesMobile–Users’ Manual v1.4 Page 9of 15
To exit the system press
[Answer] [0] and[Send].
How do I leave the system
(quit)?
123
182
Message:
0
Send Back
Can I customise the system to
my own needs?
Customisation is done by setting the start menu. From
any menu press[Answer] [12] and [Send]. The
customisation menu will be displayed.
123
182
information call
[phone]
Back
123
182
Brought to you by
Senwes. Powered
by Flash Media
Group. For
Back
The following screen will be
displayed if you have logged
out of the system in the
correct fashion.
[Scroll]
Ensure that you always exit the system after a
session. [Answer] [0] and[Send]. A session not
closed will be treated as an active session.
È
Tip
[Scroll]
When you use the system for the first time you will get the default
menu will
appear on the screen. This can beexc (exchange rate) or any of the
commodity menus such aswm (white maize).
To customise your startup menu, follow the next steps-
Any one of the options 1 to 11 can be saved as startup menu.
------
Service reply
------
9. CBT SOY
10. KS WH
11. InUitPar
0. Exit
Answer Back
------
Service reply
------
5. SOY
6. EX
7. CBT CORN
8. CBTWH
Answer Back
------
Service reply
------
1. WM
2. YM
3. WH
4. SU
Answer Back
----
--
Service reply
------
Choosewhich
category to always
display as first
menu:
Answer Back

SenwesMobile–Users’ Manual v1.4 Page 10 of 15
-----
+ 27832578744
----
hasexceeded
trigger of 8.543
set on 16:08:11
Price: 8.545
Answer Back
123
182
Message:
1
Send Back
Enter [1] and press[Send].
A response with the selecte
d
menu will be displayed.
This example shows that white
maize has been selected and
installedas startupmenu.
How will the system respond to a
trigger alert?
-----
+ 27832578744
----
Fri Jan 31 16:13:27
SAST 2003
SenwesTrigger:
exc Dollar price
Answer Back
You will receive a
SMS
as trigger alert with information
regarding the trigger level and current price.
Exchange rate trigger.
------
Service reply
------
Your first menu
will be: wm
*. Main menu
0. Exit
Answer Back
The selection can be changed
whenever you wish to do so,
not only when you first use the
system.
È
Tip
Save the number (SENWES)
*120*736937#
as a speed dial in your phone.
È
Tip
CAUTION
The following can cause SMS
reception failures either delaying or
inhibiting the reception of SMS’s-
•Cell phone not configured
to receive SMS’s.
•SIM card memory full.
•Weak signal.
The example displays a sample of an exchange
rate trigger. The following are displayed-
•current date
•exchange rate or commodity
•minimumormaximum
•trigger level
•date trigger was set
•current price (Rand)
[Scroll]

SenwesMobile–Users’ Manual v1.4 Page 11 of 15
-----
+ 27832578744
----
Price: 1289.0
Answer Back
-----
+ 27832578744
----
fallenbelow
trigger of 1290 set
on 2003-02-06
10:49:35.
Answer Back
-----
+ 27832578744
----
exceededtrigger
of 1279.0 set on
2003-02-0513:11:49
Price: 1280
Answer Back
-----
+ 27832578744
----
has fallen below
trigger of 8.52 set
on 15:58:06
Price: 8.5124
Answer Back
-----
+ 27832578744
----
Fri Jan 31 17:41:21
SAST 2003
SenwesTrigger:
exc Dollar price
Answer Back
-----
+ 27832578744
----
Thu Feb 06 10:42:33
SAST 2003
SenwesTrigger:
wm FEB3 price has
Answer Back
-----
+ 27832578744
----
Thu Feb 06 10:50:09
SAST 2003
SenwesTrigger:
wm FEB3 price has
Answer Back
Commodity trigger -Maximum.
Commodity trigger -Minimum.
The trigger screen also displays information on what
caused the trigger, maximum or minimum-
•“exceeded"-maximum
•“fallen below” -minimum
NOTE
[Scroll]
[Scroll]
A few SMS trigger samples.
Exchange rate trigger-minimum
[Scroll]

SenwesMobile–Users’ Manual v1.4 Page 12 of 15
GrainStock
W
hat is
Gra
inStock
?
The Grain producer has now got instant access to his
Silo
or
Grain
stock information.
Contact SENWES if you are interested in the functionality.
To accessSilo information from any screen do the following-[Answer] [11] and [Send].
GrainStock
The sample screen displays the following
information-
•2005-04-18 –Date last updated
•400133 –Client number
•G193 –Silo (Bothaville silo 3)
•YM1 D–Grain type
•55.045 -Tonnage
Remember always to
[scroll]
to reveal all
content. In certain instances a
05.More will appear at the bottom of the screen. If you press[Answer]
[05] and[Send] has the same effect asPage Downon a computer. The
rest of the information will be transferred to the phone. This is a dynamic
feature and will only appear if the information you requested is more than
160 characters.
[Scroll]
It is important to notice that you are not by
default enabled for the service.
SENWES must be informed if you are
interested in monitoring GrainStock levels.
NOTE
------
Service reply
------
3. G233 WM1 D 9.255
4. G222 WM3 D 53.425
Answer Back
------
Service reply
------
2005-04-18
400133
1. G193 YM1 D 55.045
2. G193 WM1 d 35.000
Answer Back
Import and Export parity
Import and Export parity can now be viewed via cell phone by pressing
-
[Answer] [12] and[Send].

SenwesMobile–Users’ Manual v1.4 Page 13 of 15
Navigation from the main menu
to GrainStock
123
182
Message:
*
Send Back
[Answer] [*]
and
[Send]
will
take you to the main menu.
Memorise the Main Menu
option numbers.
This will come in handy for quick navigation.
È
Tip
Main Menu
[Scroll]
[Answer] [11]
and
[Sen
d]
will
take you direct to theSilo
screen.
------
Service reply
------
I-G-USRa: 1050.64
I-G-ArgPa: 1244.64
U-G-ExRa: 388.22
Answer Back
------
Service reply
------
SENWES
2005-04-18
InUitPar:MAY5
I-W-USRa: 1313.87
Answer Back
Import and Export parity
The following information are displayed in the
samplescreens-
•2005-04-18 –Date last updated
•I–Import
•U-Export
•W–White maize
•G–Yellow maize
•USRa –USA to Randfontein
•ExRa –Export Randfontein
•ArgPa –Argentinato Paarl
[Scroll]
------
Service reply
------
13. Settings
14. Help
0. Exit
Answer Back
------
Service reply
------
9. CBOT SOY
10. KS WH
11. GrainStock
12. InUitPar
Answer Back
------
Service reply
------
5. SOY
6. EX
7. CBOT CORN
8. CBOT WH
Answer Back
------
Service reply
------
1. WM
2. YM
3. WH
4. SU
Answer Back

SenwesMobile–Users’ Manual v1.4 Page 14 of 15
Error messages
Error messages can be a big frustration if the cause is unknown.
SenwesMobile
, as any system, is not free of
such behaviour. Although everything possible is done to limit these problems, errors will occur. These
messages can be caused by either asystem problem or an action incorrectly executed.
Here are some samples of messages you might encounter.
T
his message is generated when the service you are
trying to access is unavailable due to one of the
following problems-
•Mobile network.
•Data network.
•Applicationserver.
•Incorrect access number supplied.
•Weak network coverage (signal).
Remedy:
•Make sure you have entered the correct
number.
•Check the phone’s signal level.
•If you are using short dial make sure the
number is still correct or in existence.
•Keep on trying at regular intervals.
------
Service reply
------
Service
temporarily
unavailable
Back
------
Service reply
------
Not Done
Back
This message is usually generated during n
ormal use
and is caused by the following-
•Communication loss with mobile network.
•Weak network coverage (signal).
Remedy:
•Check the phone’s signal level.
•Restart a session.
The message
old data!
appears on a normal screen
when data is older than 10 minutes. This is informative
and an indication that the data is old and not to be
relied on. This is caused by a loss of data feed.
------
Service reply
------
02-04 16:07
olddata!
lastwm
FEB3: 1200 –107
Answer Back
------
Service reply
------
Application not
running
Back
or

SenwesMobile–Users’ Manual v1.4 Page 15 of 15
Disclaimer:
FMG is not responsible for the data displayed.
This manual must be treated as reference. Menu appearances and layout will differ from
phone to phone. The layout in this manual was based on a Nokia 6610.
Application features and enhancements may change menus without any notice.
The latest manuals will always be available on the following websites-
http://www.flashmedia.co.za
http://www.senwes.co.za/senwesmobile/
Application timeout
message is
caused by the
following-
•Application unable to handle your request.
•Slow Mobile network traffic.
•Problem with application.
Remedy:
•Restart a session.
•Check the phone’s signal level.
------
Service reply
------
Application
timeout
Back
When a session is started
it keeps displaying
Requesting.
The problem is normally caused by-
•Weak network coverage (signal).
Remedy:
•Restart a session.
•Check the phone’s signal level.
Requesting
Cancel
CAUTION
A weak signal can cause various problems. Before accessing
the system, ensure that you have a strong signal by
observing the signal level indicator of your phone. A lot of
uncertainty and unwanted problems can be avoided if you
implement this strategy.
------
Service reply
------
Unknown
Application
Back
Unknown Application
message is caused by the
following-
•Incorrect service number used.
Remedy:
•MTN *198*2*736937#
•Vodacom -*120*736937#