NuTone HLB11 User manual

SPECIFICATION SHEET
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
Broan-NuTone LLC, 926 West State Street, Hartford, Wisconsin 53027 (1-800-637-1453)
Broan-NuTone Canada, Inc., 1140 Tristar Drive, Mississauga, Ontario, L5T 1H9 (1-888-882-7626)
8” x 12”
DUCT
Powerful yet quiet blowers - exhaust the cooking
area from a remote location.
FEATURES
BLOWER:
●LowRPMforquietoperation
●Resilientanti-vibrationmounts
●Dynamically-balanced,galvanizedsteel,centrifugal
blowerwheelforquiet,efficientperformance
●Permanentlylubricated,thermallyprotectedmotor
●Plug-in motor rated at 120 VAC
●Designedforcontinuousoperation
HOUSING:
●Ruggedgalvanizedsteel
●8-position mounting brackets for easy installation
andgreateradaptabilitytovariousmounting
requirements
●Automaticbackdraft damperlocated withinexhaust
ductconnector
●Factory-shippedinhorizontaldischargeposition
●May be converted to vertical discharge
●Suitable for kitchen installations
ACCESSORIESINCLUDED:
●8-inchx 12-inchintegrated ductconnectors
●Two(2)8-inchx12-inchto10-inch-round transitions
●Hanger kit - for additional installation flexibility
TYPICALSPECIFICATION
In-LineBlowershallbeModelHLB9,(HLB11).
Unit shall have galvanized steel housing. Housing to
haveadjustablemountingbrackets.
Blowertoincludehangerkit,two(2)8-inchx12-inchto
10-inch-roundtransitions,and8-inchx12-inchintegrated
duct connectors.
Automaticbackdraftdampertobelocatedwithinexhaust
duct connectors. Duct connectors, blower assembly
andwiringplateshallbeadjustableforeitherhorizontal
or vertical installation.
Blower unit shall be removable from housing and will
haveagalvanizedsteel,centrifugal-typeblowerwheel.
Motor to be permanently lubricated and mounted with
resilientanti-vibrationmounts.
Airdelivery shallbe noless thanlistedfor eachmodel.
AllairratingsshallbecertifiedbyHVI.UnitstobeULand
cUL listed.
50C 99043709B
* Performanceratingsincludetheadditionofa10”roundtransitionon
inlet and outlet.
SPECIFICATIONS
Model Volts Hz Amps CFM Duct Weight
HLB9 120 60 3.0 700(V) 8” x 12” * 73.0 lbs.
800(H)
HLB11 120 60 5.0 1000(V) 8” x 12” * 73.1 lbs.
1100(H)
IN-LINE BLOWERS
MODELS HLB9 & HLB11
For use with Broan Elite and NuTone Premier Hoods.