Nostalgia Electrics Vintage Collection CCP610 Quick guide

All products are trademarks of Nostalgia Products Group, LLC.
Worldwide design & utility patented or patents pending.
© 2010 Nostalgia Products Group, LLC.
www.nostalgiaelectrics.com
(rev. 11/02/10)

CCP610
Vintage Collection™
Old Fashioned Movie Time Popcorn
Cart with Concession Stand
Instructions and Recipes

ENGLISH
2
CONTENTS
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . 3
IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . 3
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . 4
PARTS & ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . 5
HOW TO OPERATE . . . . . . . . . . . . . . . . . . . . . . . 9
HELPFUL TIPS . . . . . . . . . . . . . . . . . . . . . . . . . 10
CLEANING & MAINTENANCE . . . . . . . . . . . . . . . . . 10
RECIPES . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
RETURNS & WARRANTY . . . . . . . . . . . . . . . . . . . . 13
SAFETY
Appliance Specifications:
120 Volts, 60 Hz
750 Watts, ETL Approved
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and
on your appliance. Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards
that can kill or hurt you and others.
All safety messages will follow the safety alert symbol.
All safety messages will tell you what the potential hazard
is, tell you how to reduce the chance of injury, and tell you
what can happen if the instructions are not followed.

ENGLISH
3
IMPORTANT PRECAUTIONS
NEVER immerse in water.1.
NEVER use near water.2.
NEVER use an abrasive sponge nor cloth.3.
NEVER use a scouring pad on the appliance.4.
NEVER leave appliance unattended while in use.5.
NEVER force Kettle in or out of the brackets as this may cause gears6.
to become misaligned and appliance will not operate properly.
Unplug unit from outlet when not in use and during cleaning.
7.
DO NOT operate this appliance with a damaged cord or8.
plug, nor if the appliance ever malfunctions.
DO NOT clean any parts of this appliance in a dishwasher.9.
Keep out of reach of children.10.
This appliance is NOT A TOY.11.
Unsupervised young children and cognitively challenged12.
individuals should never operate this appliance.
Young children should be supervised while in proximity13.
of the appliance to ensure their safety.
IMPORTANT SAFEGUARDS
Basic safety precautions should always be followed when
using electrical appliances, including the following:
Read all instructions before operating this appliance.
1.
Keep door of Main Unit closed while operating. Do not2.
touch Kettle while operating; it gets very HOT.
To protect against electrical shock do not immerse cord, plug
3.
or any part of this appliance in water or other liquids.
Close supervision is necessary when any appliance is used near children.4.
Unplug from outlet when not in use, before removing parts and before cleaning.5.
DO NOT operate any appliance with a damaged cord or plug,6.
nor if the appliance has been damaged in any manner. Return the
appliance to the nearest repair shop for examination or repair.
The manufacturer does not recommend the use of accessory7.
attachments. Use of accessory attachments may cause injuries.
DO NOT use outdoors.
8.
Position the appliance as close to the outlet as possible9.
to prevent injury due to tripping over cord.
DO NOT leave Kettle motor running once popping has ceased.10.

ENGLISH
4
Extreme caution must be used when moving this appliance.11.
DO NOT use the appliance for other than its intended use.12.
An appliance that is plugged into an outlet should not be left unattended.13.
Check Kettle for presence of foreign objects prior to use.14.
Make sure the Kettle is properly attached to brackets before15.
operating and that the motor plug is plugged into the Kettle.
A short power supply cord is provided to reduce the risk resulting
16.
from becoming entangled or tripping over a long cord.
Longer detachable power supply cords can be used if care is exercised in their use.
17.
The marked electrical rating of an extension cord should be at18.
least as great as the electrical rating of the appliance.
This appliance has a polarized plug (one blade is wider than19.
the other). To reduce the risk of electrical shock, this plug is
intended to fit into a polarized outlet only one way.
Save these instructions!20.
INTRODUCTION
Thank you for purchasing the OLD FASHIONED MOVIE TIME POPCORN
CART with CONCESSION STAND, a product in Nostalgia Electrics’ Vintage
Series™. This 59” tall vendor-style popcorn cart will be the hit of every party.
It pops up to 24 cups of hot, fresh, kettle cooked popcorn per batch. Providing
a vintage look and feel, reminiscent of silent movie houses and carnivals
circa-early 1900s, the OLD FASHIONED MOVIE TIME POPCORN CART
with CONCESSION STAND is designed for both home and commercial use.
It features a large, stainless steel kettle with a built-in stirring system and
kernel catcher to keep unpopped kernels out of each perfect batch. There is a
compartment in the base of the unit to store supplies, making it easy to keep
the cart well stocked and organized. The other side of the base features a
concession stand with three illuminated shelves to hold a variety of treats. The
OLD FASHIONED MOVIE TIME POPCORN CART with CONCESSION STAND
has an easy-to-clean design. Its accessible height makes serving a snap.

ENGLISH
5
PARTS & ASSEMBLY
Hardware
#1 Screw (10mm) #2 Bolt (10mm) #3 Bolt (65mm)
Qty. 4 Qty. 8 Qty. 2
#4 Flat Washer #5 Nut Cap #6 Storage #7 Concession Stand
Qty. 14 Qty. 4 Compartment Handle Handle
& Screws Qty. 1
Qty. 1
#8 Concession Stand#9 Concession Stand #10 Concession #11 Concession
Handle Bracket Door Plate Stand Handle Stand Handle
Qty. 1 Qty. 1 Screw (12mm) Screws (8mm)
Qty. 1 Qty. 2
Screw (12mm)
Qty. 1 Qty. 2
Screw (8mm) Lock met
Qty. 1
Qty. 1
Handle Handle bracket
Qty. 1
PDF !"# "pdfFactory Pro" $#%&'( www.fineprint.cn
Screw (12mm)
Qty. 1 Qty. 2
Screw (8mm) Lock met
Qty. 1
Qty. 1
Handle Handle bracket
Qty. 1
PDF !"# "pdfFactory Pro" $#%&'( www.fineprint.cn
Screw (12mm)
Qty. 1 Qty. 2
Screw (8mm) Lock met
Qty. 1
Qty. 1
Handle Handle bracket
Qty. 1
PDF !"# "pdfFactory Pro" $#%&'( www.fineprint.cn
Screw (12mm)
Qty. 1 Qty. 2
Screw (8mm) Lock met
Qty. 1
Qty. 1
Handle Handle bracket
Qty. 1
PDF !"# "pdfFactory Pro" $#%&'( www.fineprint.cn
Screw (12mm)
Qty. 1 Qty. 2
Screw (8mm) Lock met
Qty. 1
Qty. 1
Handle Handle bracket
Qty. 1
PDF !"# "pdfFactory Pro" $#%&'( www.fineprint.cn

ENGLISH
6
Parts
(A) Main Unit (B) Kernel Measuring (C) Concession (D) Oil Measuring
Cup Stand Spoon (1 tbsp.)
(E) Push Handle (F) Axle Bolts (G) Wheel (H) Wrench
(I) Base Support (J) Cross Bar (K) Leg Assembly (L) Popcorn Scoop
Assembly of Handles
Attach #6 Handle1.
and Screws
to Storage
Compartment door.
Attach #72.
Concession
Stand Handle
and parts using
directions below:

ENGLISH
7
Assembly of Base Support
Push Handle (E) attaches onto the Concession Stand1.
(C) using all of the supplied #1 Screws.
Insert Cross Bar (J) into the square inserts on the inside of Base Support (I)2.
and secure from below with two #2 Bolts and two #4 Flat Washers. Insert
the Leg Assembly (K) over the protruding ends of the Base Support (I) and
fasten four #3 Bolts and four #4 Flat Washers and four #5 Nut Caps.
Assemble Base Support (I) into the bottom of the Concession Stand3.
(C) and secure with four #2 Bolts and four #4 Flat Washers.

ENGLISH
8
Assembly of Wheels
Insert Axle Bolt (F) into Base Support (I).1.
Put on #5 Flat Washer. Slide Wheel (G) into Axle Bolt (F)2.
and add a second #4 Flat Washer.
Use Wrench (H) to tighten the #5 Nut Cup.3.
Add #4 Flat Washer, second Wheel (G), another #4 Flat Washer, and #5 Nut4.
Cap to the other side of the Axle Bolt (F), following the directions above.
Use Wrench (H) to tighten the #5 Nut Cap.5.
Assembly of Main Unit
Place Main Unit (A) onto the top of the Concession Stand (C).1.
Ensure that the two inserting pins at the bottom of the Main2.
Unit (A) line up correctly so that Main Unit (A) can be locked
under the beam of the Concession Stand (C).
(#5)
Nut
Cap
(#4)
Flat
Washer
(F)
Axle
Bolt
(G)
Wheel
(I)
Base
Support

ENGLISH
9
HOW TO OPERATE
Before first use, clean the inside of the unit by wiping with a moist,
non-abrasive sponge, towel or cloth and then wipe with a non-
abrasive dry towel. Wipe down the inside of the Kettle and be
sure it is properly placed in the brackets before starting.
First, find a flat surface near an electrical outlet before
1.
starting. Make sure your cord is away from any water source.
It is acceptable to use an extension cord if needed.
Gather your popcorn making supplies: popcorn, seasonings, bowls or bags for2.
holding the popcorn, cooking oil, Kernel Measuring Cup and Oil Measuring Spoon.
(Kernel Measuring Cup and Oil Measuring Spoon are included with your unit).
Make sure Kettle is properly secured in support brackets.
3.
Make sure Kettle motor is plugged in.4.
Plug in the appliance while switch is flipped to OFF position.5.
Turn appliance ON by flipping the switch on the top of the6.
machine (see illustration above for location of switches). Allow
the appliance to run 3-5 minutes to heat up Kettle.
Once Kettle has heated, turn unit OFF before adding ingredients.7.
Use the Oil Measuring Spoon supplied with your OLD FASHIONED8.
MOVIE TIME POPCORN CART with CONCESSION STAND to add
3 tablepoons of your favorite popcorn cooking oil to the Kettle. For
every Measuring Cup full of kernels (6 oz.), add 3 spoonfuls (3 tbsp.)
of oil. For best results, light vegetable oil is recommended.
Add 6oz popcorn kernels to the Kettle using supplied Kernel Measuring Cup.
9.
Close the door and turn unit ON. In no time at all, you will hear10.
the popping begin. Fresh, hot popcorn will begin to burst out
of the flip lids on the Kettle - just like at the theater!
Fill the Concession Stand shelves with your favorite candy and treats.
11.
ON / OFF &
Light Switches
Crank Handle
Stainless Steel Kettle

ENGLISH
10
HELPFUL TIPS
SMOKING
If your OLD FASHIONED MOVIE TIME POPCORN CART begins to smoke
during cooking, it may be due to grease build up. In order to reduce smoking,
make sure that you clean the inside of the Kettle between uses.
POPCORN MAKER
You can also use the popcorn maker without
the Concession Stand and Base Suport.
Make sure that Main Unit is on a level surface
with proper ventillation. Follow instructions for
making popcorn in How to Operate section.
CLEANING &
MAINTENANCE
To protect the motor plug from getting wet, never immerse the Kettle in
any liquid. Never place any parts in the dishwasher. Always wash by hand.
Make sure appliance is unplugged before cleaning. Unplug the outer plug
1.
to the outlet as well as the Kettle motor plug inside the Main Unit.
Use slightly damp, non-abrasive sponge, towel or cloth to wipe down the2.
inside and outside of Main Unit, then wipe with a non-abrasive towel to dry.
Unplug Kettle motor and remove Kettle from support brackets.3.
Take Kettle out of the Main Unit. After removing Kettle from4.
Main Unit, fill ²⁄
³of Kettle with hot, soapy water.
Let the Kettle sit for 15 – 20 minutes to cut the grease. (time may vary – use5.
your own judgment depending on the amount of cleaning necessary)
Empty water. If necessary, use the scrubber side of a6.
cleaning sponge to scrub inside of Kettle.
Rinse inside carefully and dry.
7.
Wipe outside of Kettle with damp cloth and dry.8.
Concession Stand Lights
The ON/OFF switch and battery
pack for the Concession Stand is
located behind the Concession Stand
shelves and can be easily accessed
by opening the door to the Storage
Compartment. The Concession
Stand lights take two AA batteries.
Batteries are not included.

ENGLISH
11
RECIPES
The OLD FASHIONED MOVIE TIME POPCORN CART with
CONCESSION STAND makes hot, fresh, theater style popcorn
anytime! Enjoy your freshly popped corn in a variety of ways:
Regular theater style popcorn – add butter and salt.•
Add a pinch of sugar and salt to popcorn for a sweet kettle corn taste.•
Flavored popcorn – add seasoning from any gourmet popcorn seasoning kit.•
Try some of these fun recipes:•
NOTE: 1 gallon = 16 cups
PARMESEAN POPCORN
1 Gallon of•
Popped Corn
1 Tsp Garlic•
Powder
3 Green Onions,•
finely chopped
½ Tsp Cracked•
Pepper
1 Tsp Sea Salt•
1 Cup Parmesean•
Cheese, grated
(more or less
to taste)
3 Tbsps Olive•
Oil, heated
Pop corn kernels using the OLD FASHIONED
MOVIE TIME POPCORN CART with
CONCESSION STAND as directed on page 9.
Combine garlic powder, green onions, cracked
pepper, sea salt and parmesean cheese. Set aside.
In a large mixing bowl, drizzle hot
olive oil over popcorn.
Toss until well coated.
Slowly add in dry ingredients while continuously
strirring popcorn until well coated.
You may also shake the dry ingredients over
popcorn in a large paper or muslin bag.
TRADITIONAL POPCORN BALLS
½ Cup Popcorn•
½ Cup Corn Syrup•
½ Cup Granulated•
Sugar
½ Teaspoon Salt•
1 Stick of Butter,•
softened
Pop corn kernels using the OLD FASHIONED
MOVIE TIME POPCORN CART with
CONCESSION STAND as directed on page 9.
Mix corn syrup, sugar and salt together in pot and
dissolve over medium heat for about 3 minutes.
Add popcorn to pot, stirring and tossing consistently
until popcorn is evenly coated at low heat.
Remove from heat.
Use softened butter to form balls while
popcorn mixture is still warm.
Wrap individual balls in plastic wrap, tie
and store at room temperature.

ENGLISH
12
CHUNKY MONKEY
1 Gallon Popcorn•
1 12-oz bag•
Semi-Sweet
Chocolate Chips
1 12-oz bag Peanut•
Butter Morsels
4.2 oz bag Banana•
Chips, broken
into small pieces
11-oz bag Peanuts•
Pop corn kernels using the OLD FASHIONED
MOVIE TIME POPCORN CART with
CONCESSION STAND as directed on page 9.
Melt chocolate chips and peanut butter morsels
over stove, as packaging recommends.
Line cookie sheet with wax paper.
Toss together popcorn and banana chips.
Spread popcorn and banana chip
mixture evenly over cookie sheet.
Drizzle melted chocolate and peanut butter
mixture over popcorn and banana chips.
Sprinkle peanuts over chocolate
and peanut butter mixture.
Allow to cool.
When chocolate and peanut butter has hardened,
break up the Chunky Monkey into pieces.
Can be stored in plastic freezer bags.
POPCORN PEPPERMINT BARK
1 Gallon•
Popped Corn
1 12-oz bag Semi-•
Sweet or Dark
Chocolate Chips
1¼ cup Peppermint•
Sticks, crushed
Pop corn kernels using the OLD FASHIONED
MOVIE TIME POPCORN CART with
CONCESSION STAND as directed on page 9.
Melt chocolate chips over stove,
as packaging recommends.
Line cookie sheet with wax paper.
Spread popcorn evenly over cookie sheet.
Drizzle melted chocolate over popcorn.
Sprinkle crushed peppermints over chocolate.
Allow to cool.
When chocolate has hardened, break up
Popcorn Peppermint Bark into pieces.
Can be stored in plastic freezer bags.

ENGLISH
13
RETURNS & WARRANTY
SHOULD YOUR UNIT NOT WORK OR IS DAMAGED WHEN
YOU FIRST TAKE IT OUT OF THE BOX, PLEASE RETURN
IT TO THE PLACE OF PURCHASE IMMEDIATELY.
OLD FASHIONED MOVIE TIME POPCORN CART
with CONCESSION STAND / CCP610
Should you have any questions, please contact us via email or at the
customer service number listed below between the hours of 8:00 AM
and 5:00 PM, Monday through Friday, Central Standard Time.
Distributed by:
Nostalgia Products Group LLC
1471 Partnership Dr.
Green Bay, WI 54304-5685
Customer Service
Phone: [phone]
Web: www.nostalgiaelectrics.com
Customer Service Inquiry
To submit a Customer Service inquiry, go to www.nostalgiaelectrics.com and
fill out the Customer Service Inquiry form and click the Submit button.
A representative will contact you as soon as possible.
This appliance is designed and built to provide many years of satisfactory
performance under normal household use. The distributor pledges to the
original owner that should there be any defects in material or workmanship
during the first 90 days of purchase, we will repair or replace the unit at
our option. Our pledge does not apply to damages caused by shipping,
mishandling or unit being dropped. A product deemed defective either from
manufacturing or being mishandled is up to the distributor’s discretion.
In order to obtain service under this warranty, please contact Nostalgia
Products Group, LLC at the telephone number listed above or by filling out
the Customer Service Inquiry Form located at www.nostalgiaelectrics.com.
This warranty does not apply to re-manufactured merchandise.
Please read these instructions carefully. Failure to comply with these instructions,
damages caused by improper replacement parts, abuse or misuse will void this
pledge to you and is being made in place of all other expressed warranties.