Nostalgia Electrics CCP-200 Quick guide

All products are trademarks of Nostalgia Products Group, LLC.
Worldwide design & utility patented or patents pending.
© 2009 Nostalgia Products Group, LLC.
www.nostalgiaelectrics.com
(rev. 08/21/09)

CCP-200
Old-Fashioned Movie-Time Popcorn Cart™
Instructions and Recipes
(French) Old-Fashioned Movie-Time Popcorn Cart™
Instructions et Recettes
(Spanish) Old-Fashioned Movie-Time Popcorn Cart™
Instrucciones y Recetas

ENGLISH
1
CONTENTS
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . 2
IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . 2
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . 3
PARTS & ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . 4
HOW TO OPERATE . . . . . . . . . . . . . . . . . . . . . . . 8
HELPFUL TIPS . . . . . . . . . . . . . . . . . . . . . . . . . 9
CLEANING & MAINTENANCE . . . . . . . . . . . . . . . . . 9
RECIPES . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
RETURNS & WARRANTY . . . . . . . . . . . . . . . . . . . . 10
SAFETY
Appliance Specifications:
120 Volts, 60 Hz
325 Watts, 2.71 Amps
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and
on your appliance. Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards
that can kill or hurt you and others.
All safety messages will follow the safety alert symbol.
All safety messages will tell you what the potential hazard
is, tell you how to reduce the chance of injury, and tell you
what can happen if the instructions are not followed.

ENGLISH
2
IMPORTANT PRECAUTIONS
NEVER immerse in water.1.
NEVER use near water.2.
NEVER use an abrasive sponge nor cloth.3.
NEVER use a scouring pad on the appliance.4.
NEVER leave appliance unattended while in use.5.
NEVER force Kettle in nor out of the brackets as this may cause gears6.
to become misaligned and appliance will not operate properly.
Unplug unit from outlet when not in use and during cleaning.7.
DO NOT operate this appliance with a damaged cord nor8.
plug, nor if the appliance ever malfunctions.
DO NOT clean any parts of this appliance in a dishwasher.9.
Keep out of reach of children.10.
This appliance is NOT A TOY.11.
Unsupervised young children and cognitively challenged12.
individuals should never operate this appliance.
Young children should be supervised while in proximity of the13.
appliance to ensure that they do not play with it.
IMPORTANT SAFEGUARDS
Basic safety precautions should always be followed when
using electrical appliances, including the following:
Read all instructions before operating this appliance.1.
Keep door of Main Unit closed while operating. Do not2.
touch Kettle while operating; it gets very HOT.
To protect against electrical shock do not immerse cord, plug3.
or any part of this appliance in water or other liquids.
Close supervision is necessary when any appliance is used near children.4.
Unplug from outlet when not in use, before removing parts and before cleaning.5.
DO NOT operate any appliance with a damaged cord nor plug,6.
nor if the appliance has been damaged in any manner. Return the
appliance to the nearest repair shop for examination or repair.
The manufacturer does not recommend the use of accessory7.
attachments. Use of accessory attachments may cause injuries.
DO NOT use outdoors.8.
Position the appliance as close to the outlet as possible9.
to prevent injury due to tripping over cord.
DO NOT leave Kettle motor running once popping has ceased.10.

ENGLISH
3
Extreme caution must be used when moving this appliance.11.
DO NOT use the appliance for other than its intended use.12.
An appliance that is plugged into an outlet should13.
not be left unattended while in operation.
Check Kettle for presence of foreign objects prior to use.14.
Make sure the Kettle is properly attached to brackets before15.
operating and that the motor plug is plugged into the Kettle.
A short power supply cord is provided to reduce the risk resulting16.
from becoming entangled or tripping over a long cord.
Longer detachable power supply cords can be used if care is exercised in their use.17.
The marked electrical rating of an extension cord should be at18.
least as great as the electrical rating of the appliance.
This appliance has a polarized plug (one blade is wider than19.
the other). To reduce the risk of electrical shock, this plug is
intended to fit into a polarized outlet only one way.
Save these instructions!20.
INTRODUCTION
Thank you for purchasing the OLD FASHIONED MOVIE TIME POPCORN
CART™, a product in Nostalgia Electrics’ Vintage Series™. This 48” tall
vendor-style popcorn cart will be the hit of every party. It pops up to two
quarts of hot, fresh, kettle cooked popcorn per batch. Providing a vintage
look and feel, reminiscent of silent movie houses and carnivals circa-early
1900’s, the OLD FASHIONED MOVIE TIME POPCORN CART™ is designed
for home use. It features a large, stainless steel kettle with a built-in stirring
system and kernel catcher to keep unpopped kernels out of each perfect
batch. There is a compartment in the base of the unit to store supplies, making
it easy to keep the cart well stocked and organized. The OLD FASHIONED
MOVIE TIME POPCORN CART™ has an easy-to-clean design and is
approved for commercial use. Its accessible height makes serving a snap.

ENGLISH
4
PARTS & ASSEMBLY
Hardware
#1 Screw (10mm) #2 Bolt (10mm) #3 Bolt (20mm) #4 Stud (65mm)
Qty. 4 Qty. 6 Qty. 4 Qty. 4
#5 Flat Washer #6 Nut Cap
Qty. 8 Qty. 6

ENGLISH
5
Assembly
(A) Main Unit (B) Kernel Measuring (C) Storage (D) Oil Measuring
Cup Compartment Spoon
(E) Push Handle (F) Axle Rod (G) Wheel (H) Wrench
(I) Base Support (J) Bottom Plate (K) Cross Bar (L) Leg Assembly
(M) Popcorn Scoop

ENGLISH
6
Assembly of Base Support
Push Handle (E) attaches onto the Storage1.
Compartment (C) using supplied #1 Screws.
Insert Cross Bar (K) into the square inserts on the inside of Base Support (I)2.
and secure from below with #2 Bolts. Insert the Leg Assembly (L) over the
protruding ends of the Base Support (I) and fasten #4 Studs and #6 Nut Cap.
Secure Bottom Plate (J) of the Storage Compartment (C) to Base3.
Support (I) using four #2 Bolts. Open Storage Compartment (C)
door to help support Bottom Plate (J) with your hand.
Assemble Base Support (I) into the bottom of the Storage4.
Compartment (C) and secure with #3 Bolts.

ENGLISH
7
Assembly of Wheels
Insert Axle Rod (F) into Base Support (I).1.
Put on #5 Flat Washer. Slide Wheel (G) into Axle Rod (F)2.
and add a second #5 Flat Washer.
Use Wrench (H) to tighten the #6 Nut Cup.3.
Add #5 Flat Washer, second Wheel (G), another #5 Flat Washer, and #6 Nut4.
Cap to the other side of the Axle Rod (F), following the directions above.
Use Wrench (H) to tighten the #6 Nut Cap.5.
Assembly of Main Unit
Place Main Unit (A) onto the top of the Storage Compartment (C).1.
Ensure that the two inserting pins at the bottom of the Main2.
Unit (A) line up correctly so that Main Unit (A) can be locked
under the beam of the Storage Compartment (C).
(H)
Wrench
(#6)
Nut
Cap
(#5)
Flat
Washer
(F)
Axle
Rod
(G)
Wheel
(I)
Base
Support

ENGLISH
8
HOW TO OPERATE
Before first use, clean the inside of the unit by wiping with a moist,
non-abrasive sponge, towel or cloth and then wipe with a non-
abrasive dry towel. Wipe down the inside of the Kettle and be
sure it is properly placed in the brackets before starting.
First, find a flat surface near an electrical outlet before1.
starting. Make sure your cord is away from any water source.
It is acceptable to use an extension cord if needed.
Gather your popcorn making supplies: popcorn, seasonings, bowls or bags for2.
holding the popcorn, cooking oil, Kernel Measuring Cup and Oil Measuring Spoon.
(Kernel Measuring Cup and Oil Measuring Spoon are included with your unit).
Plug in the appliance while switch is flipped to OFF position.3.
Make sure Kettle is properly secured in support brackets.4.
Make sure Kettle motor is plugged in.5.
Turn appliance ON by flipping the switch on the top of the6.
machine (see illustration above for location of switches). Allow
the appliance to run 3-5 minutes to heat up Kettle.
Turn unit OFF.7.
Use the Oil Measuring Spoon supplied with your OLD FASHIONED MOVIE TIME8.
POPCORN CART™ to add 2 teaspoons of your favorite popcorn cooking oil to
the Kettle. For best popping results, it is suggested to use light vegetable oil.
Add popcorn kernels to the Kettle using supplied Kernel Measuring Cup.9.
Turn the unit ON and close the door. In no time at all, you will10.
hear the popping begin. Fresh, hot popcorn will begin to burst
out of the flip lids on the Kettle - just like at the theater!
ON / OFF &
Light Switches
Crank Handle
Stainless Steel Kettle

ENGLISH
9
HELPFUL TIPS
SMOKING
If your OLD FASHIONED MOVIE TIME POPCORN CART™ begins to
smoke during cooking, it may be due to grease build up. In order to reduce
smoking, make sure that you clean the inside of the Kettle between uses.
CLEANING & MAINTENANCE
Make sure appliance is unplugged before cleaning. Unplug the outer plug1.
to the outlet as well as the Kettle motor plug inside the Main Unit.
Use slightly damp, non-abrasive sponge, towel or cloth to wipe down the2.
inside and outside of Main Unit, then wipe with a non-abrasive towel to dry.
Unplug Kettle motor and remove Kettle from support brackets.3.
Take Kettle out of the Main Unit. After removing Kettle from4.
Main Unit, fill 2/3 of Kettle with hot, soapy water.
Let the Kettle sit for 15 – 20 minutes to cut the grease. (time may vary – use5.
your own judgment depending on the amount of cleaning necessary)
Empty water. If necessary, use the scrubber side of a6.
cleaning sponge to scrub inside of Kettle.
Rinse inside carefully and dry.7.
Wipe outside of Kettle with damp cloth and dry.8.
NOTE: To protect the motor plug from getting wet, never immerse the Kettle
in any liquid. Never place any parts in the dishwasher. Always wash by hand.
RECIPES
The OLD FASHIONED MOVIE TIME POPCORN CART™ makes hot, fresh, theater style
popcorn every time – anytime! Enjoy your freshly popped corn in a variety of ways:
Regular theater style popcorn – add butter and salt.1.
Add a pinch of sugar and salt to popcorn for a sweet kettle corn taste.2.
Flavored popcorn – add seasoning from any gourmet popcorn seasoning kit.3.
Sprinkle parmesan cheese, salt and pepper.4.
Pop and eat without any seasonings, if you prefer, for a healthy, fiber-rich snack.5.

ENGLISH
10
RETURNS & WARRANTY
SHOULD YOUR UNIT NOT WORK OR IS DAMAGED WHEN
YOU FIRST TAKE IT OUT OF THE BOX, PLEASE RETURN
IT TO THE PLACE OF PURCHASE IMMEDIATELY.
OLD FASHIONED MOVIE TIME POPCORN CART™ / CCP-200
Should you have any questions, please contact us via email or at the
customer service number listed below between the hours of 8:00 AM
and 5:00 PM, Monday through Friday, Central Standard Time.
Distributed by:
Nostalgia Products Group LLC
1471 Partnership Dr.
Green Bay, WI 54304-5685
Customer Service
Phone: [phone]
Web: www.nostalgiaelectrics.com
Customer Service Inquiry
To submit a Customer Service inquiry, go to www.nostalgiaelectrics.com and
fill out the Customer Service Inquiry form and click the Submit button.
A representative will contact you as soon as possible.
This appliance is designed and built to provide many years of satisfactory
performance under normal household use. The distributor pledges to the
original owner that should there be any defects in material or workmanship
during the first 90 days of purchase, we will repair or replace the unit at
our option. Our pledge does not apply to damages caused by shipping,
mishandling or unit being dropped. A product deemed defective either from
manufacturing or being mishandled is up to the distributor’s discretion.
In order to obtain service under this warranty, please contact Nostalgia
Products Group, LLC at the telephone number listed above or by filling out
the Customer Service Inquiry Form located at www.nostalgiaelectrics.com.
This warranty does not apply to re-manufactured merchandise.
Please read these instructions carefully. Failure to comply with these instructions,
damages caused by improper replacement parts, abuse or misuse will void this
pledge to you and is being made in place of all other expressed warranties.