Nokia Reaction User manual

Nokia Reaction Bluetooth Headset User Guide
Issue 1.0

Contents
Introduction 3
About your headset 3
About Bluetooth connectivity 3
Get started 4
Keys and parts 4
Wear the headset 4
Switch the headset on or off 6
Use your headset for the first time 6
Charge the battery 6
Pair the headset 8
Pair your headset with your phone 8
Pair with a phone with NFC 8
Pair the headset with another phone 9
Make calls 9
Make and receive calls 9
Adjust the volume 10
Handle calls from two phones 11
Update the software of your
headset 12
Change the language of the voice
guidance 12
Setting 12
Switch the voice guidance or ear
detection off 12
Restore factory settings 12
Support 12
Product and safety information 13
2

Introduction
About your headset
With the Nokia Reaction Bluetooth Headset, you can make and receive calls hands-
free. You can pair with 4 compatible phones or other devices, and can connect to 2
at the same time.
The surface of this product is nickel-free.
Warning:
This product may contain small parts. Keep them out of the reach of small children.
Parts of the product are magnetic. Metallic materials may be attracted to the product.
Do not place credit cards or other magnetic storage media near the product, because
information stored on them may be erased.
Read this user guide carefully before using the product. Also, read the user guide for
the device that you connect to the product.
About Bluetooth connectivity
You can use Bluetooth to make a wireless connection to other compatible devices,
such as mobile phones.
Devices do not need to be in direct line-of-sight, but they must be within 10 meters
(33 feet) of each other. The connection may be affected by obstructions such as walls
or other electronic devices.
This device is compliant with Bluetooth Specification 3.0 supporting the following
profiles: hands-free (1.6), headset (1.2), advanced audio distribution (1.2), and audio/
3

video remote control (1.4) . Check with the manufacturers of other devices to
determine their compatibility with this device.
Get started
Keys and parts
1Earloop (optional)
2Call key
3Micro-USB connector
4Earpad
5Earpiece
6NFC area
7Power switch
8Microphone
9Volume down
10 Battery indicator
11 Volume up
12 Menu key
Wear the headset
Put the headset to your ear so that the hole in the earpad is directly toward your ear
canal and the hoop of the earpad is diagonally toward the top of your head. Point the
headset toward your mouth.
4

Your headset comes with several different-sized earpads – select the one that fits
the best, and is the most comfortable for your ear.
Change the earplug
Pull the current earpad from the earpiece, then push the new earpad into place.
Tip: If you'd like the headset to be more firmly against your ear, attach the optional
earloop to the earpiece, then slip the earloop over your ear.
When you're not using your headset, keep it in the carrying clip – the headset switches
off automatically. You can attach the clip to your clothing.
5

Switch the headset on or off
Switch on
Slide the power switch toward the earpiece.
Tip: The headset goes into power save mode when you're not wearing it. When you
put the headset back to your ear, it reconnects to your phone.
Switch off
Slide the power switch away from the earpiece, or put the headset into the carrying
clip.
Use your headset for the first time
Voice prompts guide you through setting up your headset when you switch the
headset on for the first time.
1 Switch the headset on.
2 Put the headset to your ear.
3 Follow the voice prompts to pair the headset with your phone.
Tip: You can change the language of the voice prompts with the Nokia accessory
software updater app.
Charge the battery
The headset has been charged at the factory, but you may want to recharge it before
you switch the headset on for the first time.
6

Warning:
Use only chargers approved by Nokia for use with this particular model. The use of
any other types may invalidate any approval or warranty, and may be dangerous. Use
of unapproved chargers may present a risk of fire, explosion, or other hazard.
1 Put the headset in the charging adapter.
2 Connect the adapter to a USB port on your computer, or to a compatible charger.
The lights in the battery indicator blink slowly when your headset is being charged.
When the indicator lights stop blinking, the battery is fully charged.
The fully charged battery has power for up to 6 hours of talk time. The standby time
is up to 12–15 days. When in the carrying clip, the standby time is up to 3 months.
When the battery charge is low, the frame around the battery indicator blinks.
Check the battery level
Make sure the headset is on, then swipe your finger over the battery indicator. The
three white indicator lights show the battery level. If the headset is in your ear, a voice
prompt tells you the remaining talk time.
Tip: You can charge your headset also without the charging adapter. Use a compatible
USB cable to connect the headset to your computer or a charger.
When you unplug a charger, hold and pull the plug, not the cord.
7

Pair the headset
Pair your headset with your phone
Before using the headset, you must pair and connect it to a compatible Bluetooth
device, such as your phone. You can't pair the headset with a phone during a call.
Follow these instructions when you are pairing your first device, or if you have
restored the factory settings.
1 On your phone, switch Bluetooth on.
2 Switch the headset on, then put the headset to your ear. You are guided with voice
prompts.
3 If your headset is not shown on your phone, search for new devices, then select
the headset.
4 If asked for a passcode on your phone, type in 0000.
Set your headset as a trusted device to make it connect to your phone automatically.
With some phones, you may need to make the connection separately after pairing.
Pair with a phone with NFC
If your phone supports Near Field Communication (NFC), it is easy to pair your
headset.
8

1 On your phone, make sure that NFC is on and the phone keys and screen are
unlocked.
2 Switch the headset on.
3 Tap the NFC area of the headset with the NFC area of the phone.
Set your headset as a trusted device to make it connect to your phone automatically.
Pair the headset with another phone
After pairing your headset with your phone, you can pair it with up to 3 other phones.
The headset can be connected to 2 phones at the same time, so you can make and
receive calls on, for example, your personal and your work phone at the same time.
1 On the phone you want to pair with, switch Bluetooth on.
2 Switch the headset on, then put it to your ear.
3 Press and hold the menu key, then follow the voice prompts.
As well as pairing with a phone, you can also switch ear detection and voice guidance
off, and restore factory settings.
Make calls
Make and receive calls
Make sure your headset is on, and that your headset is a trusted device in your phone
Bluetooth settings – so the headset connects to your phone automatically when
needed.
Most features can be handled with the call key on your headset.
Make a call
Put the headset to your ear, then make a call in the normal way.
Answer a call
Put the headset to your ear.
9

If the headset is already in your ear, press .
End a call
Press .
Decline a call
Decline the call as you normally would on your phone.
If the headset is in your ear, press twice.
Mute or unmute a call
Press the menu key on the headset.
Switch a call from your phone to your headset
Put the headset to your ear.
Switch a call from your headset to your phone
Take the headset from your ear.
When no call is in progress, you can redial the number you last called or use your voice
to make a call, if your phone supports these features with the headset.
Redial the last called number
Press twice.
Use voice dialing
Press and hold , then follow the instructions in the phone user guide.
Adjust the volume
Your headset listens to the background noise, and changes the volume automatically.
10