Nordson EFD HP Series User manual

USER’S GUIDE
Series
•
HP3cc: 7023590
•
HP5cc: 7015289
•
HP10cc: 7012598

flange
alignment
Setup and Operation
Step 1.
Remove reservoir
retainer
Step 2.
Install dispensing tip on syringe
barrel. Insert filled syringe barrel
into retainer and align flange with
slot asshown.
reservoir
retainer
air
cylinder plunger
Nordson EFD syringe
barrel dispensing tip
dispensing tip
IMPORTANT: Confirm that a piston
is between the fluid and the plunger.

Step 3.
Install retainer and rotate clockwise to
secure. Connect HP to EFD air-powered
dispenser. Insert air quick-connect into
air outlet and turn clockwise to lock.
quick-connect
tip retaining
cap
window
Note: Refer to Nordson EFD dispenser operating instructions to
control deposit size with time and pressure.
Do not reuse syringe barrels!
Wipe plunger clean (if necessary) before installing a new reservoir.
Changing Reservoirs
When a syringe barrel isempty, the
window in the air cylinder will turn red.
Remove syringe barrel retainer. Then,
remove empty syringe barrel and discard.
Changing Tips
Remove tip retaining cap and invert.
Align slot with wingson dispensing tip.
Turn tip retaining cap counterclockwise
to remove tip. Attach a new tip and
tighten tip retaining cap securely.
Setup and Operation

U-cup (Buna-N)
Piston and shaft includes
U-cup (Buna-N)
Drive plunger
If the HP should cease to operate, service of the piston
U-cup and shaft bushing may be required.
Please follow procedure below:
1.Remove air cylinder cap.
2.Remove drive plunger.
3.Remove piston and shaft assembly. Replace piston
U-cup and lubricate lightly with O-ring grease.
4.Press shaft bushing out from bottom of cylinder
toward piston chamber. Replace with new bushing.
5.Install piston assembly and reinstall the air cylinder
cap and drive plunger.
For Nordson EFD sales and service in over
30 countries, contact Nordson EFD or go to
www.nordsonefd.com
East Providence, RI USA
USA & Canada: 800.556.3484;
+1.401.431.7000
[email protected]
Dunstable, Bedfordshire, UK
0800 585733;
[phone]
Ireland 00800 8272 9444
[email protected]
China: [phone]
[email protected]
Singapore: [phone]
[email protected]
The Wave Design is a trademark of Nordson Corporation.
©2010 Nordson Corporation
HP-MAN-01 7026512 (MMR # 5335) v042210
Drive Plungers Piston & Shift Piston Seal
HP3cc 7015986 7018915 7015985
HP5cc 7015987 7015984 7015985
HP10cc 7015988 7018932 7018937
Troubleshooting & Parts List