Nostalgia CCP610 Quick guide

All products are trademarks of Nostalgia Products LLC.
Worldwide design & utility patented or patents pending.
© 2018 Nostalgia Products LLC.
www.nostalgiaproducts.com
(rev. 04/04/18 DL)

All products are trademarks of Nostalgia Products LLC.
Worldwide design & utility patented or patents pending.
© 2018 Nostalgia Products LLC.
www.nostalgiaproducts.com
(rev. 04/04/18 DL)
CCP610
Vintage 10 Oz. Popcorn & Concession Cart
Palomitas y Carrito de Concesiones
Chariot à maïs soué avec kiosque de concession
Instructions and Recipes
Instrucciones y recetas
Instructions et recettes

ENGLISH
2
Make every day a party!
Visit www.nostalgiaproducts.com for more fun products.
CONTENTS
SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
ADDITIONAL IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . 3
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
PARTS & ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
HOW TO OPERATE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
HELPFUL TIPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
CLEANING & MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . .11
RECIPES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
RETURNS & WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Your safety and the safety of others is very important.
We have provided many important safety messages in this manual and
on your appliance. Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can
cause serious injury to you and others.
All safety messages will follow the safety alert symbol.
All safety messages will tell you what the potential hazard is, tell you how to reduce the
chance of injury, and tell you what can happen if the instructions are not followed.
SAFETY
Appliance Specications:
120 Volts, 60 Hz
820 Watts
THIS PRODUCT IS FOR USE IN 120V AC OUTLET ONLY.
Refer to www.nostalgiaproducts.com/user-manuals/ for the most updated manual.

ENGLISH
3
IMPORTANT SAFEGUARDS
A person who has not read and understood all operating and safety instructions
is not qualied to operate this appliance. All users of this appliance must read and
understand this Instruction Manual before operating or cleaning this appliance.
When using electrical appliances, basic safety precautions
should always be followed, including:
1. Read all instructions before operating this appliance.
2. DO NOT TOUCH the hot surfaces. Use handles or knobs.
3. This appliance is NOT A TOY.
4. Unsupervised young children and cognitively challenged
individuals should never operate this appliance.
5. Close supervision is necessary when any appliance is used by or near children.
6. To protect against electrical shock do not immerse cord, plug
or any part of this unit in water or other liquids.
7. Unplug from outlet when not in use, before removing parts and before cleaning.
Allow to cool before putting on or taking o any parts, and before cleaning.
8. DO NOT operate any appliance with a damaged cord or plug, or after the appliance
malfunctions, or if the appliance has been damaged in any manner. Return the
appliance to the nearest repair shop for examination, repair or adjustment.
9. The manufacturer does not recommend the use of accessory attachments other than
what is provided by the manufacturer. Use of attachments may cause injuries.
10. DO NOT use the appliance for other than its intended use.
11. DO NOT use outdoors. FOR HOUSEHOLD USE ONLY.
12. DO NOT place on or near a hot gas or electric burner, or in a heated oven.
13. DO NOT let cord hang over edge of table or counter, or touch hot surfaces.
14. NEVER leave unit unattended while in use or when plugged into an outlet.
15. Extreme caution must be used when moving an appliance containing hot food.
16. Always attach plug to appliance rst, then plug cord in the wall outlet. To
disconnect, turn any control to "o," then remove plug from wall outlet.
ADDITIONAL IMPORTANT SAFEGUARDS
Operating Safety Precautions
1. DO NOT touch kettle and keep door of main unit closed while
operating. Kettle gets VERY HOT during operation.
2. Ensure the Kettle is properly attached to brackets before operating
and that the motor plug is plugged into the Kettle.
3. Check Kettle for presence of foreign objects prior to use.
4. DO NOT place butter, seasonings, or anything other than popcorn kernels and oil into
the Kettle. Use of these substances may cause hazards and may damage the unit.
5. DO NOT operate unit without oil as the popcorn kernels may burn or smoke.
6. DO NOT leave Kettle motor running once popping has ceased.

ENGLISH
4
7. Exercise caution when emptying popcorn. Always use Crank Handle
to empty popcorn, and make sure the unit is over a countertop so
that residual hot oil running out will not cause burns.
8. DO NOT use the appliance for other than its intended use.
Instructions for the Electrical Cord and Plug
1. ELECTRICAL SHOCK HAZARD: Failure to follow these instructions
can result in death, re, or electrical shock.
• Plug into a grounded 3 prong outlet.
• DO NOT remove ground prong.
• DO NOT use an adapter.
• DO NOT use an extension cord.
2. This unit MUST be grounded. In the event of an electrical short circuit, grounding
reduces the risk of electric shock by providing an escape wire for the electric current.
This unit is equipped with a cord having a grounding wire with a grounding plug.
The plug must be plugged into an outlet that is properly installed and grounded.
3. WARNING: Improper use of the grounding plug can result in a risk of electric
shock. If the plug does not t fully into the outlet, contact a qualied
electrician. Do not attempt to modify the plug in any way.
4. A short power supply cord is provided to reduce the risk resulting
from becoming entangled or tripping over a long cord.
5. The manufacturer does not recommend using this machine in countries that do not
support 120V AC even if a voltage adapter, transformer, or converter is in use.
SAVE THESE INSTRUCTIONS!
INTRODUCTION
Thank you for purchasing the 10 OZ. POPCORN & CONCESSION CART, a product in
Nostalgia's Vintage Series™. This 59" tall vendor-style popcorn cart will be the hit of every
party. It pops up to 40 cups of hot, fresh, kettle cooked popcorn per batch. Providing a
vintage look and feel, reminiscent of silent movie houses and carnivals circa-early 1900s,
the 10 OZ. POPCORN & CONCESSION CART is designed for both home and commercial
use. It features a large, stainless steel kettle with a built-in stirring system and kernel
catcher to keep unpopped kernels out of each perfect batch. There is a compartment
in the base of the unit to store supplies, making it easy to keep the cart well stocked
and organized. The other side of the base features a concession stand with three
illuminated shelves to hold a variety of treats. The 10 OZ. POPCORN & CONCESSION
CART has an easy-to-clean design. Its accessible height makes serving a snap.
Visit www.nostalgiaproducts.com to nd out which kits
and accessories are available for this product!

ENGLISH
5
PARTS & ASSEMBLY
Hardware
#8 Concession
Stand Door Plate
Qty. 1
#9 Concession Stand
Handle Screw
Qty. 2
#5 Flat Washer
Qty. 12
#6 Nut Cap
Qty. 4
#7 Concession
Stand Handle
Qty. 1
#1 Screw (10mm)
Qty. 12
#2 Bolt (60mm)
Qty. 2
#3 Spring Washer
Qty. 4
#4 Flat Washer
Qty. 10

ENGLISH
6
Parts
(A) Main Unit (B) Kernel Measuring (C) Concession (D) Oil Measuring
Cup Stand Spoon (1 tbsp.)
(E) Push Handle (F) Axle Bolts (G) Wheel (H) Wrench
(I) Base Support (J) Cross Bar (K) Leg Assembly (L) Popcorn Scoop
Assembly of Handles
1. Attach #7 Handle and parts to as shown:

ENGLISH
7
Assembly of Base Support
1. Push Handle (E) attaches onto the Concession Stand (C)
using four #1 Screws and four #5 Flat Washers.
2. Insert Cross Bar (J) into the square inserts on the inside of Base Support (I) and secure
from below with two #1 Screws and two #5 Flat Washers. Insert the Leg Assembly
(K) into the square inserts between the ends of the Base Support (I) and fasten from
inside with two #2 Bolts, four #4 Flat Washers, two #3 Spring Locking Washers and two
#6 Nut Caps. Also secure from above with two #1 Screws and two #5 Flat Washers.
3. Assemble Base Support (I) into the bottom of the Concession Stand
(C) and secure with four #1 Screws and four #5 Flat Washers.

ENGLISH
8
Assembly of Wheels
1. Put #4 Flat Washer onto Axle Bolt (F) and insert into Base Support (I).
2. Put on #4 Flat Washer. Slide Wheel (G) onto Axle Bolt (F), then add a
second #4 Flat Washer, a #3 Spring Washer, and #6 Nut Cap.
3. Use Wrench (H) to tighten the #6 Nut Cap.
4. On the other side of Base Support (I), insert second Axle Bolt (F) with #4 Flat Washer, add #4
Flat Washer, second Wheel (G), another #4 Flat Washer, a #3 Spring Washer, and a #6 Nut Cap.
5. Use Wrench (H) to tighten the #6 Nut Cap.
Assembly of Main Unit
1. Place Main Unit (A) onto the top of the Concession Stand (C).
2. Ensure that the two inserting pins at the bottom of the Main Unit (A) line up correctly
so that Main Unit (A) can be locked under the beam of the Concession Stand (C).
#3 Spring
Washer
#6
Nut
Cap
#4 Flat
Washer
(G) Wheel
(I) Base
(F) Axle
Bolt
#4 Flat
Washer