NUTRIBULLET Blender Combo User manual

User guide.

32
Save these instructions!
FOR HOUSEHOLD USE ONLY
consecutive blending
cycles that exceed one
minute total.
• Blending causes
ingredients to heat up,
which builds pressure
in the Cup over time.
Continuous blending for
more than one minute
may cause the Cup
to separate, exposing
the blade or expelling
heated contents and
causing injury.
DO NOT leave blended
foods in a sealed cup
for prolonged periods
of time.
• Blended mixtures can
spoil and ferment,
increasing pressure
when left inside the
Cup. This may cause
the Cup to separate if
open from the Motor
Base, which may result
in bodily injury from
expelling hot contents
or exposed blades.
• Only access the
blended contents
through the Sip and
!
PERSONAL SAFETY
Failure to follow all
instructions regarding
your nutribullet®
Portable Blender
may result in serious
personal injury, death,
or property damage.
DO NOT blend hot,
warm, carbonated,
or eervescent
ingredients.
Remove all utensils
and non-food items
from Cup before
operating as it may
result in bodily injury or
damage to the blade
and unit.
• Only blend room-
temperature,
refrigerated or frozen
ingredients (21°C or
cooler). Always check
all ingredients before
blending.
• Such use may over-
pressurize the
nutribullet®Cup,
causing the Cup and
Important safeguards.
When operating your nutribullet® Portable Blender, remember:
SAFETY COMES FIRST
Warning! To avoid the risk of serious injury or damage, carefully
read all instructions before operating your nutribullet® Portable
Blender. Basic safety precautions, including the following
important information, should always be observed when using
any electrical appliance.
If you let anyone else use your nutribullet®Portable Blender, ensure
they understand the health and safety information in this User
Guide and any additional safety or usage instructions. Each person
using a device should completely read the User Guide to become
familiar with the safe operation of the unit.
Motor Base to separate
while operating. This
may result in bodily
injury from expelling
hot content or
exposed blades.
• Carbonated and
eervescent ingredients
(e.g., soda, baking
powder, baking soda,
yeast, some batters,
cake mix, dry ice,
or other things that
become bubbly) release
gasses that increase
pressure within the Cup
when blending. A build
up of pressure can
cause the cup
to separate from the
blade expelling the
contents of the cup
and causing injury.
Some protein powders
include eervescent
ingredients. Always
check the ingredients
of all supplements
before blending.
DO NOT blend contents
for more than one
minute. Do not run
WARNING!
WARNING!
WARNING!

54
Carry Lid by carefully
opening the Lid after
blending.
• If the Cup is hot or
warm to the touch,
the contents may
be HEATED and
PRESSURIZED.
If this happens, take
these steps:
- LEAVE ALONE, DO
NOT OPEN. Leave
the Cup where it is
and do not touch it or
allow others to touch
it. NEVER attempt
to separate the Cup
from the Motor Base
as this can result in
bodily injury.
- Do not blend again.
- Allow the Cup to cool
for at least 30 minutes.
If still warm, allow for
more cooling time.
- Once cool to the
touch, slowly open
the Lid, while pointing
away from your
face and body. Pour
contents out into a
separate vessel.
• ALWAYS ensure the Cup
is securely locked on
the Motor Base before
blending. The motor will
not turn on unless the
Cup is situated in the
locked position.
• ONLY operate the
unit with the Lid
cover in place.
• DO NOT exceed the
MAX line. Exceeding the
MAX line can result in
leakage or stop page of
the blade.
• DO NOT remove the
Cup or Lid while the unit
is in operation.
• DO NOT overfill the Cup
with ice as it may stop
the blades from turning
resulting in damage
to the unit or injury.
Always make sure the
liquid and ingredients
do not exceed MAX line
before blending.
• Do not use the Cup if
you detect cracking,
cloudiness, or
other damage.
• Do not attempt to
defeat any safety
interlock mechanisms.
• To avoid the risk of
electrical shock, fire or
bodily injury, DO NOT
charge or handle the
unit if it is wet, or in an
area that could get
wet, or handle with
wet hands.
• Do not charge your
device around
flammable materials,
on your bed or couch,
or on top of any type
of paper.
• Only charge your
device with the power
cord that came with
it. Using incompatible
parts or aftermarket
parts may damage your
nutribullet®Portable
Blender or create safety
hazards that may
cause personal injury
or damage.
• Do not use a rapid
charger or higher
wattage charger.
• Failure to take the
following precautions
can result in serious
personal injury, death
from electric shock or
fire, or damage to
your device.
• Don’t charge or store
batteries or devices
on combustible or
insulating surfaces
such as beds, sofas,
or carpet, and keep
them away from highly
flammable materials
such as blankets,
clothing, and paper.
• Do not charge in an
area of extreme
heat or cold.
• Only order replacement
parts from:
bulletbrands.com.au /
bulletbrands.co.nz
or by contacting
Customer Service:
AU: 1300 285 538 /
NZ: 0800 232 633.

76
Blades are sharp!
Handle with care to
avoid bodily injury.
•Do not touch the sharp
edges of the blades.
• Do not place hands
or fingers near
the blades when
attaching the Cup to
the Motor Base.
• Handle with care
when washing the
blade by hand.
• Always make sure the
power is o and the
charger is unplugged
when assembling,
disassembling, or
cleaning the blade or
Motor Base.
• Do not store the
Motor Base with the
blades exposed.
Always attach the Cup
to the Motor Base.
NEVER put your hands
inside the cup or near
the blade when the unit
is running.
• Do not remove the
Cup or Lid until the
blades have completely
stopped. Blades can
still be rotating when
the Lid is removed.
Not following these
instructions may
result in bodily injury,
property damage, or
damage to your unit.
• This appliance is not
intended for use by
persons (including
children) with reduced
physical, sensory, or
mental capabilities,
or lack of experience
and knowledge,
unless they are closely
supervised and
instructed concerning
use of the appliance by
a person responsible
for their safety.
Close supervision is
necessary when any
appliance is used by or
near children. Children
should be supervised
to ensure that they
do not play with the
appliance.
PRODUCT SAFETY
Discontinue use if
the blade is bent
or damaged.
• Routinely inspect the
blades for damage,
and if detected, contact
Customer Service for
a replacement.
• Do not blend stone
fruit in this appliance
unless pits/seeds
have been removed.
Hard ingredients may
damage the blade.
• The blades may stop
turning if the Cup is
overfilled. If this occurs,
please refer to the
Errors section in this
User Guide.
DO NOT operate your
nutribullet®Portable
Blender while driving,
operating machinery,
cycling, walking,
or engaging in
other activities
that require your
undivided attention.
• Do not expose your
nutribullet®Portable
Blender to extreme
temperatures, as this
can cause damage
to the batteries,
seals, and other
parts of the device.
• Do not place your
nutribullet®Portable
Blender on uneven or
unstable surfaces.
• Do not dry your
device with a hair
dryer, clothes dryer,
conventional oven, or
microwave oven. If your
device becomes wet,
gently wipe the exterior
with a clean, dry cloth.
• Do not use your
device near water
or in wet, rainy, or
snowy conditions.
• Do not use your device
near an open flame or
other heat source; near
areas of excessive dirt,
dust, oil, or chemicals;
or in direct sunlight.
WARNING! WARNING!
WARNING! WARNING!

98
• Do not leave your
nutribullet®Portable
Blender inside your
vehicle, especially
in the summer or winter.
Prolonged exposure
to extreme temperatures
can cause the
batteries to rupture,
or explode
• Periodically inspect your
nutribullet®Portable
Blender components
for damage or wear
that may impair proper
functioning or create a
safety hazard.
• Be aware of possible
hazards when
charging, using, or
storing your nutribullet®
Portable Blender.
• Do not use this blender
for anything other its
intended use.
• Never operate your
nutribullet®Portable
Blender if the Cup
is empty.
• Do not insert any
object other than the
appropriate charger
into the USB-C port.
Do not allow dust to
accumulate inside
the port.
• Do not crush, drop, or
damage the Motor
Base. Do not operate
if the Motor Base
is damaged in any
manner. Contact
Customer Service for
assistance by visiting
bulletbrands.com.au /
bulletbrands.co.nz.
• Use only nutribullet®
attachments/
accessories specifically
designed for your
nutribullet®Portable
Blender. Always use
genuine nutribullet®
replacement parts
and accessories.
Aftermarket parts are
not made to nutribullet®
specifications and may
damage your unit or
cause serious injury.
• The use of attachments
including canning jars,
is not recommended by
the manufacturer may
cause a risk or injury
to persons.
• Do not attempt to clean
the Motor Base by
immersing in water or
other cleaning liquids.
Only gently wipe and
dry with a clean cloth.
• Only the Cup and Lid
are dishwasher safe on
Top Rack without the
heat or sanitize cycle.
NEVER PLACE THE
MOTOR BASE IN THE
DISHWASHER.
Modification, improper
use, and failure to
follow instructions can
increase the risk
of serious personal
injury, death, or
property damage.
CHARGING YOUR
PORTABLE BLENDER
The blender’s battery
can be charged using
the USB cable provided
and a compatible
power supply unit (PSU).
Charging the battery
using an incorrect PSU
can cause damage to
the battery, including
overheating, that can
lead to fires.
• Place the blender on a
flat surface close to the
USB power outlet.
• Connect the motor
base to the USB power
outlet port by using the
USB cable supplied.
Ensure the cable is
fully unwound.
• Disconnect the USB
cable from the USB
port and the motor
base once the portable
blender is charged. If
using a USB PSU, switch
o the power from the
power point and unplug
the USB power adaptor
prior to disconnecting
the USB cable.
• Use only approved
power supplies rated
100V to 240V certified
for General Purpose use
to charge this device.
The PSU’s rated output
should be 5V 2A MAX.
Do not use non
approved PSU’s.
WARNING!

1110
• Do not use in wet
conditions, or immerse
the cord, plug, or Motor
Base in water or
other liquids.
• Do not operate with
a damaged cable or
appliance malfunction,
or if or if the Motor
Base has been
dropped or damaged
in any manner. Contact
Customer Service for
assistance by visiting
bulletbrands.com.au /
bulletbrands.co.nz.
• Always POWER OFF
and DISCONNECT the
nutribullet®Portable
Blender when it
is not in use, and
BEFORE assembling,
disassembling,
changing accessories,
or cleaning.
Use only the power
cord that came with
your nutribullet®
Portable Blender
to charge.
• Exposed device cables
and cords pose a
potential tripping
hazard. Arrange all
cables and cords so
that people and pets
are not likely to trip
over or accidentally
pull on them as they
move around or walk
through the area.
• When positioning your
device or Power Supply
Unit/Charger, ensure
that the cords are not
bent sharply and that
the connectors are not
pushed against a wall
or hard surface.
• Do not allow pets or
children to bite or chew
on cables and cords.
• When disconnecting
the power cord, pull
on the plug—do not
pull on the cord.
• Do not let the charging
cable touch hot
surfaces or any extreme
heat source, or become
knotted, tangled,
or frayed.
• Do not grab or carry
your device by the
charging cable or cord.
• Do not let the charging
cable hang over the
edge of a table
or counter.
LITHIUMION
BATTERIES
• Your nutribullet®
Portable Blender
contains rechargeable
Lithion-Ion batteries.
The batteries are not
replaceable and must
be recycled or disposed
of properly. Consult
your local council
for information
regarding available
recycling and/or
disposal options.
Improper disposal
may result in injury,
death, or property
damage as a result
of fire, overheating,
or explosion. Lithium-
Ion batteries contain
elements that may
pose health risks to
individuals if they are
allowed to leach into the
groundwater supply.
• The motor base is
equipped with a
Lithium-Ion battery,
and it is very important
to never dispose of it
in regular household
waste. Lithium-Ion
batteries in compacting
rubbish trucks pose a
risk of ignition.
• Opening and/or
repairing or attempting
to replace the batteries
to your device can
cause electric shock,
device damage, fire,
and personal injury, or
property damage.
• Do not expose the
Motor Base containing
the Lithion-Ion battery
pack to fire or excessive
heat. Exposure to fire
or temperatures above
130°C may damage the
batteries and cause an
explosion.
• Do not recharge
your nutribullet®
Portable Blender
near a fire, heat
source, or in extremely
hot conditions.
WARNING!

1312
• Recommended
storage and ambient
charging temperature:
10°C−40°C.
• Do not use your unit
in any area with a
potentially explosive
atmosphere (e.g.,
fueling areas or fuel
service stations, below
decks on boats or other
vessels, fuel and/or
chemical transfer and
storage facilities, and
areas where flammable
chemicals or particles,
such as grain dust or
metal powders have
collected in the air). In
such areas, sparks can
occur and cause an
explosion or fire.
• Do not use your unit
if the Motor Base is
overheated, has an
odor, is bulging, or
changes in color/shape.
!
Save these
instructions!

1514
16 What’s included
17 Assembly guide
18 LED light indicator status
18 Charging
19 Settings
20 Errors
22 Using the nutribullet®
Portable Blender
24 Care and maintenance
24 Replacement parts
26 One-year limited warranty
Contents.
Thank you for purchasing the nutribullet®Portable Blender.

Before first use.
CLEAN UNIT:
See Care and Maintenance
section on page 24.
CHARGE UNIT:
Plug the smaller end of the
included USB-C Cable into the
slot right below the Power
button (on the front of the
Motor Base) and the larger
end of the cable into the
General Purpose Power Supply.
• We recommend fully
charging the unit before
using it for the first time.
It takes 60-90 minutes to
reach a full charge.
Please see LED Status Light
Indicator section on pages 18-20.
WARNING! Do not charge if your
unit or the USB-C port is wet to
avoid risk of fire or bodily injury.
1716
Assembly guide.What’s included.
590ml cup
to-go lid
motor base 590ml cup
USB-C
charging cable
blade assembly
measurement markings
alignment marking
LED status light
power button
motor base
USB-C charging Cable
16
20
400
500
MAX
ml
100
200
300
8
4
12
20oz cup
USB-C charging slot
Spout lid with handle
Product configurations may vary. To see our full list of nutribullet®accessories
please visit bulletbrands.com.au / bulletbrands.co.nz.
16
20
400
500
MAX
ml
100
200
300
8
4
12
locking latch
release button

1918
LED light
indicator status.
1
2
3
4
5
6
No power
All LEDs o.
Fully charged
All LEDs light solid blue.
Wake
Press button once to wake
up your blender. When the
ring is solid blue, you are
ready to blend.
Blend mode
Blue LEDs circulate clockwise.
Press the Power button to start
a 20-second cycle.
Sleep
After 2 minutes of inactivity, your
blender will automatically go
into sleep mode. When the ring is o,
the blender is o.
Low power
LED 1 flashes red.
Charging
LEDs blink to solid blue in
clockwise order.
Battery check
Press and hold the Power button
for 2 seconds to check the
battery level remaining.
Charging. Settings.
The nutribullet®Portable Blender’s
indicator has six LED light bars that
appear red or blue according to
the unit’s operational status. See
below for details.