Nokia NSM-1 Series Installation instructions

NSM–1 Series Transceivers
PAMS Technical Documentation
Original 10/98
Disassembly &
Troubleshooting
Instructions

PAMS
Technical Documentation
NSM–1
Disassembly & Troubleshooting Instructions
Page 2 Original 10/98
CONTENTS
Page No
Disassembly 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Trouble Shooting 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Introduction 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

PAMS
Technical Documentation NSM–1
Disassembly & Troubleshooting Instructions
Page 3
Original 10/98
Disassembly
Remove battery
Remove dust cap by finger nail
Remove back cover
screws (4 pcs).
NOTE!
When assembling the
B cover screws, use
17 Ncm torque.
Turn around.
Remove UI module
screws (2 pcs)
Carefully remove A–cover.
Keymat, powerkeymat and
speaker will follow.
Note snap fixings !

PAMS
Technical Documentation
NSM–1
Disassembly & Troubleshooting Instructions
Page 4 Original 10/98
Remove UI–module and frame.
NOTE the snap fittings holding the
frame and B–cover together.
When assembling the phone be sure
to assemble the snaps properly.
Remove engine
module
Remove antenna
by pulling it
straight out.
Remove
microphone

PAMS
Technical Documentation NSM–1
Disassembly & Troubleshooting Instructions
Page 5
Original 10/98
Trouble Shooting
Introduction
Contents of troubleshooting is to be added.

PAMS
Technical Documentation
NSM–1
Disassembly & Troubleshooting Instructions
Page 6 Original 10/98
This page intentionally left blank.