NuTone HLB3 User manual

SPECIFICATION SHEET
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
Broan-NuTone LLC, 926 West State Street, Hartford, Wisconsin 53027 (1-800-637-1453)
Broan-NuTone Canada, Inc., 1140 Tristar Drive, Mississauga, Ontario, L5T 1H9 (1-888-882-7626)
8” ROUND
DUCT
CONNECTOR
IN-LINE BLOWER
MODEL HLB3
For use with Broan Elite and NuTone Premier Hoods.
Powerful yet quiet blower - exhausts the cooking
area from a remote location.
FEATURES
BLOWER:
●Low RPM for quiet operation
●Resilientanti-vibrationmounts
●Dynamically-balanced,galvanizedsteel,centrifugal
blowerwheelforquiet,efficientperformance
●Permanentlylubricated,thermallyprotectedmotor
●Plug-in motor rated at 120 VAC
●Designedforcontinuousoperation
HOUSING:
●Ruggedgalvanizedsteel
●8-position mounting brackets for easy installation
andgreateradaptabilitytovariousmounting
requirements
●Automaticbackdraftdamperlocatedwithinexhaust
ductconnector
●Factory-shippedinhorizontaldischargeposition
●May be converted to vertical discharge
●Suitable for kitchen installations
ACCESSORIESINCLUDED:
●8-inchroundintegratedductconnectors
●One(1)8-inchto10-inch-roundtransition
●Hanger kit - for additional installation flexibility
TYPICALSPECIFICATION
In-LineBlowershallbe ModelHLB3.
Unit shall have galvanized steel housing. Housing to
haveadjustablemountingbrackets.
Blowertoinclude hanger kit, one (1) 8-inch to 10-inch-
round transition, and 8-inch round integrated duct
connectors.
Automaticbackdraftdampertobelocatedwithinexhaust
duct connectors. Duct connectors, blower assembly
andwiringplateshallbeadjustableforeitherhorizontal
or vertical installation.
Blower unit shall be removable from housing and will
haveagalvanizedsteel,centrifugal-typeblowerwheel.
Motor to be permanently lubricated and mounted with
resilientanti-vibrationmounts.
Air delivery shall be no less than listed. All air ratings
shall be certified by HVI. Unit to be UL and cUL listed.
50C 99043705B
* Performanceratingsincludetheadditionofa10”round
transition on inlet.
SPECIFICATIONS
Volts Hz Amps CFM Duct Weight
120 60 2.6 260(V) 8”Round* 27.8 lbs.
280(H)