Nokia BH 600 - Headset - Over-the-ear User manual

Nokia Bluetooth Headset BH-600
9250102/1
2
2
1
4
3
5
7
6

8
10
9

ENGLISH
DECLARATION OF CONFORMITY
We, NOKIA CORPORATION declare under our
sole responsibility that the product HS-59W
is in conformity with the provisions of the
following Council Directive: 1999/5/EC. A
copy of the Declaration of Conformity can be
found at http://www.nokia.com/phones/
declaration_of_conformity/.
The crossed-out wheeled bin
means that within the European
Union the product must be taken
to separate collection at the
product end-of-life. Do not dispose
of these products as unsorted municipal
waste.
© 2006 Nokia. All rights reserved.
Reproduction, transfer, distribution or
storage of part or all of the contents in this
document in any form without the prior
written permission of Nokia is prohibited.
Nokia and Nokia Connecting People are
registered trademarks of Nokia Corporation.
Other product and company names
mentioned herein may be trademarks or
tradenames of their respective owners.
Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
Nokia operates a policy of continuous
development. Nokia reserves the right to
make changes and improvements to any of
the products described in this document
without prior notice.
Under no circumstances shall Nokia be
responsible for any loss of data or income or
any special, incidental, consequential or
indirect damages howsoever caused.
The contents of this document are provided
"as is". Except as required by applicable law,
no warranties of any kind, either express or
implied, including, but not limited to, the
implied warranties of merchantability and
fitness for a particular purpose, are made in
relation to the accuracy, reliability or
contents of this document. Nokia reserves
the right to revise this document or
withdraw it at any time without prior notice.
The availability of particular products may
vary by region. Please check with the Nokia
dealer nearest to you.

ENGLISH
Unauthorized changes or modifications to
this device may void the user's authority to
operate the equipment.
Export Controls
This device may contain commodities,
technology or software subject to export
laws and regulations from the US and other
countries. Diversion contrary to law is
prohibited.
Introduction
The Nokia Bluetooth Headset BH-600
allows you to make and receive calls
while on the move. You can use the
headset with compatible phones that
support Bluetooth wireless
technology.
Read this user guide carefully before
using the headset. Also read the user
guide for your phone, which provides
important safety and maintenance
information. Keep the headset out of
reach of small children.
Bluetooth wireless technology
Bluetooth wireless technology allows
you to connect compatible devices
without cables. A Bluetooth
connection does not require that the
phone and the headset be in line of
sight, but both devices should be
within 10 meters (30 feet) of each
other. Connections may be subject to
interference from obstructions, such
as walls, or other electronic devices.
The headset complies with the
Bluetooth Specification 2.0 that
supports the Headset Profile 1.1 and
Handsfree Profile 1.5. Check with the
manufacturers of other devices to
determine their compatibility with
this device.

ENGLISH
There may be restrictions on using
Bluetooth technology in some
locations. Check with your local
authorities or service provider.
Get started
The headset contains the following
parts shown on the title page:
multifunction key (1), green indicator
light (2), charging socket (3), volume
keys (4), earloop (5), and microphone
(6).
Before using the headset, you must
charge the battery and pair a
compatible phone with the headset.
Note: Parts of the headset are
magnetic. Metallic materials
may be attracted to the
headset. Do not place credit cards or
other magnetic storage media near the
headset, because information stored on
them may be erased.
Chargers
Check the model number of any charger
before using it with this device. The
headset is intended for use with the
AC-3, AC-4, and DC-4 chargers.
Warning: Use only chargers
approved by Nokia for use
with this particular
enhancement. The use of any other types
may invalidate any approval or warranty
and may be dangerous.
For availability of approved
enhancements, please check with your
dealer. When you disconnect the power
cord of any enhancement, grasp and pull
the plug, not the cord.

ENGLISH
Charge the battery
The headset has an internal,
nonremovable, rechargeable battery.
Do not attempt to remove the battery
from the device, as you may damage
the device.
1. Connect the charger to a wall
outlet.
2. Connect the charger to the headset
(7). The indicator light is
continuously displayed during
charging. If charging does not
start, disconnect the charger, plug
it in again, and retry. Charging the
battery fully may take up to
2hours.
3. When the battery is fully charged,
the indicator light turns off.
Disconnect the charger from the
headset and the wall outlet.
The fully charged battery has power
for up to 7 hours of talk-time or up to
220hours of standby time. However,
the talk and standby times may vary
when used with different mobile
phones or other compatible Bluetooth
devices, usage settings, usage styles,
and environments.
When battery power is low, the
indicator light flashes fast.
Switch the headset on or off
To switch on, press and hold the
multifunction key until the indicator
light turns on and the headset beeps.
To switch off, press and hold the
multifunction key until the indicator
light rapidly flashes four times and
then turns off.
Pair the headset
1. When the headset is off, press and
hold the multifunction key until
the indicator light is continuously
displayed.
2. Switch on your compatible phone.

ENGLISH
3. Activate the Bluetooth feature on
the phone, and set the phone to
search for Bluetooth devices.
4. Select the headset from the list of
found devices.
5. Enter the passcode 0000 to pair
and connect the headset to your
phone. In some phones you may
need to make the connection
separately after pairing. You only
need to pair the headset with your
phone once.
If the pairing is successful, the
indicator light starts to flash slowly,
and the headset appears in the phone
menu where you can view the
currently paired Bluetooth devices.
The headset is now ready for use.
Basic use
Wear the headset
Slide the earloop behind your ear (8),
and push or pull the earloop to set its
length. Point the headset toward your
mouth. To use the headset on the left
ear, gently flip (9) and rotate the
earloop (10).
Call handling
To make a call, use your phone in the
normal way when the headset is
connected to your phone.
If your phone supports last number
redialing with this device, press the
multifunction key when no call is in
progress.
If your phone supports voice dialing
with this device, briefly press the

ENGLISH
multifunction key when no call in
progress, and proceed as described in
the user guide of your phone.
To answer or end a call, briefly press
the multifunction key. If you do not
want to answer the call, press the
multifunction key.
To answer another call during a call
(and put the active call on hold) or
switch between the two calls, press
the multifunction key.
Adjust the earphone volume
Press the plus key (+ ) to increase or
the minus key (-) to decrease the
volume.
Mute the microphone
Press both volume keys at the same
time during a call. When muted, the
headset beeps at regular intervals.
To unmute the microphone, press both
volume keys at the same time, or end
the call.
Battery information
Your device is powered by a rechargeable
battery. The battery can be charged and
discharged hundreds of times, but it will
eventually wear out. Recharge your
battery only with Nokia approved
chargers designated for this device.
Unplug the charger from the electrical
plug and the device when not in use. Do
not leave a fully charged battery
connected to a charger, since
overcharging may shorten its lifetime. If
left unused, a fully charged battery will
lose its charge over time.
Never use any charger that is damaged.
Leaving the device in hot or cold places,
such as in a closed car in summer or
winter conditions, will reduce the
capacity and lifetime of the battery.

ENGLISH
Always try to keep the battery between
15°C and 25°C (59°F and 77°F). A device
with a hot or cold battery may not work
temporarily, even when the battery is
fully charged. Battery performance is
particularly limited in temperatures well
below freezing.
Do not dispose of batteries in a fire as
they may explode. Batteries may also
explode if damaged. Dispose of batteries
according to local regulations. Please
recycle when possible. Do not dispose as
household waste.
Care and maintenance
Your device is a product of superior
design and craftsmanship and should be
treated with care. The suggestions below
will help you protect your warranty
coverage.
• Keep all accessories and
enhancements out of the reach of
small children.
• Keep the device dry. Precipitation,
humidity, and all types of liquids or
moisture can contain minerals that
will corrode electronic circuits. If your
device does get wet, allow it to dry
completely.
• Do not use or store the device in
dusty, dirty areas. Its moving parts
and electronic components can be
damaged.
• Do not store the device in hot areas.
High temperatures can shorten the
life of electronic devices, damage
batteries, and warp or melt certain
plastics.
• Do not store the device in cold areas.
When the device returns to its normal
temperature, moisture can form
inside the device and damage
electronic circuit boards.
• Do not attempt to open the device.

ENGLISH
• Do not drop, knock, or shake the
device. Rough handling can break
internal circuit boards and fine
mechanics.
• Do not use harsh chemicals, cleaning
solvents, or strong detergents to
clean the device.
• Do not paint the device. Paint can
clog the moving parts and prevent
proper operation.
All of the above suggestions apply
equally to your device, battery, charger,
or any enhancement. If any device is not
working properly, take it to the nearest
authorized service facility for service.