Norton CM 351 User manual

CM 351
OPERATING INTRUCTIONS

2

3
The undersigned manufacturer:
SAINT - GOBAIN ABRASIVES S.A.
190, BD. J. F. KENNEDY
L-4930 BASC ARAGE
Declares that the following new products here below:
Masonry Saws (Code)
• CM 351 2.2KW-1-230V (70184630312)
• CM 351 2.0KW-1-115V (70184630321)
s in conformity with the following Directives:
• "MACHINES" 2006/42/CE
• "LOW VOLTAGE" 2006/ 5/CE
• "ELECTROMAGNETIC COMPATIBILITY" 2006/ 5/CE
And the European standard:
• EN 12418 – Masonry and stone cutting-off machines – Safety
Pierre Mersch
Business Manager Machines Europe
Declaration of conformity

4

5
CM 351
OPERATING INSTRUCTIONS
TABLE OF CONTENTS
1 BASIC SAFETY INSTRUCTIONS 6
1.1 Symbols 6
1.2 Machine plate 6
1.3 Safety instructions for particular operating phases 6
2 MAC INES DESCRIPTION 7
2.1 Short description 7
2.2 Purpose of use 7
2.3 Layout 7
2.4 Technical data 8
2.5 Vibration emission declaration 8
3 ASSEMBLY AND COMMISSIONING 9
3.1 Feet assembly
3.2 Tool assembly
3.3 Electrical connections
3.4 Water cooling system
3.5 Starting the machine
4 TRANSPORT AND STORING 9
4.1 Securing for transport
4.2 Transport procedure
4.3 Storing of the machine 10
5 OPERATING T E MAC INE 10
5.1 Installation 10
5.2 Cutting methods 10
6 MAINTENANCE AND SERVICE 12
7 BREAKDOWN – CAUSES AND CURES 12
7.1 Breakdown-finding procedures 12
7.2 Trouble-shooting guide 12
7.3 Circuit diagram 13
7.4 Customer service 14