Nortel NN46205-310 User manual

Nortel Ethernet Routing Switch 8600
Quick Start
Release: 5.0
Document Revision: 02.01
www.nortel.com
NN46205-310 321749-B Rev 01
.

Nortel Ethernet Routing Switch 8600
Release: 5.0
Publication: NN46205-310
Document status: Standard
Document release date: 30 May 2008
Copyright © 2008 Nortel Networks
All Rights Reserved.
Printed in Canada, India, and the United States of America
LEGAL NOTICE
While the information in this document is believed to be accurate and reliable, except as otherwise expressly
agreed to in writing NORTEL PROVIDES THIS DOCUMENT "AS IS" WITHOUT WARRANTY OR CONDITION OF
ANY KIND, EITHER EXPRESS OR IMPLIED. The information and/or products described in this document are
subject to change without notice.
Nortel, the Nortel logo, the Globemark, and Passport are trademarks of Nortel Networks.
All other trademarks are the property of their respective owners.
ATTENTION
For information about the regulatory and safety precautions, read "Regulatory messages and safety
precautions" in this guide.
For information about the software license, read "Software license" in this guide.
For a list of safety messages used in this guide and their translations, see "Translations of safety
messages".
.

3
.
Contents
Regulatory Information and Safety Precautions 5
Software license 17
New in this release 21
Features 21
Other changes 21
Connecting the modem using the CLI 22
Connecting the modem using the NNCLI 22
Setting the system date and time using the CLI 22
Setting the system date and time using the NNCLI 22
Changing passwords using the CLI 22
Changing passwords using the NNCLI 22
Introduction 23
Installation preparation 25
Ethernet Routing Switch 8600 slots 25
DC power supply accessories 26
Safety precautions 27
Personal safety 27
Installation 31
Unpacking the chassis 32
Removing a power filler panel 33
Installing an Ethernet Routing Switch 8003, 8006, or 8010 chassis into a rack 34
Installing the 8010co chassis in a 19-inch two-post rack 36
Installing the 8003, 8006, and 8010 chassis cable guides 37
Installing the top cable-management bracket 38
Procedure job aid: Installing the cable-management brackets 39
Installing the side cable-management brackets 39
Grounding the 8010co chassis 40
Procedure job aid: Grounding the 8010co chassis 41
Installing a module 41
Procedure job aid: Installing a module 43
Installing AC power modules 43
Nortel Ethernet Routing Switch 8600
Quick Start
NN46205-310 02.01 Standard
30 May 2008
Copyright © 2008 Nortel Networks
.

4
Installing DC power modules 44
Cable preparation 49
Installing a breaker interface panel 49
Installing a PCMCIA software card 49
Starting the system 49
Turning on AC power supplies 49
Turning on DC power supplies 50
LED power supply 51
Verifying a successful installation 51
Configuration 53
Connecting a modem using the CLI 53
Connecting a modem using the NNCLI 56
Connecting a VT-100 terminal or PC for local access 58
Setting system date and time using the CLI 59
Procedure job aid: config setdate command sample output 59
Setting system date and time using the NNCLI 59
Procedure job aid: clock set command output 59
Changing passwords using the CLI 60
Changing passwords using the NNCLI 63
Configuring the system using the setup utility 65
Procedure job aid: Setup Utility prompt descriptions 66
Translation of safety messages 69
Fan tray safety warning message 69
Preventing back injury warning statement 70
Preventing electrical shock warning statement 72
Preventing hand injury warning statement 73
Safety danger statement 74
Injury to eye warning statement 75
Safety practices and the hazards danger statement 77
Safety practices and the hazards danger statement 78
Preventing electric shock danger statement 80
Nortel Ethernet Routing Switch 8600
Quick Start
NN46205-310 02.01 Standard
30 May 2008
Copyright © 2008 Nortel Networks
.

5
.
Regulatory Information and Safety
Precautions
Read the information in this section to learn about regulatory conformities
and compliances.
International Regulatory Statements of Conformity
This is to certify that the Nortel 8000 Series chassis and components
installed within the chassis were evaluated to the international regulatory
standards for electromagnetic compliance (EMC) and safety and were
found to have met the requirements for the following international
standards:
•EMC—Electromagnetic Emissions—CISPR 22, Class A
•EMC—Electromagnetic Immunity—CISPR 24
•Electrical Safety—IEC 60950, with CB member national deviations
Further, the equipment has been certified as compliant with the national
standards as detailed in the following sections.
National Electromagnetic Compliance (EMC) Statements of
Compliance
FCC Statement (USA only)
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the Federal Communications
Commission (FCC) rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy. If it is not installed and used in accordance
with the instruction manual, it may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case users will be required to take
whatever measures may be necessary to correct the interference at their
own expense.
Nortel Ethernet Routing Switch 8600
Quick Start
NN46205-310 02.01 Standard
30 May 2008
Copyright © 2008 Nortel Networks
.

6Regulatory Information and Safety Precautions
ICES Statement (Canada only)
Canadian Department of Communications Radio Interference
Regulations
This digital apparatus (8000 Series chassis and installed components)
does not exceed the Class A limits for radio-noise emissions from
digital apparatus as set out in the Radio Interference Regulations of the
Canadian Department of Communications.
Règlement sur le brouillage radioélectrique du ministère des
Communications
Cet appareil numérique (8000 Series chassis) respecte les limites de bruits
radioélectriques visant les appareils numériques de classe A prescrites
dans le Règlement sur le brouillage radioélectrique du ministère des
Communications du Canada.
CE Marking Statement (Europe only)
EN 55 022 Statements
This is to certify that the Nortel 8000 Series chassis and components
installed within the chassis are shielded against the generation of radio
interference in accordance with the application of Council Directive
2004/108/EC. Conformity is declared by the application of EN 55 022
Class A (CISPR 22).
CAUTION
This device is a Class A product. Operation of this equipment
in a residential area is likely to cause harmful interference, in
which case users are required to take appropriate measures
necessary to correct the interference at their own expense.
EN 55 024 Statement
This is to certify that the Nortel 8000 Series chassis is shielded against the
susceptibility to radio interference in accordance with the application of
Council Directive 2004/108/EC. Conformity is declared by the application
of EN 55 024 (CISPR 24).
EN 300386 Statement
The Ethernet Routing Switch 8000 Series chassis complies with the
requirements of EN 300386 V1.3.3 for emissions and for immunity for a
Class A device intended for use in either Telecommunications centre or
locations other than telecommunications centres given the performance
criteria as specified by the manufacturer.
EC Declaration of Conformity
This product conforms to the provisions of the R&TTE Directive
1999/5/EC.
Nortel Ethernet Routing Switch 8600
Quick Start
NN46205-310 02.01 Standard
30 May 2008
Copyright © 2008 Nortel Networks
.

National Electromagnetic Compliance (EMC) Statements of Compliance 7
European Union and European Free Trade Association (EFTA) Notice
All products labeled with the CE marking comply with R&TTE Directive
(1999/5/EEC) which includes the Electromagnetic Compliance (EMC)
Directive (2004/108/EC) and the Low Voltage Directive (2006/95/EC)
issued by the Commission of the European Community.
Compliance with these directives implies conformity to the following
European Norms (ENs). The equivalent international standards are listed
in parenthesis.
•EN 55022 (CISPR 22)–Electromagnetic Interference
•EN 55024 (IEC 61000-4-2, -3, -4, -5, -6, -8, -11)–Electromagnetic
Immunity
•EN 61000-3-2 (IEC 610000-3-2)–Power Line Harmonics
•EN 61000-3-3 (IEC 610000-3-3)–Power Line Flicker
VCCI Statement (Japan/Nippon only)
This is a Class A product based on the standard of the Voluntary Control
Council for Interference (VCCI) for information technology equipment.
If this equipment is used in a domestic environment, radio disturbance
may arise. When such trouble occurs, the user may be required to take
corrective actions.
BSMI Statement for 8010, 8006 and 8003 Chassis (Taiwan only)
This is a Class A product based on the standard of the Bureau of
Standards, Metrology and Inspection (BSMI) CNS 13438, Class A.
MIC Notice for 8010, 8006, 8003 Chassis (Republic of Korea only)
This device has been approved for use in Business applications only per
the Class A requirements of the Republic of Korea Ministry of Information
and Communications (MIC). This device may not be sold for use in a
non-business application.
Nortel Ethernet Routing Switch 8600
Quick Start
NN46205-310 02.01 Standard
30 May 2008
Copyright © 2008 Nortel Networks
.

8Regulatory Information and Safety Precautions
National Safety Statements of Compliance
CE Marking Statement (Europe only)
EN 60 950 Statement
This is to certify that the Nortel 8000 Series chassis and components
installed within the chassis are in compliance with the requirements of EN
60 950 in accordance with the Low Voltage Directive. Additional national
differences for all European Union countries have been evaluated for
compliance. Some components installed within the 8000 Series chassis
may use a nickel-metal hydride (NiMH) and/or lithium-ion battery. The
NiMH and lithium-ion batteries are long-life batteries, and it is very possible
that you will never need to replace them. However, should you need to
replace them, refer to the individual component manual for directions on
replacement and disposal of the battery.
NOM Statement 8010, 8006, and 8003 Chassis (Mexico only)
The following information is provided on the devices described in this
document in compliance with the safety requirements of the Norma Oficial
Méxicana (NOM):
Exporter: Nortel Networks, Inc.
4655 Great America Parkway
Santa Clara CA 95054 USA
Importer: Nortel Networks de México, S.A. de C.V.
Avenida Insurgentes Sur #1605
Piso 30, Oficina
Col. San Jose Insurgentes
Deleg-Benito Juarez
Nortel Ethernet Routing Switch 8600
Quick Start
NN46205-310 02.01 Standard
30 May 2008
Copyright © 2008 Nortel Networks
.

National Safety Statements of Compliance 9
México D.F. 03900
Tel: [phone]
Fax: [phone]
Input: Model 8003AC:
100-240 VAC, 50-60 Hz, 9 A maximum for each power
supply
Model 8004AC:
100-240 VAC, 50-60 Hz, 12-6 A maximum for each
power supply
Model 8005AC:
100-120 VAC, 50-60 Hz, 16 A maximum for each
power supply
200-240 VAC, 50-60 Hz, 8.5 A maximum for each
power supply
Model 8005DI AC:
100-120 VAC, 50-60 Hz, 16 A maximum for each
power supply
200-240 VAC, 50-60 Hz, 9.3 A maximum for each
power supply
Model 8004DC:
48-60 VDC, 29-23 A
Model 8005DC:
48-60 VDC, 42-34 A
Información NOM (unicamente para México)
La información siguiente se proporciona en el dispositivo o en los
dispositivos descritos en este documento, en cumplimiento con los
requisitos de la Norma Oficial Méxicana (NOM):
Exportador: Nortel Networks, Inc.
4655 Great America Parkway
Santa Clara, CA 95054 USA
Importador: Nortel Networks de México, S.A. de C.V.
Avenida Insurgentes Sur #1605
Piso 30, Oficina
Nortel Ethernet Routing Switch 8600
Quick Start
NN46205-310 02.01 Standard
30 May 2008
Copyright © 2008 Nortel Networks
.

10 Regulatory Information and Safety Precautions
Col. San Jose Insurgentes
Deleg-Benito Juarez
México D.F. 03900
Tel: [phone]
Fax: [phone]
Embarcar a: Model 8003AC:
100-240 VCA, 50-60 Hz, 9 A max. por fuente de poder
Model 8004AC:
100-240 VCA, 50-60 Hz, 12-6 A max. por fuente de
poder
Model 8005AC:
100-120 VCA, 50-60 Hz, 16 A max. por fuente de
poder
200-240 VCA, 50-60 Hz, 9.5 A max. por fuente de
poder
Model 8005DI AC:
100-120 VCA, 50-60 Hz, 16 A max por fuente de poder
200-240 VCA, 50-60 Hz, 9.3 A max por fuente de
poder
Model 8004DC:
-48 VCD, 29 A
Model 8005DC:
-48 VCD, 42 A
Denan Statement (Japan/Nippon only)
Nortel Ethernet Routing Switch 8600
Quick Start
NN46205-310 02.01 Standard
30 May 2008
Copyright © 2008 Nortel Networks
.