Nokia BH 600 - Headset - Over-the-ear User manual

Nokia Bluetooth Headset BH-600
9250609/1
2
2
1
4
3
5
7
6

8
10
9

DECLARATION OF CONFORMITY
We, NOKIA CORPORATION declare under our sole responsibility that the
product HS-59W is in conformity with the provisions of the following Council
Directive: 1999/5/EC. A copy of the Declaration of Conformity can be found at
http://www.nokia.com/phones/declaration_of_conformity/.
The crossed-out wheeled bin means that within the European Union the product must
be taken to separate collection at the product end-of-life. Do not dispose of these
products as unsorted municipal waste.
© 2006 Nokia. All rights reserved.
Reproduction, transfer, distribution or storage of part or all of the contents in this document
in any form without the prior written permission of Nokia is prohibited.
Nokia and Nokia Connecting People are registered trademarks of Nokia Corporation. Other
product and company names mentioned herein may be trademarks or tradenames of their
respective owners.
Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Nokia operates a policy of continuous development. Nokia reserves the right to make changes
and improvements to any of the products described in this document without prior notice.
Under no circumstances shall Nokia be responsible for any loss of data or income or any
special, incidental, consequential or indirect damages howsoever caused.
The contents of this document are provided "as is". Except as required by applicable law, no
warranties of any kind, either express or implied, including, but not limited to, the implied
warranties of merchantability and fitness for a particular purpose, are made in relation to
the accuracy, reliability or contents of this document. Nokia reserves the right to revise this
document or withdraw it at any time without prior notice.
The availability of particular products may vary by region. Please check with the Nokia dealer
nearest to you.

Unauthorized changes or modifications to this device may void the user's authority to operate
the equipment.
Export Controls
This device may contain commodities, technology or software subject to export laws and
regulations from the US and other countries. Diversion contrary to law is prohibited.

5
Contents
1. Introduction ......................... 6
Bluetooth wireless technology .......... 6
2. Get started............................ 7
Chargers ................................................... 7
Charge the battery ................................ 7
Switch the headset on or off ............. 8
Pair the headset ..................................... 8
3. Basic use............................. 10
Wear the headset ................................ 10
Call handling ........................................ 10
Adjust the earphone volume ........... 10
Mute the microphone........................ 11
4. Battery information ........... 12
Care and maintenance........... 13
FCC notice .............................. 15

Introduction
6
1. Introduction
The Nokia Bluetooth Headset BH-600 allows you to make and receive
calls while on the move. You can use the headset with compatible
phones that support Bluetooth wireless technology.
Read this user guide carefully before using the headset. Also read the
user guide for your phone, which provides important safety and
maintenance information. Keep the headset out of reach of small
children.
■Bluetooth wireless technology
Bluetooth wireless technology allows you to connect compatible devices
without cables. A Bluetooth connection does not require that the phone
and the headset be in line of sight, but both devices should be within
10 meters (30 feet) of each other. Connections may be subject to
interference from obstructions, such as walls, or other electronic devices.
The headset complies with the Bluetooth Specification 2.0 that supports
the Headset Profile 1.1 and Handsfree Profile 1.5. Check with the
manufacturers of other devices to determine their compatibility with
this device.
There may be restrictions on using Bluetooth technology in some
locations. Check with your local authorities or service provider.

7
Get started
2. Get started
The headset contains the following parts shown on the title page:
multifunction key (1), green indicator light (2), charging socket (3),
volume keys (4), earloop (5), and microphone (6).
Before using the headset, you must charge the battery and pair a
compatible phone with the headset.
Note: Parts of the headset are magnetic. Metallic materials may be
attracted to the headset. Do not place credit cards or other magnetic
storage media near the headset, because information stored on them
may be erased.
■Chargers
Check the model number of any charger before using it with this device.
The headset is intended for use with the AC-3, AC-4, and DC-4 chargers.
Warning: Use only chargers approved by Nokia for use with this
particular enhancement. The use of any other types may invalidate
any approval or warranty and may be dangerous.
For availability of approved enhancements, please check with your dealer.
When you disconnect the power cord of any enhancement, grasp and pull
the plug, not the cord.
■Charge the battery
The headset has an internal, nonremovable, rechargeable battery. Do not
attempt to remove the battery from the device, as you may damage the
device.

Get started
8
1. Connect the charger to a wall outlet.
2. Connect the charger to the headset (7). The indicator light is
continuously displayed during charging. If charging does not start,
disconnect the charger, plug it in again, and retry. Charging the
battery fully may take up to 2 hours.
3. When the battery is fully charged, the indicator light turns off.
Disconnect the charger from the headset and the wall outlet.
The fully charged battery has power for up to 7 hours of talk-time or up to
220 hours of standby time. However, the talk and standby times may vary
when used with different mobile phones or other compatible Bluetooth
devices, usage settings, usage styles, and environments.
When battery power is low, the indicator light flashes fast.
■Switch the headset on or off
To switch on, press and hold the multifunction key until the indicator
light turns on and the headset beeps.
To switch off, press and hold the multifunction key until the indicator
light rapidly flashes four times and then turns off.
■Pair the headset
1. When the headset is off, press and hold the multifunction key until
the indicator light is continuously displayed.
2. Switch on your compatible phone.

9
Get started
3. Activate the Bluetooth feature on the phone, and set the phone to
search for Bluetooth devices.
4. Select the headset from the list of found devices.
5. Enter the passcode 0000 to pair and connect the headset to your
phone. In some phones you may need to make the connection
separately after pairing. You only need to pair the headset with your
phone once.
If the pairing is successful, the indicator light starts to flash slowly, and
the headset appears in the phone menu where you can view the currently
paired Bluetooth devices.
The headset is now ready for use.

Basic use
10
3. Basic use
■Wear the headset
Slide the earloop behind your ear (8), and push or pull the earloop to set
its length. Point the headset toward your mouth. To use the headset on
the left ear, gently flip (9) and rotate the earloop (10).
■Call handling
To make a call, use your phone in the normal way when the headset is
connected to your phone.
If your phone supports last number redialing with this device, press the
multifunction key when no call is in progress.
If your phone supports voice dialing with this device, briefly press the
multifunction key when no call in progress, and proceed as described in
the user guide of your phone.
To answer or end a call, briefly press the multifunction key. If you do not
want to answer the call, press the multifunction key.
To answer another call during a call (and put the active call on hold) or
switch between the two calls, press the multifunction key.
■Adjust the earphone volume
Press the plus key (+ ) to increase or the minus key (-) to decrease the
volume.