Nokia 6500 Slide User manual

Vodafone Configuration Guide
Nokia 6500 Slide
Setting up Email
1. Click menu
2. Scroll to and select messaging
3. Scroll to and select E-mail mailbox
Note: If there are no e-mail accounts already set up you will get the message No e-mail
mailboxes is use. Create mailbox now? Select Yes
4. Select ok twice
5. Scroll to Create mbox. Settings
6. Select Mailbox name and enter a name for your account i.e. VF Mail
7. Scroll to and select my name enter your username for your email account and press
OK
8. At E-mail address select and enter your email address
and press OK
9. Scroll to incoming server type select ether imap or pop
10. Scroll to Login information and select
11. If IMAP4 was selected above, select IMAP4 authentication and select Off
12. At POP3 or IMAP4 user name enter your account username
and press OK
13. Scroll to POP3 or IMAP4 password select and enter your account password and press
OK, enter again to Verify it
14. press Back
15. Scroll to and select incoming mail Sett. Enter your incoming mail server address
and press OK
16. Scroll to and select port and enter for POP3 110 and 143 for IMAP and press OK
17. Scroll down to and select Use pref. Access pt and select No
18. Scroll down to and select POP3/IMAP4 access point
19. remain on proxy and select
20. scroll to and select enable
21. highlight and select proxy address, enter 212.183.137.012 press ok
22. scroll to and select proxy port, enter 8799 press ok
23. scroll to and select data bearer, and select packet data

Vodafone Configuration Guide
24. scroll to and select bearer settings
25. remain on packet data access point and select, enter
26. For contract internet
For PayT pp.vodafone.co.uk
27. Press ok
28. scroll to and select network type and select IPv4
29. scroll to and select authentication type, and select normal
30. scroll down and select user name enter web
31. scroll down and select password enter web
32. press back 3 times
33. Scroll to and select outgoing sett. (SMTP)
34. select Outgoing SMTP serv and enter your outgoing mail server address and press OK
35. Scroll to and select SMTP authentication and select off unless required by your email
account provider.
36. press back once
37. press Done