Nostalgia Electrics Retro MSH-105 User manual

RETRO MARTINI SHAKER

MSH-105
FOR HOUSEHOLD USE ONLY
READ THESE INSTRUCTIONS BEFORE USING THIS
UNIT!
SAVE THESE INSTRUCTIONS!

1
IMPORTANT PRECAUTIONS
Appliance Specifications:
120 Volts
90 Watts
60 Hz
Important Precautions to Remember:
A. NEVER immerse the main base unit in water.
B. NEVER operate near water or hot temperatures.
C. NEVER leave unattended while in use.
D. NEVER try to force the locking mechanisms.
E. Unplug unit from power outlet source when not in use
and when cleaning.
F. DO NOT put in dishwasher, microwave or oven.
G. Keep out of the reach of children.
H. This appliance is NOT A TOY.
I. This appliance is not intended for use by young children or cognitively challenged
individuals without supervision.
J. Young children should be supervised to ensure that they do not play with this
appliance.
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed,
including the following:
Read all instructions before operating this appliance.
1. Do not place hands or fingers inside door or attempt to touch the mixing shaker
while unit is running.
2. To protect against electrical shock, do not immerse cord, plug, or any part of the
main base unit in water or other liquids.
3. Close supervision is necessary when this or any appliance is used by or near
children.
4. Unplug from outlet when not in use, before removing parts and before cleaning.
5. DO NOT operate any appliance with a damaged cord or plug, or if the appliance
has been damaged in any manner. Return the appliance to the nearest repair
shop for examination or repair, or send back to company as stated in this booklet
in the warranty.
6. The appliance manufacturer does not recommend the use of any accessory
attachments. These may cause injuries.
7. FOR HOUSEHOLD USE ONLY. Do not use outdoors.
8. Do not let the cord hang over the edge of the table or countertop, or touch hot
surfaces.
9. DO NOT place on or near a hot gas or electric burner or in a heated oven.
10. Extreme caution must be used when moving this appliance.
11. DO NOT use this appliance for other than its intended use.

2
IMPORTANT SAFEGUARDS (Continued)
12. A unit that is plugged into an outlet should not be left unattended.
13. A short power supply cord is provided to reduce the risk resulting from becoming
entangled or tripping over a long cord.
14. This appliance has a polarized plug (one blade is wider than the other). To
reduce the risk of electrical shock, this plug is indented to fit into a polarized
outlet only one way.
SAVE THESE INSTRUCTIONS!
ABOUT YOUR RETRO MARTINI SHAKER™
Thank you for purchasing the RETRO MARTINI SHAKER™. This 50s-styled automatic
martini shaker will quickly mix martinis and other shaker type cocktail drinks. The RETRO
MARTINI SHAKER™ is perfect for entertaining! The ability to quickly mix refreshing
cocktail drinks will provide a fun addition to your family party or group gathering.
The RETRO MARTINI SHAKER™ includes a 16 ounce shaker with a sieve lid and closed
cap. The thin upright design requires little counter space and the handsome black and
silver finish will compliment your room or bar decor. The four rubber suction feet on the
bottom of the unit keep the RETRO MARTINI SHAKER™ stationery while shaking and
mixing drinks.
With your RETRO MARTINI SHAKER™ you can mix any alcohol (Gin, Whiskey, Vodka,
etc.) with tonic, soda, water or juices to create your favorite cocktail drink.
This machine is designed for kitchen or home bar use but can be used anywhere .
The RETRO MARTINI SHAKER™ is easy to use, and requires no assembly. Just follow
the step by step instructions in the following pages.
BEFORE FIRST USE
It is recommended that after unpacking your RETRO MARTINI SHAKER™, you wipe down
the unit with a clean damp non abrasive sponge or cloth, to remove any post production
soil or packing debris. Wash the 16 ounce Shaker cup in warm soapy water and towel dry.
USING YOUR RETRO MARTINI SHAKER™
1. Place your RETRO MARTINI SHAKER™ on a flat, level surface near an
electrical outlet.
2. Moisten the four suction cups and set the unit into place.
NOTE: TO RELEASE THE SUCTION CUPS, LIFT UP ON THE FRONT OF THE
UNIT AND TILT THE UNIT BACKWARD. THE AIR IN THE SUCTION CUPS
WILL RELEASE.
3. Plug the electrical cord into the wall outlet making sure the chosen location is
away from any water source.
4. Fill the Shaker cup with your choice of measured liquids, adding ice cubes as
your recipe states.
NOTE: You may want to place the cup in the freezer or fill with ice for about 5 or
10 minutes (and then empty) before adding your liquid.

3
USING YOUR RETRO MARTINI SHAKER™ (Continued)
5. Place the cocktail shaker into the bottom holding ring (at the base of the Retro
Martini unit) and close and latch the top ring (at the top of the Retro Martini unit).
Latch the cup into position by placing your hand around the ring and using your
thumb, pull back on the latch clip while pressing forward – then, as the clip closes
over the extruding tab - release the clip. This motion locks the martini shaker in
place. Close the door. (See illustration below)
6. Close the clear protective safety door securely. Turn the safety door handle down
counter clockwise. The safety door lock is secure, when the blue light goes on at
the base of the Retro Martini Shaker™.
NOTE: The unit will not function unless the safety door lock has been secured.
To open and unlock, turn the safety door handle clockwise to the left and up,
releasing the safety door lock.
7. Turn the power control knob (the ON/OFF and speed adjustment switch)
clockwise to power on the RETRO MARTINI SHAKER™ and increase the
shaking speed. Turn counter clockwise to lower and shut off the unit. Allow unit
to shake on high for no more then 45 seconds. To remove the shaker cup,
unlatch the top ring clip, open the ring and remove the cup. Within seconds, you
should have the desired results - just pour and enjoy!
Top stabilizing ring
with latch clip and tab Power/Control knob
Door
Bottom stabilizing ring
RETRO MARTINI SHAKER™
CLEANING
1. Unplug the unit before cleaning.
2. Remove the martini shaker and wash the shaker, sieve and cap in hot soapy
water. Rinse thoroughly and dry with a soft cloth or towel.
3. The motor unit outer box shell can be easily wiped clean with a non-abrasive
damp cloth or sponge and dried with soft non abrasive towel.
NOTE: To prolong the life and visual appearance of your RETRO MARTINI SHAKER™, be
sure to follow the cleaning instructions after every use. Return your shaker to the stabilizing
rings and close the cover door. You will be ready for your next cocktail event!

4
RETURNS & WARRANTY
SHOULD YOUR UNIT NOT WORK OR IS DAMAGED WHEN YOU FIRST TAKE IT OUT OF
THE BOX, PLEASE RETURN IT TO THE PLACE OF PURCHASE IMMEDIATELY.
Should you have any questions, please contact us via email or at the customer service number
listed below between the hours of 8:00 AM and 5:00 PM, Monday through Friday, Central
Standard Time.
Distributed by:
Nostalgia Products Group LLC
1471 Partnership Dr.
Green Bay, WI 54304-5685
Customer Service
Phone: [phone]
Web: www.nostalgiaelectrics.com
Customer Service Inquiry
To submit a Customer Service inquiry, go to www.nostalgiaelectrics.com and fill out the
Customer Service Inquiry form and click the Submit button. A representative will
contact you as soon as possible.
RETRO MARTINI SHAKER™
MSH-105
Limited Warranty
This appliance is designed and built to provide many years of satisfactory performance under
normal household use. The distributor pledges to the original owner that should there be any
defects in material or workmanship during the first 90 days of purchase, we will repair or replace
the unit at our option. Our pledge does not apply to damages caused by shipping, mishandling or
unit being dropped. A product deemed defective either from manufacturing or being mishandled
is up to the distributor’s discretion. In order to obtain service under this warranty, please contact
Nostalgia Products Group, LLC at the telephone number listed above or by filling out the
Customer Service Inquiry Form located at www.nostalgiaelectrics.com.
This warranty does not apply to re-manufactured merchandise.
Please read these instructions carefully. Failure to comply with these instructions, damages
caused by improper replacement parts, abuse or misuse will void this pledge to you and is being
made in place of all other expressed warranties.

Nostalgia Products Group LLC
1471 Partnership Dr.
Green Bay, WI 54304-5685
Visit Us Online at
www.nostalgiaelectrics.com
©2009 Nostalgia Products Group LLC
Rev. 8/21/09