NovaStar MX Series User manual

MX40 Pro
LED Display Controller
User Manual
XI'AN NOVASTAR TECH CO., LITD.

MX40 Pro LED Display Controller User Manual
www.novastar.tech
i
Change History
Document Version
Release Date
Description
V1.0.0
2022-07-09
First release
XI'AN NOVASTAR TECH CO., LITD.

MX40 Pro LED Display Controller User Manual
www.novastar.tech
ii
Contents
Change History................................................................................................................................................................................i
Contents ......................................................................................................................................................................................... ii
1 Overview......................................................................................................................................................................................1
2 Appearance..................................................................................................................................................................................2
2.1 Front Panel............................................................................................................................................................................2
2.2 Rear Panel ............................................................................................................................................................................2
3 Applications..................................................................................................................................................................................6
4 UI Introduction .............................................................................................................................................................................7
4.1 Home Screen ........................................................................................................................................................................7
4.2 Main Menu.............................................................................................................................................................................9
5 Initial Screen Configuration........................................................................................................................................................10
5.1 Quick Configuration via Front Panel Screen........................................................................................................................10
5.1.1 Set Input Source........................................................................................................................................................10
5.1.2 Load Cabinet Config File ...........................................................................................................................................11
5.1.3 Configure the Screen Quickly....................................................................................................................................11
5.2 Free Screen Configuration via VMP....................................................................................................................................12
6 Display Effect Adjustment ..........................................................................................................................................................13
6.1 Apply Presets ......................................................................................................................................................................13
6.2 Set External Input Source Parameters................................................................................................................................13
6.2.1 View Input Source Information (HDMI1, HDMI2, HDMI3, DP, SDI)............................................................................13
6.2.2 Set Resolution and Frame Rate (HDMI1, HDMI2, HDMI3 and DP only)....................................................................13
6.2.3 Adjust Color (HDMI1, HDMI2, HDMI3, DP, SDI)........................................................................................................14
6.2.4 Set HDR (HDMI1, HDMI2 and HDMI3 only) ..............................................................................................................14
6.3 Set Internal Input Sources...................................................................................................................................................15
6.4 Set Output Parameters........................................................................................................................................................16
6.4.1 Adjust Screen Brightness...........................................................................................................................................16
6.4.2 Adjust Gamma and Color Temperature......................................................................................................................16
6.4.3 Enable 3D Function...................................................................................................................................................17
6.4.4 Set Low Latency........................................................................................................................................................18
6.4.5 Set Bit Depth..............................................................................................................................................................18
6.4.6 Set Sync Source........................................................................................................................................................19
6.5 Set Layers (Alll-In-One Controller Mode only).....................................................................................................................19
7 Device Management..................................................................................................................................................................21
7.1 Switch Working Mode..........................................................................................................................................................21
7.2 Set a Backup Device...........................................................................................................................................................21
7.3 Set an IP Address................................................................................................................................................................21
7.4 Enable Mapping ..................................................................................................................................................................22
7.5 Control Display Status.........................................................................................................................................................22
7.6 Diagnostics..........................................................................................................................................................................23
7.7 View the Firmware Version..................................................................................................................................................23
7.8 Reset to Factory Settings....................................................................................................................................................24
8 Basic System Settings...............................................................................................................................................................25
8.1 Set Language......................................................................................................................................................................25
8.2 Set Session Timeout............................................................................................................................................................25
8.3 View Service Information.....................................................................................................................................................25
9 Specifications.............................................................................................................................................................................26
XI'AN NOVASTAR TECH CO., LITD.

MX40 Pro LED Display Controller User Manual
www.novastar.tech
1
1 Overview
The MX40 Pro is a flagship all-in-one LED display controller with 20 Ethernet ports in the brand-new control system
COEX series of Xi’an NovaStar Tech Co., Ltd. (hereinafter referred to as NovaStar). This controller integrates video
processing and video control into one box and offers rich video input connectors (HDMI 2.0, DP 1.2 and 12G-SDI),
20x Ethernet output ports and 4x 10G optical ports. It can also work with the brand-new software VMP (Vision
Management Platform) to provide a better operation and control experience.
XI'AN NOVASTAR TECH CO., LITD.

MX40 Pro LED Display Controller User Manual
www.novastar.tech
2
2 Appearance
2.1 Front Panel
Name
Description
Running Indicator
Solid red: Standby
Solid blue: The device is being powered on.
Solid green: The device is running normally.
Flashing red: The device is running abnormally.
Standby Button
Press the button to power on or power off the device.
Hold down the button for 5s or longer to restart the device.
USB 2.0
Used to send cabinet configuration files and export the diagnostic result
TFT Screen
A 3.5-inch screen that displays the device status, menus, submenus and messages for
parameter settings
Knob
On the home screen, press the knob to enter the main menu screen.
On the main menu screen, rotate the knob to select a menu item or adjust the parameter
value. Press the knob to confirm the operation.
Hold down the knob and BACK button simultaneously for 5s or longer to lock or unlock
the buttons.
BACK
Go back to the previous menu or cancel the current operation.
2.2 Rear Panel
XI'AN NOVASTAR TECH CO., LITD.

MX40 Pro LED Display Controller User Manual
www.novastar.tech
3
Inputs (INPUT area)
Type
Qty
Description
HDMI 2.0-1 IN
1
Resolutions
Max resolution: 4096×2160@60Hz or 8192×1080@60Hz
Min resolution: 800×600@60Hz
Max
width/height
Max width: 8192 pixels (8192×1080@60Hz)
Max height: 8192 pixels (1080×8192@60Hz)
Frame rates
23.98/24/25/29.97/30/47.95/48/50/59.94/60/71.93/72/75/100/119.88/
120/143.86/144/240 Hz
HDR
Support HDR10 and comply with the SMPTE ST 2084 and SMPTE
ST 2086 standards.
Support HLG and comply with the BT.2100 standard.
EDID
management
Support standard resolutions, up to 3840×2160@60Hz.
Support custom input resolutions.
HDCP
HDCP 2.2 compliant, backwards compatible
Interlaced
signal inputs
Not supported
HDMI 2.0-2 IN
1
Resolutions
Max resolution: 4096×2160@60Hz or 8192×1080@60Hz
Min resolution: 800×600@60Hz
Max
width/height
Max width: 8192 pixels (8192×1080@60Hz)
Max height: 7680 pixels (1080×7680@60Hz)
Frame rates
23.98/24/25/29.97/30/47.95/48/50/59.94/60/71.93/72/75/100/119.88/
120/143.86/144/240 Hz
HDR
Support HDR10 and comply with the SMPTE ST 2084 and SMPTE
ST 2086 standards.
Support HLG and comply with the BT.2100 standard.
EDID
management
Support standard resolutions, up to 3840×2160@60Hz.
Support custom input resolutions.
HDCP
HDCP 2.2 compliant, backwards compatible
Interlaced
signal inputs
Not supported
HDMI 2.0-3 IN
1
Resolutions
Max resolution: 4096×2160@60Hz or 8192×1080@60Hz
Min resolution: 800×600@60Hz
Max
width/height
Max width: 8192 pixels (8192×1080@60Hz)
Max height: 7680 pixels (1080×7680@60Hz)
Frame rates
23.98/24/25/29.97/30/47.95/48/50/59.94/60/71.93/72/75/100/119.88/
120/143.86/144/240 Hz
XI'AN NOVASTAR TECH CO., LITD.

MX40 Pro LED Display Controller User Manual
www.novastar.tech
4
HDR
Support HDR10 and comply with the SMPTE ST 2084 and SMPTE
ST 2086 standards.
Support HLG and comply with the BT.2100 standard.
EDID
management
Support standard resolutions, up to 3840×2160@60Hz.
Support custom input resolutions.
HDCP
HDCP 2.2 compliant, backwards compatible
Interlaced
signal inputs
Not supported
DP 1.2
1
Resolutions
Max resolution: 4096×2160@60Hz or 8192×1080@60Hz
Min resolution: 800×600@60Hz
Max
width/height
Max width: 8192 pixels (8192×1080@60Hz)
Max height: 8192 pixels (1080×8192@60Hz)
Frame rates
23.98/24/25/29.97/30/47.95/48/50/59.94/60/71.93/72/75/100/119.88/
120/143.86/144/240 Hz
EDID
management
Support standard resolutions, up to 3840×2160@60Hz.
Support custom input resolutions.
HDCP
HDCP 1.3 compliant
Interlaced
signal inputs
Not supported
12G-SDI IN
1
Standards
Support ST-2082 (12G), ST-2081 (6G), ST-424 (3G) and ST-292
(HD) standard video inputs.
Support 3G-Level A/Level B (DS mode).
Resolutions
Max resolution: 4096×2160@60Hz
Frame rates
Support frame rates up to 60 Hz.
Outputs (OUTPUT area)
Type
Qty
Description
1–20
20
Gigabit Ethernet output ports. Support hot backup between Ethernet ports.
Max loading capacity per port:
8bit@60Hz: 650,000 pixels
10bit@60Hz: 480,000 pixels (available only with the A10s Pro receiving card)
10/12bit@60Hz: 325,000 pixels
OPT 1–4
4
10G optical output ports
OPT 1 transmits the data of Ethernet ports 1 to 10.
OPT 3 is the copy channel of OPT 1.
OPT 2 transmits the data of Ethernet ports 11 to 20.
OPT 4 is the copy channel of OPT 2.
HDMI 2.0-1 LOOP
1
HDMI loop through
HDMI 2.0-2 LOOP
1
XI'AN NOVASTAR TECH CO., LITD.

MX40 Pro LED Display Controller User Manual
www.novastar.tech
5
HDMI 2.0-3 LOOP
1
12G-SDI LOOP
1
SDI loop through
SPDIF OUT
1
A digital audio output (Reserved)
Controls (CONTROL area)
Type
Qty
Description
ETHERNET
2
Gigabit Ethernet control ports. Support TCP/IP protocol and star topology.
They have the same functions without priority and order, and can be connected to
VMP software. No switch is needed to cascade control of multiple devices as a
network switch is already built in.
GENLOCK
1
A pair of Genlock signal connectors. Support Bi-Level and Tri-Level.
IN: Accept the sync signal.
LOOP: Loop the sync signal.
For standard Genlock signal generators, up to 20 MX40 Pro devices can be cascaded.
AUX
1
An auxiliary connector that connects to the central control device (RS232) (Reserved)
Power
100-240V~,
50/60Hz, 1.5A
1
An AC power input connector and switch
XI'AN NOVASTAR TECH CO., LITD.

MX40 Pro LED Display Controller User Manual
www.novastar.tech
6
3 Applications
The MX40 Pro has two typical application scenarios as shown below. In those application examples, the LED screen
size is 4096×2160.
Application 1: Synchronous Mosaic
Application 2: Long-Distance Transmission via OPT Ports
XI'AN NOVASTAR TECH CO., LITD.

MX40 Pro LED Display Controller User Manual
www.novastar.tech
7
4 UI Introduction
4.1 Home Screen
After the device is powered on, the home screen showing device related information is displayed as follows.
Figure 4-1 Home screen
The home screen is shown in Figure 4-1 and the home screen descriptions are shown in Table 4-1.
Home screen descriptions
Classification
Content
Description
Top line
MX40 Pro
The device name
The name can be changed in VMP software.
Send-Only Controller
The device working mode
All-In-One Controller: The video processing and sending
functions are available.
Independent Controller: Only the video sending function is
available.
For related operations, please refer to 7.1 Switch Working
Mode.
The device button lock status
The icon displayed: The buttons are locked.
The icon not displayed: The buttons are unlocked.
Hold down the knob and BACK button simultaneously for 5s or
longer to lock or unlock the buttons.
The connection status of the Ethernet ports
Blue: Connected
Gray: Disconnected
192.168.0.10
The device IP address
For related operations, please refer to 7.3 Set an IP Address.
XI'AN NOVASTAR TECH CO., LITD.

MX40 Pro LED Display Controller User Manual
www.novastar.tech
8
Classification
Content
Description
Input
HDMI1, HDMI2, HDMI3, DP,
SDI, Internal
The device input source type and status
Green: The signal is accessed normally and used.
Blue: The signal is accessed normally, but not used.
Red: The signal is not accessed, or the accessed signal is
abnormal.
Gray: The signal is abnormal and not used.
For related operations in the working mode of Send-Only
Controller, please refer to 5.1.1 Set Input Source.
HDMI1 4096*[email protected]
The resolution and frame rate of the currently available input
source
If multiple input sources are available, the resolution and frame
rate of each input source will be displayed one by one. If the
input is used by the layer, the layer number will be displayed
below.
For related operations, please refer to 6.2.2 Set Resolution and
Frame Rate (HDMI1, HDMI2, HDMI3 and DP only).
Screen
4096*[email protected]
The screen resolution and frame rate
The screen brightness
For related operations, please refer to 6.4.1 Adjust Screen
Brightness.
Port
1–20
The statuses of the Ethernet ports
Blue: Connected
Gray: Disconnected
OPT
1–4
The statuses of the OPT ports
Blue: Connected
Gray: Disconnected
Bottom line
Sync: Genlock
The sync signal currently used and the signal status
Sync: Active Input: Sync with the frame rate of the current
input source
Sync: Genlock: Sync with the frame rate of the Genlock
signal
Sync: Internal: Sync with the frame rate of the internal clock
of the device
Color code:
Blue: The signal is normal.
Red: The signal is abnormal.
For related operations, please refer to 6.4.6 Set Sync Source.
HDR10
The format of the dynamic range
For-related operations, please refer to 6.2.4 Set HDR (HDMI1,
HDMI2 and HDMI3 only).
3D
The 3D function status
The icon displayed: The 3D function is turned on.
The icon not displayed: The 3D function is turned off.
For related operations, please refer to 6.4.3 Enable 3D
Function.
XI'AN NOVASTAR TECH CO., LITD.

MX40 Pro LED Display Controller User Manual
www.novastar.tech
9
Classification
Content
Description
The output display status
: The display is frozen.
: The display is blacked out
For related operations, please refer to 7.5 Control Display
Status.
The temperature inside the chassis
4.2 Main Menu
On the home screen, press the knob to enter the main menu screen. When the device working mode is All-In-One
Controller, the main menu is shown in Figure 4-2. When the device working mode is Send-Only Controller, the Layer
Settings menu is not displayed.
Figure 4-2 Main menu
XI'AN NOVASTAR TECH CO., LITD.

MX40 Pro LED Display Controller User Manual
www.novastar.tech
10
5 Initial Screen Configuration
If the LED screen, cabinets, data flow and cabinets loaded by Ethernet ports can meet the following requirements,
you can configure the screen via the device front panel menu; otherwise, screen configuration in VMP will be your
ideal choice.
Screen: The LED screen must be a regular screen.
Cabinet: The cabinets must be regular ones of the same size, and function well.
Data flow: The data must run in the same way for all Ethernet ports and the data flow must be one of the
followings. The starting position of the data flow is the first cabinet of Ethernet port 1, and the connections are
made in sequence according to the serial number of the Ethernet port.
Cabinets loaded by Ethernet port: If nports are used to load the cabinets, the number of cabinets loaded by
each of the first (n–1) ports must be the same and the integral multiple of the number of cabinet rows or
columns, and it must be greater than or equal to the number of cabinets loaded by the last port.
5.1 Quick Configuration via Front Panel Screen
5.1.1 Set Input Source
Select the desired input source and complete the related settings, such as resolution and frame rate. If the
resolutions of the input source and screen are the same, the image can be displayed pixel to pixel.A lower frame rate
may result in image flickering, while a higher frame rate helps stabilize the display image.
Note
Input source settings are required for screen configuration in the Send-Only Controller working mode and not
required in the All-In-One Controller mode.
On the main menu screen, choose Input Settings > Select Input to select a video source.
Figure 5-1 Select input source
Perform the corresponding operations for the input source according to the input source type. For the SDI sources,
please skip this step.
External input sources (HDMI1, HDMI2, HDMI3, DP)
XI'AN NOVASTAR TECH CO., LITD.

MX40 Pro LED Display Controller User Manual
www.novastar.tech
11
a. Choose input source > EDID. The input source is HDMI1, HDMI2, HDMI3 or DP.
b. Set Mode to Custom or Standard, and then set the resolution and frame rate.
Custom: Set the resolution manually.
Standard: Select the desired resolution from the drop-down options.
c. After the settings are done, click Apply.
Internal sources
a. Choose Internal Source > Image, and then select a static picture or a motion picture.
b. When the relevant parameters of the image are displayed, set the parameters according to your actual
needs; otherwise, please skip this step.
c. Press the BACK button to go back to the upper-level menu and select Resolution.
d. Set Mode to Custom or Standard, and then set the resolution and frame rate.
e. After the settings are done, click Apply.
5.1.2 Load Cabinet Config File
When the cabinet cannot display images normally, send the cabinet configuration file (.rcfgx) to the cabinet and save
it to display the image normally. Before the operation, please import cabinet configuration file with VMP or store the
cabinet configuration file in the root directory of the USB drive and insert the USB drive into the USB connector on the
device front panel.
On the main menu screen, choose Screen Configuration > Send Cabinet Config File.
Figure 5-2 Send cabinet config file
Select the target configuration file.
Select Yes in the displayed dialog box.
After the configuration file is successfully sent, a message appears on the menu screen and then then you will
automatically return to configuration file screen.
Press the BACK button to go back to the upper-level menu.
Select Save to RV Card.
Select Yes in the displayed dialog box.
After the configuration file is successfully saved, a message appears on the menu screen.
5.1.3 Configure the Screen Quickly
Set the screen configuration parameters to quickly complete the cabinet connection, so that the LED screen can
display the input source image normally.
XI'AN NOVASTAR TECH CO., LITD.

MX40 Pro LED Display Controller User Manual
www.novastar.tech
12
On the main menu screen, choose Screen Configuration > Quick Configuration.
Figure 5-3 Quick configuration
Select Yes in the displayed dialog box.
Set screen configuration parameters as required.
Cabinet Row Qty: Set the quantity of cabinet rows.
Cabinet Column Qty: Set the quantity of cabinet columns.
Port 1 Cabinet Qty: Set the quantity of the cabinets loaded by Ethernet port 1.
Data Flow (Front View): Select the data flow for the cabinets loaded by Ethernet port 1.
H Offset: Set the horizontal offset of the displayed image.
V Offset: Set the vertical offset of the displayed image.
5.2 Free Screen Configuration via VMP
The VMP software can be used to configure either the regular screens or complex screens, and supports free wiring
of the cabinets, plus the ability of calculating the used loading capacity according to the cabinets that are actually
loaded. For the details of performing the free screen configuration, please refer to VMP Vision Management Platform
User Manual.
XI'AN NOVASTAR TECH CO., LITD.

MX40 Pro LED Display Controller User Manual
www.novastar.tech
13
6 Display Effect Adjustment
6.1 Apply Presets
Apply a saved preset in VMP to the device to quickly complete display effect adjustment.
On the main menu screen, select Preset.
The saved presets in VMP is displayed on the menu screen, as shown in Figure 6-1.
Figure 6-1 Presets
Select a preset.
6.2 Set External Input Source Parameters
6.2.1 View Input Source Information (HDMI1, HDMI2, HDMI3, DP, SDI)
View the attribute values of the external input source, including the resolution, frame rate, bit depth, color gamut, etc.
On the main menu screen, choose Input Settings > input source > Infoframe. The input source is HDMI1, HDMI2,
HDMI3, DP or SDI.
Figure 6-2 Input source information
When the device working mode is All-In-One Controller, the Select Input menu is not displayed.
View the input source information.
6.2.2 Set Resolution and Frame Rate (HDMI1, HDMI2, HDMI3 and DP only)
Set the resolution and frame rate of the external input source. If the resolutions of the input source and screen are the
same, the image can be displayed pixel to pixel. A lower frame rate may result in image flickering, while a higher
frame rate helps stabilize the display image.
On the main menu screen, choose Input Settings > input source > EDID. The input source is HDMI1, HDMI2,
HDMI3 or DP.
XI'AN NOVASTAR TECH CO., LITD.

MX40 Pro LED Display Controller User Manual
www.novastar.tech
14
Figure 6-3 EDID
When the device working mode is All-In-One Controller, the Select Input menu is not displayed.
Set Mode to Custom or Standard, and then set the resolution and frame rate.
Custom: Set the resolution manually.
Standard: Select the desired resolution from the drop-down options.
After the settings are done, click Apply.
6.2.3 Adjust Color (HDMI1, HDMI2, HDMI3, DP, SDI)
Set the infoframe override parameters of the external input source and adjust the color. The override parameter will
be used in the calculation of color adjustment. If the value of this parameter is not set manually, the value that comes
with the input source will be used.
On the main menu screen, choose Input Settings > input source > EDID. The input source is HDMI1, HDMI2,
HDMI3, DP or SDI.
Figure 6-4 Infoframe override
When the device working mode is All-In-One Controller, the Select Input menu is not displayed.
Set the override parameters as required.
Select Auto and the device will read the attribute value that comes with the input source.
Press the BACK button to go back to the upper-level menu.
Select Color Adjustment.
Set the related parameters.
Black level is used to adjust the contrast of the dark areas of the image.
6.2.4 Set HDR (HDMI1, HDMI2 and HDMI3 only)
Set the parameters used during the process of parsing HDR video sources.
On the main menu screen, choose Input Settings > input source > HDR. The input source is HDMI1, HDMI2 or
HDMI3.
XI'AN NOVASTAR TECH CO., LITD.

MX40 Pro LED Display Controller User Manual
www.novastar.tech
15
Figure 6-5 HDR
When the device working mode is All-In-One Controller, the Select Input menu is not displayed.
Select HDR and select the HDR format from the listed options.
Select Auto and the device will read the attribute value that comes with the input source.
Select HDR10 Parameters to complete the related settings. If the HDR format is SDR here, no parameters need to
be set.
HDR-related parameters include:
PQ mode: The mapping method of video source brightness.
−ST2084 (PQ): This mode 1:1 maps the brightness of the video source. The part that exceeds the maximum
screen brightness will still be adjusted to the maximum screen brightness.
−ST2086 (Linear mapping): This mode linearly maps the brightness of the video source. It globally adjusts the
video source brightness according to the maximum screen brightness to ensure that the ratio of the
brightness of the entire source content remains unchanged.
MaxCLL Override: When the MaxCLL Override switch is , the parameter takes effect.
MaxCLL: Override the maximum video source brightness and adjust the brightness to a specified value.
To restore the parameters to the defaults, select Reset.
6.3 Set Internal Input Sources
Select the internal source stored in the device and set the related parameters for screen testing and troubleshooting.
On the main menu screen, choose Input Settings > Internal Source > Image.
Figure 6-6 Internal source
When the device working mode is All-In-One Controller, the Select Input menu is not displayed.
Select a static picture or a motion picture.
When the relevant parameters of the image are displayed, set the parameters according to your actual needs;
otherwise, please skip this step.
Press the BACK button to go back to the upper-level menu and select Resolution.
Set Mode to Custom or Standard, and then set the resolution, frame rate and bit depth.
XI'AN NOVASTAR TECH CO., LITD.

MX40 Pro LED Display Controller User Manual
www.novastar.tech
16
Figure 6-7 Resolution parameters
Custom: Set the resolution manually.
Standard: Select the desired resolution from the drop-down options.
After the settings are done, click Apply.
6.4 Set Output Parameters
6.4.1 Adjust Screen Brightness
Adjust and save the screen brightness.
On the main menu screen, select Screen Brightness and then the brightness value becomes editable.
Figure 6-8 Screen brightness (theAll-In-One Controller mode as example)
Rotate the knob to adjust the brightness to the target value, and then press the knob to confirm.
Choose Screen Configuration > Save to RV Card.
Figure 6-9 Save to RV card
Select Yes in the displayed dialog box.
After the brightness value is successfully saved, a message appears on the menu screen.
6.4.2 Adjust Gamma and Color Temperature
Adjust and save the Gamma and color temperature.
XI'AN NOVASTAR TECH CO., LITD.

MX40 Pro LED Display Controller User Manual
www.novastar.tech
17
On the main menu screen, choose Advanced Functions > LED Screen Color.
Figure 6-10 LED screen color
Adjust the Gamma value.
1. Select Gamma and then the value becomes editable.
2. Rotate the knob to adjust the Gamma to the target value, and then press the knob to confirm.
Adjust the color temperature value.
1. Select Color Temperature and then the value becomes editable.
2. Rotate the knob to adjust the temperature to the target value, and then press the knob to confirm.
If you want to restore the parameters to the defaults, select Reset.
Press the BACK button to go back to the main menu, and then choose Screen Configuration > Save to RV Card.
Figure 6-11 Save to RV card
Select Yes in the displayed dialog box.
After the values are successfully saved, a message appears on the menu screen.
6.4.3 Enable 3D Function
Turn on the 3D function and set the related parameters.
On the main menu screen, choose Advanced Functions > 3D.
Figure 6-12 3D
Turn on the 3D function by toggling on this switch .
Set the related parameters.
XI'AN NOVASTAR TECH CO., LITD.